PREN 2833-1 : 200P2
Current
The latest, up-to-date edition.
AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
English
28-11-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
3.1 Batch
3.2 Preimpregnate
3.3 Storage life (NOTE: sometimes known as shelf life)
3.4 Work life
3.5 Inclusion
3.6 Woven fabric
3.7 Unidirectional sheet and tape
3.8 Orientation of fibres
3.9 Material standard
3.10 Individual product specification (IPS)
3.11 Qualification
3.12 Side qualification
3.13 Screening tests
3.14 Qualification testing
3.15 Mandated body
3.16 Compatibility
3.17 Release testing/Supplier quality control testing
3.18 Acceptance testing
4 Requirements
4.1 General requirements
4.2 Workmanship
4.3 Supply of Defective material
4.4 Physical, chemical and mechanical requirements
5 Qualification
5.1 Introduction
5.2 Quality assurance
5.3 Product qualification
5.4 Health and safety
6 Batch control
6.1 General
6.2 Release tests
6.3 Warranty
6.4 Sampling
7 Preparation for delivery
7.1 Marking
7.2 Packaging
7.3 Storage before shipment
7.4 Delivery date
7.5 Shipping conditions
7.6 Order endorsement
Specifies glass fibre thermosetting preimpregnates for aerospace applications. Applicable to material containing unidirectional or woven fabric supplied as flat sheet or wound onto reels.
| Committee |
C7
|
| DocumentType |
Draft
|
| Pages |
35
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 2833-1:1998-04 (Draft) | Identical |
| 93/706616 DC : 0 | Identical |
| PREN 2833-3 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP 180 DEGREES C FOR CONTINUOUS USE UP TO 120 DEGREES C |
| PREN 2833-2 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UP 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| BS EN 2833-005:2013 | Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification Glass fabric/phenolic resin preimpregnate |
| PREN 4385 : 200P2 | AEROSPACE SERIES - NON-METALLIC MATERIALS - GENERAL ORGANISATION OF STANDARDISATION - LINKS BETWEEN TYPES OF STANDARDS |
| I.S. EN 2833-005:2013 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| UNI EN 2833-005 : 2014 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| EN 2833-005:2013 | Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate |
| EN 2746:1998 | Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method |
| PREN 6032 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE GLASS TRANSITION TEMPERATURES |
| PREN 6031 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF IN-PLANE SHEAR PROPERTIES - (+/-45 DEGREE C TENSILE TEST) |
| PREN 6039 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE EXOTHERMIC REACTION DURING CURING OF PREPREG MATERIAL |
| EN 3783:2013 | Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties |
| EN 2823:2017 | Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics |
| EN 2825:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
| EN 2597:1998 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction |
| EN 2332:1993 | Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of the resin flow |
| ASTM C 393 : 2000 | Standard Test Method for Flexural Properties of Sandwich Constructions |
| PREN 6043 : 200P1 | AEROSPACE SERIES - THERMOSETTING RESIN SYSTEMS - TEST METHOD - DETERMINATION OF GEL TIME AND VISCOSITY |
| EN 2329:1993 | Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of mass per unit area |
| PREN 2489 : 1988 | FIBRE REINFORCED PLASTICS - DETERMINATION OF THE ACTION OF LIQUID CHEMICALS |
| EN 6033:2015 | Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| EN 2377:1989 | Aerospace series - Glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength |
| EN 2330:1993 | Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter |
| EN 3042 : 1991 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| EN 2850:2017 | Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction |
| EN 2243-4:2005 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test |
| EN 2747:1998 | Aerospace series - Glass fibre reinforced plastics - Tensile test |
| PREN 6041 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS ON NON-METALLIC MATERIALS (UNCURED) BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
| EN 2826:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
| PREN 6040 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS OF THERMOSET SYSTEMS BY HIGH PERFORMANCE - LIQUID CHROMATOGRAPHY (HPLC) |
| ASTM D 2520 : 2013 | Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650<sup>o</sup>C |
| EN 2743:2001 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| PREN 6042 : 200P1 | AEROSPACE SERIES - ORGANIC COMPOUNDS - TEST METHOD - ANALYSIS BY INFRARED SPECTROSCOPY |
| EN 2243-3:2005 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core |
| EN 2374:1991 | Aerospace series - Glass fibre reinforced mouldings and sandwich composites - Production of test panels |
| EN 2331:1993 | Aerospace series - Textile glass fibre preimpregnates - Test methods for the determination of the resin and fibre content and mass of fibre per unit area |
| EN 2824:2011 | Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.