PREN 2565 : 200P2
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - PREPARATION OF CARBON FIBRE REINFORCED RESIN PANELS FOR TEST PURPOSES
Available format(s)
Hardcopy , PDF
Withdrawn date
08-12-2023
Superseded by
Language(s)
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Principle
3 References
4 Equipment and materials recommended for the preparation of
panels by methods A and B
5 Working procedure
6 Report of preparation of test panel
Describes the preparation of panels with any desired fibre orientation of unidirectional oriented carbon fibre or fabric with thermosetting resins.
| Committee |
C7
|
| DocumentType |
Draft
|
| Pages |
12
|
| ProductNote |
Superseded by EN 2565:2013
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NF EN 2565 : 2017 | Identical |
| DIN EN 2565:2013-12 | Identical |
| BS ISO 1268-4 : 2005 | FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 4: MOULDING OF PREPREGS |
| PREN 6036 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED, UNNOTCHED AND FILLED HOLE COMPRESSION STRENGTH |
| PREN 6060 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE TENSILE SINGLE LAP SHEAR STRENGTH |
| PREN 6066 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF TENSILE STRENGTH OF A TAPERED AND STEPPED JOINTS |
| PREN 6038 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE COMPRESSION STRENGTH AFTER IMPACT |
| PREN 6030 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE MECHANICAL DEGRADATION DUE TO CHEMICAL PAINT STRIPPERS |
| PREN 6032 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE GLASS TRANSITION TEMPERATURES |
| PREN 6033 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 1 - G[IC] |
| PREN 6039 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE EXOTHERMIC REACTION DURING CURING OF PREPREG MATERIAL |
| I.S. EN 6033:2015 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 1 - GIC |
| BS EN 6034:2015 | Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode II. GIIC |
| I.S. EN 6035:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED AND UNNOTCHED TENSILE STRENGTH |
| I.S. EN 6038:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE COMPRESSION STRENGTH AFTER IMPACT |
| I.S. EN 6036:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED, UNNOTCHED AND FILLED HOLE COMPRESSION STRENGTH |
| ASD-STAN prEN 6061 P1:1995 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF SANDWICH FLEXURAL STRENGTH 4 POINT BENDING |
| PREN 2850 : 200P2 | AEROSPACE SERIES - CARBON FIBRE THERMOSETTING RESIN UNIDIRECTIONAL LAMINATES - COMPRESSION TEST PARALLEL TO FIBRE DIRECTION |
| PREN 6037 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF BEARING STRENGTH |
| PREN 6031 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF IN-PLANE SHEAR PROPERTIES - (+/-45 DEGREE C TENSILE TEST) |
| PREN 6044-2 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED EPOXY PREPREG - TECHNICAL SPECIFICATION - QUALIFICATION PROGRAMM/BATCH RELEASE TESTING - UNIDIRECTIONAL TAPE 180 DEGREE C CURING CLASS |
| I.S. EN 6032:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE GLASS TRANSITION TEMPERATURES |
| DIN EN 2561:1995-11 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - TENSILE TEST PARALLEL TO THE FIBRE DIRECTION |
| DIN EN 6061:1996-04 (Draft) | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF SANDWICH FLEXURAL STRENGTH, 4 POINT BENDING |
| PREN 6034 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 2 - G[IIC] |
| PREN 6044-1 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED EPOXY PREPREG - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
| DIN EN 2562:1997-05 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - FLEXURAL TEST PARALLEL TO THE FIBRE DIRECTION |
| DIN EN 2563:1997-03 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - DETERMINATION OF THE APPARENT INTERLAMINAR SHEAR STRENGTH |
| BS EN 6033:2015 | Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode I. GIC |
| BS EN 6038:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact |
| EN 6035:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength |
| EN 2562:1997 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| PREN 6035 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED AND UNNOTCHED TENSILE STRENGTH |
| PREN 6063 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF MATERIAL DEGRADATION DUE TO CHEMICAL PRODUCTS |
| UNE-ISO 1268-4:2012 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
| BS EN 2563:1997 | Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength |
| BS EN 6036:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of notched, unnotched and filled hole compression strength |
| BS EN 6032:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures |
| EN 2561:1995 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction |
| EN 6034:2015 | Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC |
| EN 6032:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures |
| EN 2563:1997 | Aerospace series - Carbone fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| EN 6033:2015 | Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC |
| EN 6036:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength |
| EN 6038:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact |
| ISO 1268-4:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs |
| I.S. EN 6034:2015 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 2 - GIIC |
| BS EN 6035:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of notched and unnotched tensile strength |
| EN 2743:2001 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.