PREN 2243-4 : 200P1
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - TEST METHOD - PART 4: METAL-HONEYCOMB CORE FLATWISE TENSILE TEST
Hardcopy , PDF
07-12-2023
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
0 Introduction
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols and abbreviations
4 Health and safety
5 Principle/Technique
6 Resources
6.1 Apparatus
6.2 Materials/Reagents
6.3 Qualification of personnel
7 Test samples/Test pieces
7.1 Materials
7.2 Surface preparation before bonding
7.3 Bonding
7.4 Dimensions of panels (type B test piece)
7.5 Storage of test panels after bonding
7.6 Cutting of panels and preparation of type B test
pieces
8 Testing procedure
8.1 Dimensions measurement
8.2 Fixing
8.3 Test temperatures
8.4 Loading
9 Expression of results
10 Designation
11 Test report
Defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints, at ambient or other temperatures. Defines two types of test pieces: Type A: direct bonding of honeycomb to facing blocks; Type B: bonding of honeycomb between the two facings sheets, then bonding of the whole to the facing blocks.
| Committee |
C7
|
| DocumentType |
Draft
|
| Pages |
8
|
| ProductNote |
Superseded by EN 2243-4:2005
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| PREN 3464 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - PLATE - 6 MM < A <= 100 MM |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| PREN 2540 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA |
| EN 2497:1989 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| PREN 2090 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T3 - CLAD SHEET AND STRIP - 0,3 MM <= A <= 6 MM |
| PREN 3456 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| PREN 3487 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 4385 : 200P2 | AEROSPACE SERIES - NON-METALLIC MATERIALS - GENERAL ORGANISATION OF STANDARDISATION - LINKS BETWEEN TYPES OF STANDARDS |
| PREN 2419 : 200P3 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T351 - PLATE - 6 MM < A <= 80 MM |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.