PREN 2043 : 200P1
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS)
Withdrawn date
07-12-2023
Superseded by
Sorry this product is not available in your region.
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Quality assurance
Defines general requirements for semi-finished product qualification of EN metallic materials (excluding forgings and castings).
| Committee |
C5
|
| DocumentType |
Draft
|
| ProductNote |
Superseded by EN 2043:2013
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NF EN 2043 : 2014 | Identical |
| DIN EN 2043:2013-09 | Identical |
| I.S. EN 3359:2007 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| XP PREN 4258 : 1996 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| PREN 2486 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - FORGING STOCK |
| PREN 2539 : 200P2 | AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 2278 : 1 | AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM |
| PREN 2203 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 4573 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 3671 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 3531 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3490 : 200P2 | |
| PREN 3487 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 3638 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - CONSUMABLE ELECTRODE REMELTED - SOLUTION AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM |
| PREN 3524 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 2 MM <= A <= 6 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 2402 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NICR20CO3FE3 - ANNEALED - WIRE - D <= 10 MM |
| PREN 2815 : 200P3 | |
| PREN 2917 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1 070 MPA |
| PREN 2947 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3004 (X10CRNI18-09) - AIR MELTED - NON HEAT TREATED - COLD DRAWN WIRE - A OR D <= 2,3 MM |
| PREN 2475 : 200P1 | |
| PREN 2774 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 3346 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2014A-T3 - DRAWN TUBE FOR STRUCTURAL APPLICATIONS - 0,6 MM <= A <= 12,5 MM |
| PREN 3365 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4274 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4282 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T37 - PLATE - 6 MM < A <= 40 MM |
| PREN 4273 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM |
| PREN 4290 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - FORGING STOCK |
| PREN 4258 : 1995 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| PREN 4658 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| PREN 4721 : DRAFT 2012 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <=200 MM - 900 MPA <= R[M] <= 1050 MPA |
| PREN 4659 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| PREN 4275 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T76511 - EXTRUDED BAR AND SECTION - A OR D <= 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4318 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM - R[M] >= 960 MPA |
| PREN 4341 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-W46431 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4369 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 4462 : 200P1 | |
| PREN 4328 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1601 (X18CRWNI13-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4338 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3902 (NICR25MO10C) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4545 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 20 MM <= A <= 50 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 4467 : 200P1 | |
| I.S. EN 4347:2007 | AEROSPACE SERIES STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM |
| PREN 3994 : 200P1 | AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - NON HEAT TREATED - REMELTING STOCK |
| PREN 3816 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP - A <= 3 MM - R[M] >= 800 MPA |
| PREN 4720 : DRAFT 2012 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| PREN 4263 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA |
| PREN 3460 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - BAR FOR MATCHING - A OR D <= 150 MM - R[M] >= 390 MPA |
| PREN 3479 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA |
| PREN 3512 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - HARDENED AND TEMPERED - HOLLOW BARS FOR THE MANUFACTURER OF BEARINGS - 3,5 MM <= A <= 55 MM |
| PREN 3525 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 6 MM < A <= 20 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 3680 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOLUTION TREATED - SEAMLESS TUBE FOR PRESSURE APPLICATIONS - D <= 50 MM; 0,5 MM <= A <= 5 MM - 500 MPA <= R[M] <= 750 MPA |
| PREN 4656 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| PREN 4500-004 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| PREN 4325 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1302 (NICR20CO13MO4TI3AI) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4334 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1806 (15CRMNMOV5-4-9-3) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4340 : 200P1 | AEROSPACE SERIES - MAGNESIUM ALLOY MG-W68001 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4377 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4383 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - REMELTING STOCK |
| PREN 4463 : 200P1 | |
| PREN 4568 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 6 MM |
| PREN 3969 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4292 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-R39002 - FORGING STOCK |
| PREN 4344 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1002 (X13CR13) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4373 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - ANNEALED - SEAMLESS TUBE - D <= 75 MM, A <= 3 MM |
| PREN 4094 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - REMELTING |
| PREN 4469 : 200P1 | |
| I.S. EN 3361:2007 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - 1070 MPA <= R[M] <= 1220 MPA |
| I.S. EN 2213:2012 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
| I.S. EN 3528:2013 | AEROSPACE SERIES - STEEL X2NICOMO18-8-5 (1.6359) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| 11/30242528 DC : DRAFT JAN 2011 | BS EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| 06/30146139 DC : 0 | EN 2465 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - SOFTENED 450 -RM - 680 MPA - BAR FOR MACHINING, 4 - DE - 100 |
| BS EN 4382:2006 | Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm |
| BS EN 3364:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 4671:2010 | Aerospace series. Steel FE-PM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1400 MPa |
| BS EN 4659:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. R<sub>m</sub> ≥ 1650 MPa |
| BS EN 3120:2012 | Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems. 4 mm ≤ D ≤ 51 mm. 690 MPa ≤ Rm ≤ 1 030 MPa |
| BS EN 3525:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm ≪ a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa |
| BS EN 4642:2009 | Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa |
| BS EN 4383:2006 | Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock |
| BS EN 3671:2007 | Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm |
| BS EN 4655:2010 | Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa |
| BS EN 3668:2006 | Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm |
| BS EN 4373:2007 | Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ? 75 mm, a ? 3 mm |
| BS EN 4318:2007 | Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ? 100 mm, Rm ? 960 MPa |
| BS EN 3490:2007 | Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa |
| 06/30146155 DC : 0 | EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 200 MM 900 MPA = RM = 1 050 MPA |
| BS EN 2817:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa |
| 10/30239356 DC : 0 | BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| I.S. EN 3120:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64003 - COLD WORKED AND STRESS RELIEVED - SEAMLESS TUBE FOR PRESSURE SYSTEMS - 4 MM <= D <= 51 MM - 690 MPA <= R[M] <= 1030 MPA |
| I.S. EN 4672:2011 | AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2202 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED - SEAMLESS TUBE - D <= 50 MM, A <= 3 MM |
| PREN 2199 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| I.S. EN 2818:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1070 MPA |
| PREN 3160 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 4262 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA |
| PREN 4333 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4902 (X5CRNICOMOWMN21-20-20-3-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4314 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 4569 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - WIRE - D <= 4 MM |
| PREN 4575 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND DESCALED - SHEET AND PLATE - 3 MM < A <= 50 MM |
| PREN 2959 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1302 (NICR20CO13MO4TI3AL) - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS - 3 MM <= D <= 30 MM |
| PREN 3120 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64003 - COLD WORKED AND STRESS RELIEVED - SEAMLESS TUBE FOR PRESSURE SYSTEMS - 4 MM <= D <= 51 MM - 690 MPA <= R[M] <= 1030 MPA |
| XP PREN 3527 : 1996 XP | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 100MM |
| PREN 3364 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2538 : 200P3 | AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA |
| PREN 3162 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA |
| PREN 2485 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - FORGING STOCK |
| PREN 3526 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA |
| I.S. EN 4384:2007 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK |
| PREN 3361 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1 070 MPA <= R[M] <= 1 220 MPA |
| PREN 3357 : 200P2 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 150 MM - 1 200 MPA <= R[M] <= 1 400 MPA |
| PREN 3358 : 200P3 | |
| PREN 3508 : 200P2 | |
| PREN 4671 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| PREN 4657 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| PREN 4264 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - AS FORGED - FORGING STOCK - A OR D <= 200 MM |
| PREN 4324 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-W42201 - FILLER METAL FOR WELDING - ROD |
| PREN 3972 : 200P1 | |
| PREN 4329 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH0001 (NICR20) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4337 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH8901 (NICR16TI3MN2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4332 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1805 (8CRMNMO12-4-9) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4336 : 200P1 | AEROSPACE SERIES - STEEL FE-WA3801 (X4CRNIMN20-10-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4347 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4370 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - NON HEAT TREATED - FORGING STOCK - A OR D <= 100 MM |
| PREN 4378 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRE FOR RIVETS - D <= 1,6 MM |
| PREN 4376 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4382 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM |
| PREN 4461 : 200P1 | |
| PREN 4511 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR22FEMO) - SOLUTION TREATED AND COLD WORKED - WIRE FOR RIVETS - 1,6 MM <= D <= 10 MM |
| PREN 4567 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - BAR AND SECTION - A OR D <= 100 MM |
| PREN 4571 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 4088 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - BAR FOR MACHINING - D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA |
| PREN 4093 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET, STRIP AND PLATE - A > 3 MM |
| I.S. EN 4657:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| I.S. EN 3469:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| I.S. EN 4642:2009 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA |
| I.S. EN 3487:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| BS EN 4628:2013 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa |
| BS EN 3524:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa |
| BS EN 4346:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 3526:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa |
| BS EN 4467:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa |
| I.S. EN 4659:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| I.S. EN 4463:2007 | |
| I.S. EN 4500-004:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| PREN 2184 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 2773 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA |
| PREN 2763 : 200P3 | |
| PREN 2817 : 200P3 | |
| PREN 3018 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NB1AI1) - CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIRE FOR THE MANUFACTURE OF THREAD INSERTS - D <= 3 MM |
| PREN 4346 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4375 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 4335 : 200P1 | AEROSPACE SERIES - STEEL FE-WA2602 (X4NICRTIMOV26-15) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4288 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - FORGING STOCK |
| PREN 4326 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4102 (COCR28W20NI5V1) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4287 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010 - FORGING STOCK |
| PREN 4289 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - FORGING STOCK |
| I.S. EN 4500-003:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| PREN 3459 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM |
| PREN 3523 : 200P2 | |
| PREN 3509 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 40 MM = 1050 MPA <= R[M] <= 1250 MPA |
| PREN 3516 : 200P2 | AEROSPACE SERIES - STEEL FE-PL8201 (41NICRMO2) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3477 : 200P3 | AEROSPACE SERIES - STEEL FE-PM3503 (X7CRNIMO15-7-3) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 15 MM - 1310 MPA <= R[M] <= 1550 MPA |
| PREN 3528 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3359 : 200P2 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3378 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - WIRE FOR RIVET - 1,6 MM <= D <= 10 MM |
| PREN 3668 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 4086 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14B5TI2) - NON HEAT TREATED - FORGING STOCK A OR D <= 360 MM |
| I.S. EN 4500-005:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| I.S. EN 4262:2013 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA |
| I.S. EN 4263:2013 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA |
| I.S. EN 4467:2007 | |
| I.S. EN 3163:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM |
| DIN EN 3018:1997-12 (Draft) | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NBAL1) CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIREFOR THE MANUFACTURE OF THREAD INSERTS D <= 3 MM |
| I.S. EN 3162:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - R[M] >= 930 MPA |
| I.S. EN 4346:2007 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENDED, FORGING STOCK A OR D <= 300 MM |
| I.S. EN 3160:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 1310 MPA |
| BS EN 3532:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated.Plate. 6 mm < a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| EN 2469:2007 | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm ≤ D ≤ 12,5 mm - 450 MPa ≤ Rm ≤ 650 MPa |
| EN 3945:2001 | Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste |
| EN 3897:2001 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding |
| EN 3921:2001 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil |
| EN 3958:2001 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil |
| EN 4347:2007 | Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| UNI EN 4500-005 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| UNI EN 3120 : 2013 | Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa |
| UNI EN 2213 : 2013 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
| UNI EN 4500-004 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| UNI EN 4659 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| UNI EN 4656 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| UNI EN 4671 : 2011 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| UNI EN 4670 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| UNI EN 3459 : 2011 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM |
| UNI EN 4500-003 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| UNI EN 4658 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| UNI EN 4657 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| UNI EN 4655 : 2011 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOAITI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| UNI EN 4628 : 2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| UNI EN 4262 : 2014 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA |
| UNI EN 4382 : 2008 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM |
| UNI EN 4672 : 2012 | AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 3161:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 930 MPA |
| I.S. EN 4655:2010 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| I.S. EN 4671:2010 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| XP PREN 4347 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM |
| XP PREN 4346 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM |
| PREN 4330 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4802 (X8CRNIMN27-22-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4317 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 200 MM |
| PREN 4331 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1804 (25CRMNMO4-2-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4343 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1001 (X13CR12) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4222 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1305 (NICR22CO13MO9AI1) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM |
| PREN 2119 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRES FOR RIVETS - 2 MM <= D <= 10 MM - R[M] >= 960 MPA |
| PREN 4528 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS A <= 3 MM 1250 MPA <= RM <= 1640 MPA |
| PREN 2178 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4371 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - NON HEAT TREATED - BAR FOR RIVETS - D <= 10 MM |
| PREN 4380 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 2915 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 3532 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 40 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3521 : 200P2 | |
| PREN 3553 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T6511 - EXTRUDED BAR AND SECTION A OR D <= 160 MM |
| PREN 3321 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - AS FORGED - GRADE 1 FORGING STOCK, FOR SOLUTION TREATED AND AGED FORGINGS - A OR D <= 360 MM |
| PREN 3476 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= TO 300 MM |
| PREN 4642 : 200P1 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= RM <= 1050 MPA |
| PREN 4207 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P8090 - T89 - EXTRUDED BAR AND SECTION - A OR D <= 15 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4089 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOFTENED - FORGING STOCK - A OR D <= 150 MM |
| DIN EN 2959:2000-03 (Draft) | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1302 (NICR20CO13MO4TI3AL), SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS 3 MM = D = 30 MM |
| I.S. EN 2817:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 1070 MPA |
| I.S. EN 4670:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| I.S. EN 4461:2007 | |
| 06/30146957 DC : 0 | EN 3488 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - AIR MELTED SOFTENED SHEET AND STRIP A = 6 MM 500 = RM = 700 MPA |
| BS EN 3487:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Bar for machining. a or D ≤ 250 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| 10/30239354 DC : 0 | BS EN 4720 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| BS EN 3459:2010 | Aerospace series. Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn). Solution treated and aged. Plate. 6 mm < a ≤ 50 mm |
| BS EN 3528:2013 | Aerospace series. Steel X2NiCoMo18-8-5 (1.6359). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| BS EN 4263:2013 | Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa |
| BS EN 3971:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Annealed. Forging stock. a or D ≤ 350 mm |
| BS EN 4468:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 4314:2007 | Aerospace series. Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15). Non heat treated, forging stock a or D ? 250 mm |
| BS EN 4461:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa |
| BS EN 3523:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De ≤ 100 mm. 1080 MPa ≤ Rm ≤ 1280 MPa |
| BS EN 3469:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| 12/30263296 DC : 0 | BS EN 2278 - AEROSPACE SERIES - STEEL FE-PM1502 (Z12CNDV12) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM |
| BS EN 3365:2007 | Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D ≤ 300 mm |
| BS EN 3359:2007 | Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 3161:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
| BS EN 4347:2007 | Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 4500-003:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for heat resisting alloys |
| BS EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220 MPa |
| 06/30146677 DC : 0 | EN 3487 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) AIR MELTED SOFTENED BAR FOR MACHINING A OR D - 250 MM 500 - RM - 700 MPA |
| 09/30204515 DC : DRAFT MAY 2009 | BS EN 3528 - AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - D[E] <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| BS EN 3531:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| 10/30239371 DC : 0 | BS EN 4293 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175- AL ZN5,5MGCU(B) - T73511 - EXTRUDED BAR AND SECTION A OR D <= 150 MM |
| BS EN 4500-005:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for steels |
| BS EN 4463:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| BS EN 4292:2005 | Aerospace series. Aluminium alloy AL-R39002. Forging stock |
| BS EN 2213:2012 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De ≤ 16 mm. 980 MPa ≤ Rm ≤ 1 180 MPa |
| BS EN 3163:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, softened, forging stock a or D ≤ 300 mm |
| BS EN 4658:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. R<sub>m</sub> ≥ 1520 MPa |
| BS EN 3361:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa |
| BS EN 3160:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa |
| BS EN 4656:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1520 MPa |
| BS EN 2947:2006 | Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm |
| BS EN 4670:2010 | Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm |
| BS EN 3162:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| BS EN 2821:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| BS EN 4500-004:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys |
| 06/30146391 DC : 0 | EN 2467 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - AIR MELTED SOFTENED PLATE SHEET AND STRIP 0,4 = A = 20 MM 520 = RM = 670 MPA |
| EN 4500-005:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels |
| EN 3926:2001 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil |
| EN 3524:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3487:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| EN 3526:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa |
| EN 3925:2001 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil |
| EN 4324:2001 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod |
| EN 3923:2001 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste |
| EN 4329:2001 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod |
| EN 2821:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 2818:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
| EN 3531:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 3932:2001 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil |
| EN 4659:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 MPa |
| EN 3936:2001 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste |
| EN 3943:2001 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste |
| EN 4335:2002 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod |
| EN 4655:2010 | Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 400 MPa |
| EN 3956:2001 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire |
| EN 3892:2001 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding |
| EN 4384:2007 | Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock |
| EN 4340:2002 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod |
| EN 3935:2001 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil |
| EN 3954:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste |
| EN 4344:2001 | Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod |
| EN 3896:2001 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding |
| EN 4315:2007 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa |
| EN 4658:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa |
| EN 3893:2001 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding |
| EN 3930:2001 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste |
| EN 3359:2007 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| EN 3469:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 4333:2002 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod |
| EN 4338:2001 | Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod |
| EN 3163:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, softened, forging stock a or D ≤ 300 mm |
| EN 3120:2012 | Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa |
| EN 3887:2001 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| EN 4642:2009 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
| EN 3476:2006 | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 4382:2006 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm |
| EN 4325:2001 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod |
| EN 4317:2007 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 200 mm |
| EN 3885:2001 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding |
| EN 4341:2001 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod |
| EN 3938:2001 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil |
| EN 3525:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3532:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 3964:2001 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire |
| EN 4469:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 3890:2001 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
| EN 4462:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 4343:2002 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod |
| EN 3927:2001 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste |
| EN 3361:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 4383:2006 | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock |
| EN 3937:2001 | Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste |
| EN 3941:2001 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil |
| EN 4331:2002 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod |
| EN 3895:2001 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding |
| EN 4328:2002 | Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod |
| EN 4342:2001 | Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
| EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 3528:2013 | Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 3364:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| EN 4670:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 4500-004:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys |
| EN 3668:2006 | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm |
| EN 4263:2013 | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa |
| EN 3888:2001 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 4250:2001 | Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil |
| EN 3920:2001 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste |
| EN 4463:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 4500-003:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys |
| EN 4334:2002 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod |
| EN 3490:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa |
| EN 3894:2001 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding |
| EN 3957:2001 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste |
| EN 4327:2001 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod |
| EN 3160:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa |
| EN 3933:2001 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste |
| EN 4467:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 3959:2001 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste |
| EN 4336:2002 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod |
| EN 3671:2007 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm |
| EN 3969:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm |
| EN 3889:2001 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
| EN 3161:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
| EN 2213:2012 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa |
| EN 4628:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa |
| EN 3939:2001 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste |
| EN 3955:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil |
| EN 3934:2001 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil |
| EN 4339:2001 | Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod |
| EN 4314:2007 | Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 250 mm |
| EN 3523:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 4657:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 650 MPa |
| EN 4103:2001 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil |
| EN 4461:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 4468:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 2815:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa |
| EN 3638:2007 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm |
| EN 3365:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D ≤ 300 mm |
| EN 3972:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| EN 3961:2001 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil |
| EN 3962:2001 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire |
| EN 4332:2002 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod |
| EN 3527:2007 | Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 4104:2001 | Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste |
| EN 4337:2001 | Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod |
| EN 4373:2007 | Aerospace series - Heat resisting alloy NI-PD9001 (NiCu31) - Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm |
| EN 4672:2011 | Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 3971:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm |
| EN 2947:2006 | Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D ≤ 2,3 mm |
| EN 4671:2010 | Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa |
| EN 4656:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa |
| EN 3816:2006 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa |
| EN 4330:2002 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod |
| EN 4318:2007 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa |
| EN 3162:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| EN 3952:2001 | Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire |
| EN 4292:2005 | Aerospace series - Aluminium alloy AL-R39002 - Forging stock |
| EN 3459:2010 | Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm |
| EN 3963:2001 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil |
| EN 3946:2001 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste |
| EN 4326:2001 | Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod |
| EN 3953:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire |
| EN 4262:2013 | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa |
| EN 3942:2001 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil |
| EN 2817:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
| EN 3886:2001 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding |
| EN 4085:2001 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil |
| EN 4346:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm |
| I.S. EN 3365:2007 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2407 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| I.S. EN 3364:2007 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK A OR D <= 300 MM |
| PREN 4628 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| PREN 2469 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3901 (X1CRNI18-10) - AIR MELTED - SOFTENED - WIRES - 0,4 <= D <= 12,5 MM - 450 MPA <= R[M] <= 650 MPA |
| PREN 3161 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA |
| PREN 2663 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2813 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T6 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 12,5 MM |
| PREN 2213 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
| PREN 2185 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2540 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 2662 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - ANNEALED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 3163 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2821 : 200P2 | |
| PREN 3510 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 4500-005 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| PREN 3527 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3679 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - PLATE - 6 MM < A <= 15 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 4374 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4384 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK |
| PREN 4468 : 200P1 | |
| PREN 2175 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM - R[M] >= 850 MPA |
| PREN 4381 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR STRUCTURAL APPLICATION - D <= 50 MM, A <= 3 MM |
| PREN 4672 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4655 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| PREN 4339 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4001 (COCR29W9) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4572 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM |
| PREN 4315 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - A OR D <= 100 MM - R[M] >= 900 MPA |
| PREN 4327 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1401 (COCR26NI11W8) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4342 : 200P1 | AEROSPACE SERIES - TITANIUM TI-W99001 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 3974 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH8001 (NICR20TI) - ANNEALED - SEAMLESS DRAWN CAPILLARY TUBE - 0,6 MM <= D <= 2,0 MM |
| PREN 3991 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4368 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CD1701 (NICO15CR10AL6TI5MO3) - NON HEAT TREATED - REMELTING STOCK |
| PREN 4670 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3989 : 200P1 | |
| PREN 4092 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM |
| PREN 3971 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4096 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10210CR9A16TA3) - VACUUM MELTED - NON HEAT TREATED - REMELTING STOCK |
| PREN 3511 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - BAR FOR THE MANUFACTURE OF MACHINED BEARINGS - A OR D <= 130 MM |
| PREN 3557 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T4 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 3,0 MM |
| PREN 3990 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - BAR FOR MACHINING - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| PREN 4500-003 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS |
| I.S. EN 4656:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| I.S. EN 4628:2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 3459:2010 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM |
| I.S. EN 4462:2007 | |
| I.S. EN 4468:2007 | |
| I.S. EN 4658:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| I.S. EN 2815:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 965 MPA |
| I.S. EN 4469:2007 | |
| BS EN 4262:2013 | Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa |
| BS EN 3969:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm |
| BS EN 4672:2011 | Aerospace series. Steel FE-PM1504 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm |
| 12/30263035 DC : 0 | BS EN 4825 - AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - AIR MELTED AND CONSUMABLE ELECTRODE REMELTED - HARDENED AND TEMPERED - BAR - D[E] <= 150 MM - 900 MPA <= R[M] <= 1100 MPA |
| BS EN 4469:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| 06/30146136 DC : 0 | EN 2573 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - RM - 780 MPA 0,25 - DE - 3 MM |
| BS EN 3638:2007 | Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm ≤ a ≤ 10 mm |
| BS EN 3527:2007 | Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D ≤ 300 mm |
| 06/30146146 DC : 0 | EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 150 MM 1 100 MPA = RM = 1 300 MPA |
| BS EN 3476:2006 | Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| BS EN 4462:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 2815:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 965 MPa |
| BS EN 4384:2007 | Aerospace series. Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al). Non heat treated. Remelting stock |
| BS EN 4657:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1650 MPa |
| BS EN 2469:2007 | Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa |
| BS EN 4315:2007 | Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section a or D ? 100 mm, Rm ? 900 MPa |
| BS EN 3972:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De ≤ 50 mm. 1250 MPa ≤ Rm ≤ 1400 MPa |
| 10/30239355 DC : 0 | BS EN 4721 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR)-HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
| BS EN 3816:2006 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa |
| BS EN 2818:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa |
| BS EN 4317:2007 | Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Non heat treated, forging stock a or D ? 200 mm |
| TR 3040-2 : 7 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - LIST OF QUALIFIED PRODUCTS |
| PREN 4258 : 1995 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN 3042 : 1991 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.