PREN 16510-1 : DRAFT 2013
Current
Current
The latest, up-to-date edition.
RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
Published date
24-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of appliances and system boundary
for roomsealed appliances
5 Materials, design and construction
6 Safety requirements
7 Performance requirements
8 Appliance instructions
9 Assessment and verification of constancy of
performance - AVCP
10 Marking
Annex A (normative) - Test methods
Annex B (normative) - Test fuels and recommended
fuels
Annex C (informative) - Installation for roomsealed
appliances
Annex D (informative) - Arrangement for measuring the
leakage rate
Annex E (normative) - Measuring procedure for nitrogen
oxides (NO[x])
Annex F (normative) - Measuring procedure for organic
gaseous carbon (OGC)
Annex G (normative) - Measuring procedure for particulate
matter (PM)
Annex H (informative) - Guideline for the characteristics to
be taken into account in order to decide on
families of appliances
Bibliography
Defines requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of roomheaters fired by solid fuel (hereafter referred to as "appliance(s)") and gives instructions for them.
| Committee |
TC 295
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 16510-1 : DRAFT 2013 | Identical |
| 13/30271701 DC : DRAFT JAN 2013 | Identical |
| 13/30271701 DC : 0 | Identical |
| DIN EN 16510-1:2018-11 | Identical |
| NEN EN 16510-1:2018 | Identical |
| DIN EN 16510-1:2013-02 (Draft) | Identical |
| I.S. EN 15316-4-8:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-8: SPACE HEATING GENERATION SYSTEMS, AIR HEATING AND OVERHEAD RADIANT HEATING SYSTEMS, INCLUDING STOVES (LOCAL), MODULE M3-8-8 |
| BS EN 15316-4-8:2017 | Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8 |
| 13/30271695 DC : 0 | BS EN 16510-2-2 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-2: INSET APPLIANCES INCLUDING OPEN FIRES |
| DIN EN 15316-4-8:2011-05 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-8: SPACE HEATING GENERATION SYSTEMS, AIR HEATING AND OVERHEAD RADIANT HEATING SYSTEMS, INCLUDING STOVES (LOCAL), MODULE M3-8-8 |
| 13/30271704 DC : 0 | BS EN 16510-2-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-1: ROOMHEATERS |
| 13/30271692 DC : 0 | BS EN 16510-2-3 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-3: COOKERS |
| 13/30271698 DC : 0 | BS EN 16510-2-4 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-4: INDEPENDENT BOILERS - NOMINAL HEAT OUTPUT UP TO 50 KW |
| EN 15316-4-8:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8 |
| EN 14989-2:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN ISO 228-2:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
| CEN/TS 15883:2009 | Residential solid fuel burning appliances - Emission test methods |
| EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| ISO 334:2013 | Solid mineral fuels Determination of total sulfur Eschka method |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| CEN/TS 14793:2005 | Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
| EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 13526:2001 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 331:1983 | Coal Determination of moisture in the analysis sample Direct gravimetric method |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| ISO 687:2010 | Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
| ISO 501:2012 | Hard coal — Determination of the crucible swelling number |
| ISO 10849:1996 | Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| ISO 1171:2010 | Solid mineral fuels — Determination of ash |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 562:2010 | Hard coal and coke — Determination of volatile matter |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.