PD ISO/TS 21609:2014
Current
Current
The latest, up-to-date edition.
Road vehicles. (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-09-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and
abbreviated terms
4 General
5 Installation
6 Test and final inspection
Bibliography
Provides requirements and recommendations for the installation in road vehicles of: - radio frequency (RF) transmitting and receiving equipment, - 'in-road-vehicle' mounting kits for transportable and hand-held RF equipment, and - ancillary equipment associated with these.
| Committee |
AUE/16
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Specification gives requirements and recommendations for the installation in road vehicles of
radio frequency (RF) transmitting and receiving equipment,
“in-road-vehicle” mounting kits for transportable and hand-held RF equipment, and
ancillary equipment associated with these.
As well as methods for installation, it establishes methods for minimizing the possibility of electromagnetic interference (EMI) between the installed equipment and the vehicle electrical and electronic systems.
| Standards | Relationship |
| ISO/TS 21609:2014 | Identical |
| EN 301 489-33 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 33: SPECIFIC CONDITIONS FOR ULTRA-WIDEBAND (UWB) DEVICES; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
| EN 301 489-24 : 1.5.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 24: SPECIFIC CONDITIONS FOR IMT-2000 CDMA DIRECT SPREAD (UTRA AND E-UTRA) FOR MOBILE AND PORTABLE (UE) RADIO AND ANCILLARY EQUIPMENT |
| EN 301 489-16 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 16: SPECIFIC CONDITIONS FOR ANALOGUE CELLULAR RADIO COMMUNICATIONS EQUIPMENT, MOBILE AND PORTABLE |
| EN 301 489-13 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 13: SPECIFIC CONDITIONS FOR CITIZENS' BAND (CB) RADIO AND ANCILLARY EQUIPMENT (SPEECH AND NON-SPEECH) |
| EN 301 489-31 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 31: SPECIFIC CONDITIONS FOR EQUIPMENT IN THE 9 KHZ TO 315 KHZ BAND FOR ULTRA LOW POWER ACTIVE MEDICAL IMPLANTS (ULP-AMI) AND RELATED PERIPHERAL DEVICES (ULP-AMI-P); HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU |
| EN 301 489-15 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 15: SPECIFIC CONDITIONS FOR COMMERCIALLY AVAILABLE AMATEUR RADIO EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU |
| EN 301 489-11 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 11: SPECIFIC CONDITIONS FOR TERRESTRIAL SOUND BROADCASTING SERVICE TRANSMITTERS |
| EN 301 489-26 : 2.3.2 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 26: SPECIFIC CONDITIONS FOR CDMA 1X SPREAD SPECTRUM BASE STATIONS, REPEATERS AND ANCILLARY EQUIPMENT |
| EN 301 489-22 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 22: SPECIFIC CONDITIONS FOR GROUND BASED VHF AERONAUTICAL MOBILE AND FIXED RADIO EQUIPMENT |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| EN 301 489-20 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 20: SPECIFIC CONDITIONS FOR MOBILE EARTH STATIONS (MES) USED IN THE MOBILE SATELLITE SERVICES (MSS) |
| EN 301 489-28 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 28: SPECIFIC CONDITIONS FOR WIRELESS DIGITAL VIDEO LINKS |
| EN 301 489-19 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 19: SPECIFIC CONDITIONS FOR RECEIVE ONLY MOBILE EARTH STATIONS (ROMES) OPERATING IN THE 1,5 GHZ BAND PROVIDING DATA COMMUNICATIONS |
| EN 301 489-32 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 32: SPECIFIC CONDITIONS FOR GROUND AND WALL PROBING RADAR APPLICATIONS |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| EN 301 489-3 : 1.6.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 3: SPECIFIC CONDITIONS FOR SHORT-RANGE DEVICES (SRD) OPERATING ON FREQUENCIES BETWEEN 9 KHZ AND 246 GHZ |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| EN 301 489-23 : 1.5.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 23: SPECIFIC CONDITIONS FOR IMT-2000 CDMA, DIRECT SPREAD (UTRA AND E-UTRA) BASE STATION (BS) RADIO, REPEATER AND ANCILLARY EQUIPMENT |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| EN 301 489-7 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 7: SPECIFIC CONDITIONS FOR MOBILE AND PORTABLE RADIO AND ANCILLARY EQUIPMENT OF DIGITAL CELLULAR RADIO TELECOMMUNICATIONS SYSTEMS (GSM AND DCS) |
| EN 301 489-12 : 2.2.2 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 12: SPECIFIC CONDITIONS FOR VERY SMALL APERTURE TERMINAL, SATELLITE INTERACTIVE EARTH STATIONS OPERATED IN THE FREQUENCY RANGES BETWEEN 4 GHZ AND 30 GHZ IN THE FIXED SATELLITE SERVICE (FSS) |
| EN 301 489-27 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 27: SPECIFIC CONDITIONS FOR ULTRA LOW POWER ACTIVE MEDICAL IMPLANTS (ULP-AMI) AND RELATED PERIPHERAL DEVICES (ULP-AMI-P); HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| EN 301 489-18 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 18: SPECIFIC REQUIREMENTS FOR TERRESTRIAL TRUNKED RADIO (TETRA) EQUIPMENT |
| EN 301 489-17 : 2.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| EN 301 489-2 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 2: SPECIFIC CONDITIONS FOR RADIO PAGING EQUIPMENT |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| EN 301 489-29 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 29: SPECIFIC CONDITIONS FOR MEDICAL DATA SERVICE DEVICES (MEDS) OPERATING IN THE 401 MHZ TO 402 MHZ AND 405 MHZ TO 406 MHZ BANDS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| EN 301 489-10 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 10: SPECIFIC CONDITIONS FOR FIRST (CT1 AND CT1+) AND SECOND GENERATION CORDLESS TELEPHONE (CT2) EQUIPMENT |
| EN 301 489-6 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 6: SPECIFIC CONDITIONS FOR DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU |
| 119999/5/EC : 1999 | DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY |
| EN 301 489-14 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 14: SPECIFIC CONDITIONS FOR ANALOGUE AND DIGITAL TERRESTRIAL TV BROADCASTING SERVICE TRANSMITTERS |
| EN 301 489-4 : 2.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 4: SPECIFIC CONDITIONS FOR FIXED RADIO LINKS AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| EN 301 489-8 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 8: SPECIFIC REQUIREMENTS FOR GSM BASE STATIONS |
| EN 301 489-34 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 34: SPECIFIC CONDITIONS FOR EXTERNAL POWER SUPPLY (EPS) FOR MOBILE PHONES |
| EN 301 489-5 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 5: SPECIFIC CONDITIONS FOR PRIVATE LAND MOBILE RADIO (PMR) AND ANCILLARY EQUIPMENT (SPEECH AND NON-SPEECH) AND TERRESTRIAL TRUNKED RADIO (TETRA) HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU |
| EN 301 489-9 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 9: SPECIFIC CONDITIONS FOR WIRELESS MICROPHONES, SIMILAR RADIO FREQUENCY (RF) AUDIO LINK EQUIPMENT, CORDLESS AUDIO AND IN-EAR MONITORING DEVICES |
| EN 301 489-25 : 2.3.2 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 25: SPECIFIC CONDITIONS FOR CDMA 1X SPREAD SPECTRUM MOBILE STATIONS AND ANCILLARY EQUIPMENT |
| EN 301 489-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.