PD ISO/TR 19961:2010
Current
The latest, up-to-date edition.
Cranes. Safety code on mobile cranes
Hardcopy , PDF
English
31-07-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Purpose
3 Terms and definitions
4 Construction and characteristics
5 Inspection/maintenance
6 Testing
7 Operation - Qualifications/practices for job-site
personnel
Bibliography
Specifies a guide to International Standards applicable to mobile cranes (crawler cranes, railway cranes, wheel-mounted cranes and any variations thereof that retain the same fundamental characteristics) and a summary of related provisions.
| Committee |
MHE/3/5
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report provides a guide to International Standards applicable to mobile cranes (crawler cranes, railway cranes, wheel-mounted cranes and any variations thereof that retain the same fundamental characteristics) and a summary of related provisions. Special adaptations of the general types of machine covered, where applicable, also fall within its scope.
NOTE According to the ISO Directives, Part2, the verbal forms used to identify provisions in an International Standard are
-
“shall” or “shall not”, used to indicate requirements strictly to be followed in order to conform to the document and from which no deviation is permitted,
-
“should” or “should not” for recommendations, indicating that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course of action is deprecated but not prohibited, and
-
“may” or “need not”, used to indicate a course of action permissible within the limits of the document.
| Standards | Relationship |
| ISO/TR 19961:2010 | Identical |
| ISO 23814:2009 | Cranes — Competency requirements for crane inspectors |
| ISO 9373:1989 | Cranes and related equipment Accuracy requirements for measuring parameters during testing |
| ISO 4308-1:2003 | Cranes and lifting appliances Selection of wire ropes Part 1: General |
| ISO 7363:1986 | Cranes and lifting appliances — Technical characteristics and acceptance documents |
| ISO 11660-2:2015 | Cranes Access, guards and restraints Part 2: Mobile cranes |
| ISO 4302:2016 | Cranes — Wind load assessment |
| ISO 11660-1:2008 | Cranes — Access, guards and restraints — Part 1: General |
| ISO 10245-2:2014 | Cranes — Limiting and indicating devices — Part 2: Mobile cranes |
| ISO 15513:2000 | Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| ISO 12480-1:1997 | Cranes — Safe use — Part 1: General |
| ISO 9926-1:1990 | Cranes — Training of drivers — Part 1: General |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO 9928-2:2014 | Cranes Crane operating manual Part 2: Mobile cranes |
| ISO 4310:2009 | Cranes — Test code and procedures |
| ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
| ISO 8566-2:2016 | Cranes — Cabins and control stations — Part 2: Mobile cranes |
| ISO 10972-2:2009 | Cranes Requirements for mechanisms Part 2: Mobile cranes |
| ISO 12478-1:1997 | Cranes — Maintenance manual — Part 1: General |
| ISO 13200:1995 | Cranes — Safety signs and hazard pictorials — General principles |
| ISO 4308-2:1988 | Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization |
| ISO 11662-1:1995 | Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii |
| ISO 8566-1:2010 | Cranes Cabins and control stations Part 1: General |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 9927-1:2013 | Cranes — Inspections — Part 1: General |
| ISO 9374-1:1989 | Cranes — Information to be provided — Part 1: General |
| ISO 14518:2005 | Cranes — Requirements for test loads |
| ISO 7752-2:2011 | Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes |
| ISO 10973:1995 | Cranes — Spare parts manual |
| ISO 4301-2:2009 | Cranes Classification Part 2: Mobile cranes |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| ISO 8087:1985 | Mobile cranes Drum and sheave sizes |
| ISO/TS 15696:2000 | Cranes List of equivalent terms |
| ISO 7296-2:1996 | Cranes Graphical symbols Part 2: Mobile cranes |
| ISO 23815-1:2007 | Cranes Maintenance Part 1: General |
| ISO 23853:2004 | Cranes Training of slingers and signallers |
| ISO 11629:2004 | Cranes Measurement of the mass of a crane and its components |
| ISO 8686-2:2004 | Cranes Design principles for loads and load combinations Part 2: Mobile cranes |
| ISO 7752-1:2010 | Cranes Control layout and characteristics Part 1: General principles |
| ISO 13202:2003 | Cranes Measurement of velocity and time parameters |
| ISO 10245-1:2008 | Cranes Limiting and indicating devices Part 1: General |
| ISO 23813:2007 | Cranes Training of appointed persons |
| ISO 11994:1997 | Cranes Availability Vocabulary |
| ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
| ISO 10972-1:1998 | Cranes — Requirements for mechanisms — Part 1: General |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| ISO 4306-2:1994 | Cranes — Vocabulary — Part 2: Mobile cranes |
| ISO 9942-1:2015 | Cranes Information labels Part 1: General |
| ISO 2374:1983 | Lifting appliances Range of maximum capacities for basic models |
| ISO 11661:1998 | Mobile cranes Presentation of rated capacity charts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.