PD CEN/TR 15339-6:2014
Current
The latest, up-to-date edition.
Thermal spraying. Safety requirements for thermal spraying equipment Spray booth, Handling system, Dust collection, Exhaust system, Filter
Hardcopy , PDF
English
30-06-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Function of thermal spraying
equipment for thermal spraying
4 Potential hazards
5 Safety requirements - protection measures
6 Requirements for manufacture, supply,
operation,and maintenance
7 National rules
Bibliography
Describes safety requirements of machines and equipment for thermal spraying, in this case of spray booths, handling, dust collection, exhaust, and filter systems.
| Committee |
STI/40
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report specifies safety requirements of machines and equipment for thermal spraying, in this case of spray booths, handling, dust collection, exhaust, and filter systems.
This Technical Report should be used in conjunction with the Technical Report CEN/TR 15339-1 which deals with general aspects for design, manufacture, and/or put into service of machines or equipment and with the responsibility to issue the CE Conformity Declaration.
| Standards | Relationship |
| CEN/TR 15339-6:2014 | Identical |
| EN ISO 15667:2000 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 10218-2:2011 | Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration |
| CEN/TR 15339-5:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units |
| ISO 15012-1:2013 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency |
| CEN/TR 15339-4:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply |
| CEN/TR 15339-1:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements |
| ISO 15012-2:2008 | Health and safety in welding and allied processes Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
| EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
| EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| EN 1395-7:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
| EN ISO 10218-1:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 50281-2-1 : 98 COR 99 | Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 657:2005 | Thermal spraying - Terminology, classification |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 60974-10:2014/A1:2015 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN ISO 15012-2:2008 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008) |
| EN 14799:2007 | Air filters for general air cleaning - Terminology |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.