PD CEN/TR 10261:2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Iron and steel. European standards for the determination of chemical composition
Hardcopy , PDF
26-10-2018
English
30-04-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Terms and definitions
3 European Standards available for the determination of
the chemical composition of steel and iron
4 Range of application and principle of the methods
Annex A (informative) - List of other European Standards
and CEN Technical Reports applicable for the
determination of the chemical composition of
steels and irons
Annex B (informative) - List of withdrawn Euronorms and
of the corresponding replacement European
standards
Annex C (informative) - Graphical representation of the scope
for methods available in this technical report
Annex D (informative) - Trilingual key of the abbreviations
used in the Figures given in Annex C
Describes, the European Standards, which are currently available for the determination of the chemical composition of steel and iron.
| Committee |
ISE/1
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy |
This Technical Report lists, under Clause 3, the European Standards, which are currently available for the determination of the chemical composition of steel and iron. In Clause 4, it provides details of the range of application and gives the principle of the method for each standard. Items which are under preparation as European Standards or as CEN Technical Reports by ECISS/TC 102 are available on the webpage of CEN, through the link http://www.cen.eu/cen/Sectors/TechnicalCommitteesWorkshops/CENTechnicalCommittees/Pages/WP.aspx?param=733643&title=ECISS/TC%20102. Annex A contains a list of other European Standards and CEN Technical Reports applicable for the determination of the chemical composition of steels and irons. Annex B contains a list of withdrawn Euronorms, together with the corresponding replacement European Standards, if any. Annex C gives graphical representations of the concentration ranges of the methods available in this Technical Report. Figure C.1 gives the concentration ranges of the referee methods, Figure C.2 gives the concentration ranges of the routine methods and Figure C.3 represents the fields of application of all the methods available. Annex D provides a trilingual key of the abbreviations used in the Figures given in Annex C.
| Standards | Relationship |
| CEN/TR 10261:2013 | Identical |
| ISO 4945:1977 | Steel Determination of nitrogen content Spectrophotometric method |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| ISO 4947:1986 | Steel and cast iron Determination of vanadium content Potentiometric titration method |
| EN 24159:1989/AC1:1989 | Ferromanganese and ferrosilicomanganese - Determination of manganese content - Potentiometric method (ISO 4159:1978, ed. 1) |
| ISO 4946:2016 | Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method |
| EN ISO 15350:2010 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| EN 24947:1991 | Steel and cast iron - Determination of vanadium content - Potentiometric titration method (ISO 4947:1986) |
| CEN/TR 10354:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry |
| EN 10280:2001+A1:2007 | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| ISO 4829-1:1986 | Steel and cast iron Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 and 1,0 % |
| EN 10276-2:2003 | Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas |
| EN 10071:2012 | Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method |
| EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| EN 10177:1989 | Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method |
| EN ISO 10720:2007 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| EN ISO 10714:2002 | Steel and iron - Determination of phophorus content - Phosphovanadomolybdate spectrophotometric method (ISO 10714:1992) |
| EN 10276-1:2000 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination |
| EN 10036:1989 | Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen |
| EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| ISO 4159:1978 | Ferromanganese and ferrosilicomanganese — Determination of manganese content — Potentiometric method |
| ISO 4937:1986 | Steel and iron — Determination of chromium content — Potentiometric or visual titration method |
| ISO 4943:1985 | Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method |
| EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| EN ISO 10700:1995 | Steel and iron - Determination of manganese content - Flame atomic spectrometric method (ISO 10700:1994) |
| EN ISO 15349-2:2003 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
| CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| CR 10322:2003 | Chemical analysis of ferrous materials - Operational guidelines for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron and steel |
| EN 29658:1991 | Steel - Determination of aluminium content - Flame atomic absorption spectrometric method (ISO 9658:1990) |
| EN 10181:1989 | Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method |
| ISO 10280:1991 | Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method |
| ISO 4938:2016 | Steel and iron Determination of nickel content Gravimetric or titrimetric method |
| ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
| CEN/TR 10353:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
| EN ISO 10280 : 1995 | STEEL AND IRON - DETERMINATION OF TITANIUM CONTENT - DIANTIPYRYLMETHANE SPECTROPHOTOMETRIC METHOD |
| CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| ISO 9658:1990 | Steel — Determination of aluminium content — Flame atomic absorption spectrometric method |
| ISO 10700:1994 | Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method |
| EN 10211:2013 | Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| CR 10321:2003 | Chemical analysis of ferrous materials - Recommendations for the drafting of standard methods of analysis employing flame atomic absorption spectrometry for the chemical analysis of iron and steel |
| EN 10188:1989 | Chemical analysis of ferrous materials - Determination of chromium in steels and irons - Flame atomic absorption spectrometric method |
| EN 10136:1989 | Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| EN 24935:1991 | Steel and iron - Determination of sulphur content - Infrared absorption method after combustion in an induction furnace (ISO 4935:1989) |
| ISO 4829-2:2016 | Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % |
| EN ISO 439:2010 | Steel and iron - Determination of total silicon content - Gravimetric method (ISO 439:1994) |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| CEN/TR 10350:2013 | Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials |
| EN ISO 13900:2002 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| CR 10320:2004 | Optical emission analysis of low alloy steels (routine method) - Method for determination of C, Si, S, P, Mn, Cr, Ni and Cu |
| CR 10299 : 1998 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EN 10178:1989 | Chemical analysis of ferrous materials - Determination of niobium in steels - Spectrophotometric method |
| ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| EN 10184:2006 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| EN 10200:2012 | Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method |
| CR 10316:2001 | Optical emission analysis of low alloy steels (routine method) - Guidelines for the preparation of standard routine method for optical emission spectrometry |
| EN 10212:1995 | Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method |
| EN 10179:1989 | Chemical analysis of ferrous materials - Determination of nitrogen (trace mounts) in steel - Spectrophotometric method |
| EN ISO 9556:2001 | Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989) |
| EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.