ONORM EN 10088-3 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
10-06-2024
12-01-2013
ÖNORM EN 10088-3 enthält die technischen Lieferbedingungen für Halbzeug, warm oder kalt umgeformte Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus Standardgüten und Sondergüten korrosionsbeständiger nichtrostender Stähle für allgemeine Verwendung, wobei allgemeine Verwendung die Verwendung von nichtrostenden Stählen in Berührung mit Lebensmitteln einschliesst. Zusätzlich zu den Angaben dieser Norm gelten, sofern in dieser Norm nichts anderes festgelegt ist, die in ÖNORM EN 10021 festgelegten allgemeinen technischen Lieferbedingungen. ÖNORM EN 10088-3 gilt nicht für die durch Weiterverarbeitung der oben genannten Erzeugnisformen hergestellten Teile mit fertigungsbedingt abweichenden Gütemerkmalen.
| Committee |
TC 021
|
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 10088-3:2014 | Identical |
| NBN EN 10088-3 : 2014 | Identical |
| SN EN 10088-3 : 2014 | Identical |
| I.S. EN 10088-3:2014 | Identical |
| UNI EN 10088-3 : 2014 | Identical |
| NS EN 10088-3 : 2014 | Identical |
| NEN EN 10088-3 : 2014 | Identical |
| UNE-EN 10088-3:2015 | Identical |
| BS EN 10088-3:2014 | Identical |
| NF EN 10088-3 : 2014 | Identical |
| DIN EN 10088-3:2014-12 | Identical |
| ONORM EN 13765 : 2015 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| ONORM F 3032 : 2014 | COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - FIRE BRIGADE KEY BOX - REQUIREMENTS AND TEST SPECIFICATIONS |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ONORM M 7387-3 : 2015 | CENTRAL GAS DISTRIBUTION PLANTS - PART 3: PIPELINES BETWEEN GAS DISTRIBUTION PLANTS AND CONSUMPTION CONNEXIONS |
| ONORM EN 13766 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| ONORM EN 15001-1 : 2011 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ONORM EN ISO 6892-1 : 2017 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| ONORM EN ISO 6892-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ONORM EN ISO 286-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010 + COR 1:2013) |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ONORM EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.