OIML R 76-1 : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
12-01-2013
17-08-2021
Foreword
T Terminology
1 Scope
2 Principles of the Recommendation
3 Metrological requirements
4 Technical requirements for a self- or
semi-self-indicating instrument
5 Technical requirements for electronic instruments
6 Technical requirements for non-self-indicating
instruments
7 Marking of instruments and modules
8 Metrological controls
Annex A - Testing procedures for non-automatic weighing
instruments
Annex B - Additional tests for electronic instruments
Annex C - Testing and certification of indicators and
analog data processing devices as modules of
non-automatic weighing instruments
Annex D - Testing and certification of digital data
processing devices, terminals and digital
displays as modules of non-automatic weighing
instruments
Annex E - Testing and certification of weighing modules
as modules of non-automatic weighing instruments
Annex F - Compatibility checking of modules of non-automatic
weighing instruments
Annex G - Additional examinations and tests for
software-controlled digital devices and instruments
Bibliography
Describes weighbridges and groups of associated non-automatic axle (or wheel) load weighers that determine simultaneously the total mass of a road vehicle with all axles (or wheels) being simultaneously supported by appropriate parts of a load receptor.
| Committee |
TC 9/SC 1
|
| DocumentType |
Standard
|
| PublisherName |
Organisation Internationale de Metrologie Legale
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| GOST OIML R 76-1 : 2011 ERRATA 2014 | Identical |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| ISO 16532-3:2010 | Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
| 09/30173892 DC : 0 | BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| OIML R 59-1 : 2016 | MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| BS ISO 16532-3:2010 | Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
| OIML R 50-1 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 08/30177568 DC : DRAFT FEB 2008 | BS EN 15761 - PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY |
| I.S. EN 932-5:2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION |
| NF EN ISO 8655-6 : 2003 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
| I.S. EN ISO 8655-1:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| ECA 10-18 : 2015 | GUIDELINES ON THE CALIBRATION OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 15761:2010-04 | Pre-shaped growing media - Determination of length, width, height, volume and bulk density |
| I.S. EN 15761:2009 | PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY |
| DIN EN 932-5:2012-05 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| I.S. EN ISO 8655-6:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
| OIML D 16 : 2011 | PRINCIPLES OF ASSURANCE OF METROLOGICAL CONTROL |
| 09/30205556 DC : 0 | BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| BS EN 15761:2009 | Pre-shaped growing media. Determination of length, width, height, volume and bulk density |
| OIML R 50-2 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES |
| BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
| BS EN ISO 8655-1:2002 | Piston-operated volumetric apparatus Terminology, general requirements and user recommendations |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations |
| EN 15761:2009 | Pre-shaped growing media - Determination of length, width, height, volume and bulk density |
| OIML D 26 : 2010 | GLASS DELIVERY MEASURES - AUTOMATIC PIPETTES |
| BS EN ISO 8655-6:2002 | Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error |
| ISO 8655-6:2002 | Piston-operated volumetric apparatus — Part 6: Gravimetric methods for the determination of measurement error |
| UNE-EN 15761:2010 | Pre-shaped growing media - Determination of length, width, height, volume and bulk density |
| UNE-ISO 16532-3:2017 | Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNE-EN 932-5:2012 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| IEC 61000-4-1:2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| IEC 60068-3-1:2011 | Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ISO 7637-2:2011 | Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only |
| OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology — Basic and general concepts and associated terms (VIM) |
| OIML B 10 : 2011 AMD 2012 | FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.