OIML D 11 : 2013
Current
Current
The latest, up-to-date edition.
GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
Published date
12-01-2013
Sorry this product is not available in your region.
Foreword
1 Introduction
2 Scope and field of application
3 Terminology
4 Instructions for use of this Document in drafting
OIML Recommendations
5 Requirements for measuring instruments with
respect to their environment
6 Type evaluation
7 Initial verification
8 Determination of test levels
9 Instrument performance tests (general)
10 Climate related performance tests
11 Mechanical performance tests
12 External wiring and mains power supply related
performance tests
13 Electromagnetic environment related disturbances
14 Battery and non-mains power supply related
performance tests
Annex A (Informative) - Documentation for type
evaluation
Annex B (Informative) - Durability assessment
Annex C (Informative) - Facility for tests on barometric
pressure
Annex D (Informative) - Bibliography and notes
Gives the OIML Technical Committees, Subcommittees and Project Groups with guidance for establishing appropriate metrological performance testing requirements for influence quantities which may affect the measuring instruments covered by OIML Recommendations. Also gives guidance to OIML Member States in the implementation of OIML Recommendations in their national laws, in particular in their choice on the applicability and severity of performance requirements, as far as these are not prescribed in the OIML Recommendations, but are left to national legislation.
| Committee |
TC 5/SC 1
|
| DevelopmentNote |
French Version of 2013 edition issued on 27/03/2015. (03/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Organisation Internationale de Metrologie Legale
|
| Status |
Current
|
| DIN EN ISO 4064-1:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| 04/30031093 DC : DRAFT FEB 2004 | ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT |
| 11/30217189 DC : 0 | BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| BS EN ISO 4064-4:2014 | Water meters for cold potable water and hot water Non-metrological requirements not covered in ISO 4064-1 |
| OIML R 139-1 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 80-1 : 2009 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 08/30169640 DC : 0 | BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| OIML R 46-1 & 2 : 2012 | ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| UNE-EN 16280:2013 | Breath alcohol test devices for general public - Requirements and test methods |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| OIML R 143 : 2009 | INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS |
| OIML R 85-1 & 2 : 2008 | AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS |
| OIML R 137-1 & 2 : 2012 AMD 2014 | GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| I.S. EN ISO 4064-5:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| UNI CEI EN ISO 4064-5 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS |
| UNI CEI EN ISO 4064-1 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 35-1 : 2007 AMD 2014 | MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 59-1 : 2016 | MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| EN 12261:2018 | Gas meters - Turbine gas meters |
| BS EN 1434-1 : 2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| ISO 4064-4:2014 | Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1 |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| 12/30266709 DC : 0 | BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| DIN EN ISO 4064-5:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| OIML R 115 : 1995 | CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE |
| OIML R 50-1 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| DIN EN ISO 4064-4:2014-11 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014) |
| BS ISO 18132-2:2008 | Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges Gauges in refrigerated-type shore tanks |
| OIML R 144-2 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS |
| ASTM E 3137/E3137M : 2017 | Standard Specification for Heat Meter Instrumentation |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| OIML R 60 ANNEXES : 2017 | METROLOGICAL REGULATION FOR LOAD CELLS ANNEXES |
| UNI EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 1434-1:2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
| AGA XQ0701 : 0 | AGA REPORT NO. 9, MEASUREMENT OF GAS BY MULTIPATH ULTRASONIC METERS |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| OIML R 114 : 1995 | CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| PREN 15964 : DRAFT 2009 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 11/30217192 DC : 0 | BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
| 12/30236609 DC : 0 | BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 |
| 11/30243902 DC : 0 | BS EN 16280 - BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS |
| 12/30266708 DC : 0 | BS EN ISO 4064-1 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| UNI CEI EN ISO 4064-2 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| UNI EN 16280 : 2013 | BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS |
| 11/30215951 DC : 0 | BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
| ISO 18132-2:2008 | Refrigerated light hydrocarbon fluids — General requirements for automatic level gauges — Part 2: Gauges in refrigerated-type shore tanks |
| BS EN 16280:2012 | Breath alcohol test devices for general public. Requirements and test methods |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| OIML R 137-1 : 2006 | GAS METERS - PART 1: REQUIREMENTS |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 16280:2012 | BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 4064-4:2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014) |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| OIML R 139 : 2007 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES |
| OIML R 49-2 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
| OIML R 35-2 : 2011 | MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS |
| OIML R 126 : 2012 | EVIDENTIAL BREATH ANALYZERS |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| API 551 : 2016 | PROCESS MEASUREMENT |
| I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| OIML D 22 : 1991 | GUIDE TO PORTABLE INSTRUMENTS FOR ASSESSING AIRBORNE POLLUTANTS ARISING FROM HAZARDOUS WASTES |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| 00/122333 DC : DRAFT JUNE 2000 | BS EN 13917-1 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 1: GENERAL REQUIREMENTS |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| BS EN ISO 4064-1:2017 | Water meters for cold potable water and hot water Metrological and technical requirements |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| OIML D 31 : 2008 | GENERAL REQUIREMENTS FOR SOFTWARE CONTROLLED MEASURING INSTRUMENTS |
| OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
| BS EN 15964:2011 | Breath alcohol test devices other than single use devices. Requirements and test methods |
| 09/30202737 DC : 0 | BS EN 15964 - BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| 04/30031075 DC : DRAFT FEB 2004 | ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS |
| UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| UNE-EN 15964:2012 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
| UNE-EN ISO 4064-1:2015 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| DIN EN 1434-1:2016-02 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| OIML R 50-2 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| UNE-EN 1434-1:2016 | Heat meters - Part 1: General requirements |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water Part 2: Test methods |
| ISO 4064-5:2014 | Water meters for cold potable water and hot water — Part 5: Installation requirements |
| UNE-EN ISO 4064-4:2015 | Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014) |
| EN ISO 4064-1:2017 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| EN 15964:2011 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| EN ISO 4064-5:2017 | Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014) |
| EN 16280:2012 | Breath alcohol test devices for general public - Requirements and test methods |
| UNE-EN ISO 4064-5:2015 | Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014) |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| OIML R 49-1 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| UNI CEI EN ISO 4064-4 : 2014 | Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 |
| 00/122334 DC : DRAFT JUNE 2000 | BS EN 13917-2 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 2: PATTERN APPROVAL TESTS |
| BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
| 12/30236613 DC : 0 | BS EN ISO 4064-5 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS |
| 09/30207853 DC : 0 | BS EN 12405-2 - GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| I.S. EN ISO 4064-1:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| BS EN ISO 4064-5:2017 | Water meters for cold potable water and hot water Installation requirements |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| 10/30232464 DC : 0 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| OIML R 146-1 : 2016 | PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 76-1 : 2006 | NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| OIML R 139-2 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| OIML R 144-1 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| EN 1434-1:2015 | Heat meters - Part 1: General requirements |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 15964:2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN ISO 4064-5:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| DIN EN ISO 4064-1:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| IEC 61000-4-19:2014 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| IEC 60068-2-18:2017 | Environmental testing - Part 2-18: Tests - Test R and guidance: Water |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| IEC 61000-4-1:2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| IEC 60068-3-1:2011 | Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 60512-11-8:1995 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| IEC 60721-2-5:1991 | Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| IEC 60512-14-7:1997 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water |
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| IEC 60068-3-8:2003 | Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC TR 61000-2-1:1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
| IEC 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| OIML V 1 : 2013 | INTERNATIONAL VOCABULARY OF TERMS IN LEGAL METROLOGY (VIML) |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.