NSF 61 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS
Available format(s)
Hardcopy , PDF
Superseded date
07-01-2018
Superseded by
Language(s)
English
Published date
05-01-2016
Publisher
| DocumentType |
Standard
|
| Pages |
292
|
| PublisherName |
NSF International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI/AWWA C620 : 2007(R2017) | SPRAY-APPLIED IN-PLACE EPOXY LINING OF WATER PIPELINES, 3 IN. (75 MM) AND LARGER |
| ASTM D 3139 : 1998 : R2011 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| NACE SP 01 96 : 2015 | GALVANIC ANODE CATHODIC PROTECTION OF INTERNAL SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS |
| ASTM D 3517 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ANSI/AWWA C213 : 2015 | FUSION-BONDED EPOXY COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS |
| UFC 3-230-01 : Change 2 | UNIFIED FACILITIES CRITERIA - WATER STORAGE, DISTRIBUTION, AND TRANSMISSION |
| AWWA B114 : 2016 | REVERSE OSMOSIS AND NANOFILTRATION SYSTEMS FOR WATER TREATMENT |
| NSF BENZYL ALCOHOL : 2002 | BENZYL ALCOHOL |
| MIL-PRF-32307 Revision A:2017 | VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
| ASTM F 3110 : 2014 | Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints |
| NSF 55 : 2017 | ULTRAVIOLET MICROBIOLOGICAL WATER TREATMENT SYSTEMS |
| NSF 419 : 2015 | PUBLIC DRINKING WATER EQUIPMENT PERFORMANCE - FILTRATION |
| ASTM F 1173 : 2001 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| AWWA M27 : 3 | EXTERNAL CORROSION CONTROL FOR INFRASTRUCTURE SUSTAINABILITY |
| AWWA E103 : 2015 | HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
| ASTM D 1527 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| MIL-DTL-18030 Revision F:2018 | Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
| MS14308 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 125 |
| CSA B45 SERIES : 2002 : R2013 | PLUMBING FIXTURES |
| ASTM D 2104 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) |
| MS14314 Revision E:2015 | PLUGS, PIPE, BRASS OR BRONZE, THREADED (SQUARE HEAD AND SQUARE SOCKET), CLASSES 250 AND 125 |
| AWWA M55 : 1 | PE PIPE - DESIGN AND INSTALLATION |
| AWWA C906:2015 | POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS |
| AWWA D106 : 2016 | SACRIFICIAL ANODE CATHODIC PROTECTION SYSTEMS FOR THE INTERIOR SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| AWWA C116/A21.16 : 2009 | PROTECTIVE FUSION-BONDED COATINGS FOR THE INTERIOR AND EXTERIOR SURFACES OF DUCTILE-IRON AND GRAY- IRON FITTINGS |
| AWWA G200 : 2015 | DISTRIBUTION SYSTEMS OPERATION AND MANAGEMENT |
| AWWA B202 : 2013 | QUICKLIME AND HYDRATED LIME |
| ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| NSF 62 : 2017 | DRINKING WATER DISTILLATION SYSTEMS |
| ASTM F 2880 : 2014 : REDLINE | Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <fraction><num>3/4</den></fraction > in. to 65 in. |
| AWWA C904 : 2016 | CROSSLINKED POLYETHYLENE (PEX) PRESSURE TUBING, 1/2 IN. (13 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| CSA 4.10 : 2015 | NON-METALLIC DIP TUBES FOR USE IN WATER HEATERS |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| AWWA C223 : 2013 | FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES |
| AWWA D104 : 2017 | AUTOMATICALLY CONTROLLED, IMPRESSED-CURRENT CATHODIC PROTECTION FOR THE INTERIOR SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS |
| MSS SP 145 : 2013 | METAL BALL VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
| NSF 401 : 2017 | DRINKING WATER TREATMENT UNITS - EMERGING COMPOUNDS/INCIDENTAL CONTAMINANTS |
| ASTM D 1527 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) |
| ASTM F 1986 : 2001 : R2006 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASME A112.4.14-2017/CSA B125.14-17 | Manually operated valves for use in plumbing systems |
| ASTM F 2806 : 2010 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 2969 : 2012 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
| ASTM D 3139 : 1998 : R2005 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ASTM F 1173 : 2001 : R2006 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1986 : 2001 : R2011 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
| ASME A112.18.1 : 2012 | PLUMBING SUPPLY FITTINGS |
| ASME A112.18.1 : 2012 : R2017 | PLUMBING SUPPLY FITTINGS |
| MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
| NACE SP 03 88 : 2014 | IMPRESSED CURRENT CATHODIC PROTECTION OF INTERNAL SUBMERGED SURFACES OF CARBON STEEL WATER STORAGE TANKS |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| AWWA B116 : 2015 | ELECTRODIALYSIS AND ION-EXCHANGE MEMBRANE SYSTEMS |
| AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
| ISO 15840:2004 | Ships and marine technology — Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| NSF 330 : 2015 | GLOSSARY OF DRINKING WATER TREATMENT UNIT TERMINOLOGY |
| MS14305 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 125 |
| NSF AWWA/ANSI 375 - 2016 | SUSTAINABILITY ASSESSMENT FOR WATER CONTACT PRODUCTS |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| MS14309 Revision E:2015 | TEES, PIPE, BRASS OR BRONZE, THREADED, REDUCING, CLASS 125 |
| FM 1614 : 2017 | FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| CSA/ANSI Z21.98 : 2015 | NON-METALLIC DIP TUBES FOR USE IN WATER HEATERS |
| A-A-59567 Revision A:2014 | HOSE AND HOSE ASSEMBLIES, RUBBER (YARN OR FABRIC REINFORCED) WATER SERVICE |
| CSA B45 SERIES :2002 | PLUMBING FIXTURES |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| CSA B64 SERIES : 2011 : INC : UPD 2 : 2015 | BACKFLOW PREVENTERS AND VACUUM BREAKERS |
| ANSI/AWWA C224 : 2017 | NYLON-11-BASED POLYAMIDE COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS |
| ASTM F 2806 : 2010 : R2015 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| AWWA B604 : 2012 | GRANULAR ACTIVATED CARBON |
| NSF 58 : 2017 | REVERSE OSMOSIS DRINKING WATER TREATMENT SYSTEMS |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| AWWA D108 : 2010 | ALUMINUM DOME ROOFS FOR WATER STORAGE FACILITIES |
| AWWA C518 : 2013 | DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE |
| AWWA C901 : 2017 | POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| NSF 244 : 2018 | DRINKING WATER TREATMENT UNITS - SUPPLEMENTAL MICROBIOLOGICAL WATER TREATMENT SYSTEMS - FILTRATION |
| AWWA B101 : 2016 | PRECOAT FILTER MEDIA |
| AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
| AWWA D102 : 2017 | COATING STEEL WATER-STORAGE TANKS |
| AWWA C703 : 2015 | COLD-WATER METERS - FIRE-SERVICE TYPE |
| AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
| AWWA C550 : 2017 | PROTECTIVE INTERIOR COATINGS FOR VALVES AND HYDRANTS |
| AWWA C516 : 2014 | LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER |
| AWWA C651 : 2014 | DISINFECTING WATER MAINS |
| NSF 359 : 2011 | VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
| ACI 364.12T : 2015 | REPAIR OF LEAKING CRACKS IN WALLS OF LIQUID CONTAINMENT STRUCTURES |
| ANSI/AWWA C714 : 2013 | COLD-WATER METERS FOR RESIDENTIAL FIRE SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| ASTM F 1380 : 1995 : REV A | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| AWWA F101 : 2013 | CONTACT-MOLDED, FIBERGLASS-REINFORCED PLASTIC WASH-WATER TROUGHS AND LAUNDERS |
| NSF N-BUTYL ACETATE : 2003 | NSF N-BUTYL ACETATE |
| NFPA 1961 : 2013 | FIRE HOSE |
| ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| CSA C22.2 No. 130 : 2016 | REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| ASTM F 1173 : 2001 : R2012 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM F 1974:2009 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM F 2735 : 2009 | Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
| ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM F 845 : 1996 | Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) |
| ASTM F 2719 : 2009 : R2015 | Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) |
| ASTM F 1380 : 1995 : REV A : R2002 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
| ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASME A112.4.14 : 2017 | MANUALLY OPERATED QUARTER-TURN SHUTOFF VALVES FOR USE IN PLUMBING SYSTEMS |
| NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
| B125.3-18 | Plumbing fittings |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| AWWA C654 : 2013 | DISINFECTION OF WELLS |
| AWWA C606 : 2015 | GROOVED AND SHOULDERED JOINTS |
| MS51952 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STREET, CLASS 125 |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| AWWA C210 : 2015 | LIQUID-EPOXY COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS |
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ANSI/AWWA G100:2017 | WATER TREATMENT PLANT OPERATION AND MANAGEMENT |
| MSS SP 98 : 2015 | PROTECTIVE COATINGS FOR THE INTERIOR OF VALVES, HYDRANTS, AND FITTINGS |
| ANSI/AWWA D120 : 2009 | THERMOSETTING FIBERGLASS-REINFORCED PLASTIC TANKS |
| MS14311 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 250 |
| ASTM D 3000 : 1995 : REV A : EDT 1 | Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003) |
| ASTM F 1483 : 2017 : REDLINE | Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
| ASSE 1070-2020/ASME A112.1070-2020/CSA B125.70 : 2015 | PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
| MS14312 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 250 |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| AWWA C905 : 2010 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
| AWWA G400 : 2009 | UTILITY MANAGEMENT SYSTEM |
| AWWA A100 : 2015 | WATER WELLS |
| ANSI/AWWA C652 : 2011 | DISINFECTION OF WATER-STORAGE FACILITIES |
| AWWA M68 : 2017 | WATER QUALITY IN DISTRIBUTION SYSTEMS |
| ASTM D 2466 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| AWWA C520 : 2014 | KNIFE GATE VALVES, SIZES 2 IN. (50 MM) THROUGH 96 IN. (2,400 MM) |
| AWWA B110 : 2009 | MEMBRANE SYSTEMS |
| ASCE 36 01 : 2001 | STANDARD CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| ASTM F 656 : 2015 : REDLINE | Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM F 1173 : 2001 : R2018 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1986 : 2001 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| CSA B483.1 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201200 | DRINKING WATER TREATMENT SYSTEMS |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| CSA B483.1 : 2007 : INC : UPD 2 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201700 | DRINKING WATER TREATMENT SYSTEMS |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| CSA B483.1 : 2007 | DRINKING WATER TREATMENT SYSTEMS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| NSF METHYL ISOAMYL KETONE : 2002 | METHYL ISOAMYL KETONE |
| NSF T-BUTANOL : 2003 | T-BUTANOL |
| AWWA C560:2014 | CAST-IRON SLIDE GATES |
| AWWA C104/A21.4 : 2016 | CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE |
| ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
| AWWA C900 : 2016 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
| CSA B125.1:2012 | PLUMBING SUPPLY FITTINGS |
| NACE RP 03 88 : 1995 | IMPRESSED CURRENT CATHODIC PROTECTION OF INTERNAL SUBMERGED SURFACES OF CARBON STEEL WATER STORAGE TANKS |
| NACE RP 01 96 : 2004 | GALVANIC ANODE CATHODIC PROTECTION OF INTERNAL SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS |
| MS14310 Revision D:2015 | CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125 |
| CSA C448 SERIES : 2016 | DESIGN AND INSTALLATION OF GROUND SOURCE HEAT PUMP SYSTEMS FOR COMMERCIAL AND RESIDENTIAL BUILDINGS |
| ASTM F 2829 : 2010 | Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| FM 1043 : 2011 | WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE |
| AWWA M41 : 3 | Ductile-Iron Pipe and Fittings, Third Edition |
| MS14315 Revision D:2015 | BUSHINGS, PIPE, BRASS OR BRONZE, THREADED (OUTSIDE HEAD, INSIDE HEAD, AND FACE) CLASS 250 |
| 02/713763 DC : DRAFT DEC 2002 | ISO 15840 - SHIPS AND MARINE TECHNOLOGY - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBREGLASS PIPE AND FITTINGS TO BE USED FOR MARINE APPLICATIONS |
| FM 1344 : 2010 | AIR RELEASE VALVES 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
| WW-P-460 Revision F:2015 | PIPE FITTINGS; BRASS OR BRONZE (THREADED), CLASSES 125 AND 250 POUND |
| MS14307 Revision D:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEGREE, STREET, CLASS 125 |
| MS14306 Revision D:2015 | FITTINGS, PIPE, BRASS OR BRONZE, THREADED (REDUCERS, CLOSE AND OPEN RETURN BENDS, AND 45-DEGREE Y-BRANCHES), CLASS 125 |
| (INACTIVE RECORD)CSA B45 SERIES:2002 | PLUMBING FIXTURES |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| CSA B356 : 2000 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| CSA B64 SERIES : 2011 | BACKFLOW PREVENTERS AND VACUUM BREAKERS |
| MIL-DTL-17840 Revision D:2018 | Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application) |
| CSA B64 SERIES : 2011 : INC : UPD 1 : 2015 | BACKFLOW PREVENTERS AND VACUUM BREAKERS |
| AWWA C563 : 2014 | FABRICATED COMPOSITE SLIDE GATES |
| ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
| CSA B242 : 2005 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
| AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
| AWWA C203 : 2015 | COAL-TAR PROTECTIVE COATINGS AND LININGS FOR STEEL WATER PIPE |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| AWWA C517 : 2016 | RESILIENT-SEATED CAST-IRON ECCENTRIC PLUG VALVES |
| ASTM F 3182 : 2016 | Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water |
| NSF 42 : 2017 | DRINKING WATER TREATMENT UNITS - AESTHETIC EFFECTS |
| ASTM D3139 : 1998 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ASTM D 6263 : 2015 : REDLINE | Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
| ASTM F 3034 : 2015 : REDLINE | Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE) |
| ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| FM 1612 : 2016 | POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE |
| ASTM D 6041 : 2011 | Standard Specification for Contact-Molded <span class='unicode'>“</span>Fiberglass<span class='unicode'>”</span> (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| MSS SP 139 : 2014 | COPPER ALLOY GATE, GLOBE, ANGLE, AND CHECK VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
| ASTM D 1527 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| NSF 50 : 2016 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
| AWWA C512 : 2015 | AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE |
| FM 1613 : 2017 | POLYETHYLENE (PE) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| AWWA C751 : 2016 | MAGNETIC INDUCTIVE FLOWMETERS |
| MIL-C-44216 Revision A:1989 | CANTEEN, WATER, COLLAPSIBLE, 5 QUART CAPACITY |
| ASSE 1070 : 2015 | PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
| MIL-DTL-24227 Revision A:2018 | Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection |
| AWWA M28 : 2014 | REHABILITATION OF WATER MAINS |
| ASTM F 2165 : 2013-12 | SPECIFICATION FOR FLEXIBLE PRE-INSULATED PIPING |
| ANSI/AWWA D103 : 2009 | FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE |
| MIL-DTL-1189 Revision E:2018 | VALVE, GATE, BRONZE |
| NSF Y-BUTYROLACTONE : 2003 | Y-BUTYROLACTONE |
| ANSI/AWWA C903:2016 | POLYETHYLENE-ALUMINUM-POLYETHYLENE (PEALPE) COMPOSITE PRESSURE PIPE, 12 MM (1/2 IN.) THROUGH 51 MM (2 IN.), FOR WATER SERVICE |
| CSA B356 : 2000 : R2005 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| CSA B242 : 2005 : R2016 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
| CSA B356 : 2000 : R2010 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| AWWA M65 : 2014 | ON-SITE GENERATION OF HYPOCHLORITE |
| UFC 3-570-01 : 2016 | UNIFIED FACILITIES CRITERIA (UFC) - CATHODIC PROTECTION |
| CSA B64 SERIES : 2011 : R2016 | BACKFLOW PREVENTERS AND VACUUM BREAKERS |
| BS ISO 15840:2004 | Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| AWWA C907 : 2017 | INJECTION-MOLDED POLYVINYL CHLORIDE (PVC) PRESSURE FITTINGS, 4 IN. THROUGH 12 IN. (100 MM THROUGH 300 MM), FOR WATER, WASTEWATER, AND RECLAIMED WATER SERVICE |
| ASME A112.18.6-2017/CSA B125.6-17 | Flexible water connectors |
| MS51845 Revision E:2015 | ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STRAIGHT, CLASS 125 |
| ANSI/AWWA B112 : 2015 | MICROFILTRATION AND ULTRAFILTRATION MEMBRANE SYSTEMS |
| CAN/CSA-B126 SERIES-13 (R2018) | Water cisterns |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
| NSF 14 : 2016 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| NSF 44 : 2017 | RESIDENTIAL CATION EXCHANGE WATER SOFTENERS |
| NSF 53 : 2016 | DRINKING WATER TREATMENT UNITS - HEALTH EFFECTS |
| ASTM F 2718 : 2009 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines |
| ASTM F 2718 : 2009 : R2015 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) |
| ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
| ASTM D 2235 : 2004 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| AWWA F110 : 2016 | ULTRAVIOLET DISINFECTION SYSTEMS FOR DRINKING WATER |
| ASTM F 2806 : 2010 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 2719 : 2009 | Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines |
| ASTM D 2447 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
| ASTM F 2829/F2829M : 2015 : REDLINE | Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM E 2892 : 2015 | Standard Test Method for Odor and Flavor Transfer from Materials in Contact with Municipal Drinking Water |
| ASTM F 2735 : 2009 : R2016 | Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| CSA F379 SERIES : 2009 | PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS (LIQUID-TO-LIQUID HEAT TRANSFER) |
| CSA F379 SERIES : 2009 : INC : UPD 2 : 2013 : R201300 | PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS (LIQUID-TO-LIQUID HEAT TRANSFER) |
| ASME A112.18.6 : 2009 : R2014 | FLEXIBLE WATER CONNECTORS |
| PIP CTSC1000 : 2017 | APPLICATION OF COATINGS TO CONCRETE |
| ASME A112.1.3 : 2000 : R2005 | AIR GAP FITTINGS FOR USE WITH PLUMBING FIXTURES, APPLIANCES, AND APPURTENANCES |
| ASME A112.18.6 : 2009 | FLEXIBLE WATER CONNECTORS |
| ASME B16.51 : 2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME A112.1.3 : 2000 : R2015 | AIR GAP FITTINGS FOR USE WITH PLUMBING FIXTURES, APPLIANCES, AND APPURTENANCES |
| ASME A112.1.3 : 2000 : R2010 | AIR GAP FITTINGS FOR USE WITH PLUMBING FIXTURES, APPLIANCES, AND APPURTENANCES |
| ANSI/AWWA C219:2023 | Bolted Sleeve-Type Couplings for Plain-End Pipe |
| CSA F379 SERIES : 2009 : INC : UPD 1 : 2011 | PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS (LIQUID-TO-LIQUID HEAT TRANSFER) |
| CSA F379 SERIES : 2009 : INC : UPD 3 : 2014 : R201300 | PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS (LIQUID-TO-LIQUID HEAT TRANSFER) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.