NSF 372 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DRINKING WATER SYSTEM COMPONENTS - LEAD CONTENT
Hardcopy , PDF
English
01-01-2016
18-12-2020
1 Purpose, scope, and normative references
2 Definitions
3 General requirements
4 Weighted average lead content calculation
5 Percentage lead content of water contact surfaces
6 Lead content verification testing
7 Analytical Procedures for Determining Percent Lead
Content of Materials
Annex A (Informational) - Example weighted average lead
content calculation
Applicable to any drinking water system component that conveys or dispenses water for human consumption through drinking or cooking.
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
NSF International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 3110 : 2014 | Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints |
| AWWA E103 : 2015 | HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
| MS14308 Revision D:2015 | Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Reducing, Class 125 |
| MS14314 Revision E:2015 | Plugs, Pipe, Brass or Bronze, Threaded (Square Head and Square Socket), Classes 250 and 125 |
| ASME A112.18.1 : 2012 | PLUMBING SUPPLY FITTINGS |
| ASME A112.18.1 : 2012 : R2017 | PLUMBING SUPPLY FITTINGS |
| MS14305 Revision D:2015 | Fittings, Pipe, Brass or Bronze, Threaded (Tees, Crosses, 45-Degree Elbows, and Couplings), Class 125 |
| NSF AWWA/ANSI 375 - 2016 | SUSTAINABILITY ASSESSMENT FOR WATER CONTACT PRODUCTS |
| MS14309 Revision E:2015 | Tees, Pipe, Brass or Bronze, Threaded, Reducing, Class 125 |
| NSF 61 : 2017 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
| AWWA C516 : 2014 | LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER |
| ANSI/AWWA C714 : 2013 | COLD-WATER METERS FOR RESIDENTIAL FIRE SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| ASME A112.4.14 : 2017 | MANUALLY OPERATED QUARTER-TURN SHUTOFF VALVES FOR USE IN PLUMBING SYSTEMS |
| MS51952 Revision D:2015 | Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Street, Class 125 |
| MS14311 Revision D:2015 | Fittings, Pipe, Brass or Bronze, Threaded (90-Degree Elbows, Tees, Crosses, 45-Degree Elbows, and Couplings), Class 250 |
| MS14312 Revision D:2015 | Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Reducing, Class 250 |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| MS14310 Revision D:2015 | Caps, Pipe, Brass or Bronze, Threaded, Class 125 |
| MS14315 Revision D:2015 | Bushings, Pipe, Brass or Bronze, Threaded (Outside Head, Inside Head, and Face) Class 250 |
| WW-P-460 Revision F:2015 | Pipe Fittings; Brass or Bronze (Threaded), Classes 125 and 250 Pound |
| MS14307 Revision D:2015 | Elbows, Pipe, Brass or Bronze, Threaded, 45-Degree, Street, Class 125 |
| MS14306 Revision D:2015 | Fittings, Pipe, Brass or Bronze, Threaded (Reducers, Close and Open Return Bends, and 45-Degree Y-Branches), Class 125 |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| AWWA C517 : 2016 | RESILIENT-SEATED CAST-IRON ECCENTRIC PLUG VALVES |
| ASTM F 3182 : 2016 | Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water |
| AWWA C512 : 2015 | AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE |
| MS51845 Revision E:2015 | Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Straight, Class 125 |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASME A112.1070 : 2015 | PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
| ICC California Residential Code:2019 | California Residential Code, Title 24, Part 2.5 |
| AWWA C520 : 2019 | Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm) |
| ASME A112.18.6 : 2009 : R2014 | FLEXIBLE WATER CONNECTORS |
| AWWA C518:2018 | AWWA C518-18 Double-Disc Swing-Check Valves for Waterworks Service 2-in. Through 48-in.(50-mm Through 1,200-mm) NPS |
| ASME A112.18.6 : 2009 | FLEXIBLE WATER CONNECTORS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.