NSF 14 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS
Available format(s)
Hardcopy , PDF
Superseded date
11-01-2018
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Defines minimum physical, performance, health effects, quality assurance, marking and recordkeeping requirements for plastic piping components and related materials.
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
NSF International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 2854 : 2010 : R2016 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| MIL-PRF-53068 Revision B:2010 | TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW 160 GALLON (NOMINAL), DRINKING WATER |
| ASTM D 1527 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ASTM D 2282 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM F 3182 : 2016 | Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water |
| ISO 6509-2:2017 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria |
| ASTM F 2880 : 2014 : REDLINE | Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <fraction><num>3/4</den></fraction > in. to 65 in. |
| AWWA C904 : 2016 | CROSSLINKED POLYETHYLENE (PEX) PRESSURE TUBING, 1/2 IN. (13 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 9: Mechanical gas thermostats |
| CSA 4.10 : 2015 | NON-METALLIC DIP TUBES FOR USE IN WATER HEATERS |
| ASTM D 1527 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) |
| ASTM D 3261 : 2016-11 | SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
| ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ASTM F 2806 : 2010 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 2969 : 2012 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
| ASTM F 1380 : 1995 : REV A | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 2829 : 2010 | Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
| ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 | 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
| ASTM D 2468 : 1996 : REV A | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003) |
| CSA 4.4 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| ANSI Z21.98 : 2015 | NON-METALLIC DIP TUBES FOR USE IN WATER HEATERS |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA 4.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM F 2806 : 2010 : R2015 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| NSF 359 : 2011 | VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
| ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM F 1974:2009 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM F 2735 : 2009 | Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
| ASTM F 437 : 2015 : REDLINE | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM F 1733 : 2013 : REDLINE | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| ASTM F 845 : 1996 | Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) |
| ASTM F 2719 : 2009 : R2015 | Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) |
| ASTM F 1380 : 1995 : REV A : R2002 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 | Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM F 3253 : 2017 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems |
| ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM F 2854 : 2010 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| CSA/ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
| 14/30303563 DC : 0 | BS ISO 23551-9 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 9: MECHANICAL GAS THERMOSTATS |
| L-P-00315 Revision D:1976 | PIPE AND TUBING, NONMETALLIC (PLASTIC) |
| ASTM D 2282 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) |
| BS ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Mechanical gas thermostats |
| ASTM D 2672 : 2014 : REDLINE | Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM D 2104 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM D 3000 : 1995 : REV A : EDT 1 | Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003) |
| ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ASTM F 1237 : 2015 : REDLINE | Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing |
| CSA/ANSI Z21-10-3 : 2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM F 656 : 2015 : REDLINE | Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| ICC ISPSC CODE AND COMMENTARY : 2015 | ISPSC® Code and Commentary |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
| CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.23:2010 | GAS APPLIANCE THERMOSTATS |
| CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| ICC ISPSC INTERNATIONAL SWIMMING POOL AND SPA CODE : 2015 | INTERNATIONAL SWIMMING POOL AND SPA CODE[TM] (ISPSC[TM]) |
| ANSI Z21.23 : 2010 : R2015 | GAS APPLIANCE THERMOSTATS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| L-P-315 Revision C:1972 | PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR) |
| ASTM F 2165 : 2013-12 | SPECIFICATION FOR FLEXIBLE PRE-INSULATED PIPING |
| ASTM D 2282 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ASTM F 1483 : 2017 : REDLINE | Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
| ASTM D 2466 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM F 3034 : 2015 : REDLINE | Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE) |
| ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM D 1527 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| NSF 50 : 2016 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
| NSF P 181 : 2004 | RESIDENTIAL PORTABLE ELECTRICAL SPAS |
| ASTM F 876 : 2017 : REDLINE | SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
| IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
| ASTM F 2718 : 2009 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines |
| ASTM F 2718 : 2009 : R2015 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) |
| ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
| ASTM D 2235 : 2004 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM F 2806 : 2010 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 2719 : 2009 | Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines |
| ASTM F 859 : 2015 : REDLINE | Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type |
| ASTM D 2447 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
| ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
| ASTM F 2829/F2829M : 2015 : REDLINE | Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM F 2735 : 2009 : R2016 | Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
| CSA/ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA/ANSI LC 6:08 (R2018) | Natural gas operated diaphragm pumps |
| CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| CSA/ANSI Z21.71:1993 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| ASSE 1050 : 2009 | PERFORMANCE REQUIREMENTS FOR STACK AIR ADMITTANCE VALVES FOR SANITARY DRAINAGE SYSTEMS |
| ASTM D 3034 : 2016 : REDLINE | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM F 876 : 2017 : REDLINE | SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
| AWWA C909 : 2009 | MOLECULARLY ORIENTED POLYVINYL CHLORIDE (PVCO) PRESSURE PIPE, 4 IN. (100 MM) AND LARGER |
| NSF 61 : 2016 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM F 2929 : 2013 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| ASTM D 3517 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D 3261 : 2016-11 | SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
| ASTM F 1412 : 2016 : REDLINE | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM D 6394 : 2014 : REDLINE | Standard Specification for Sulfone Plastics (SP) |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| CSA B125.3 : 2012 | PLUMBING FITTINGS |
| ASSE 1061 : 2015 | PERFORMANCE REQUIREMENTS FOR PUSH-FIT FITTINGS |
| ASTM D 6284 : 2017 : REDLINE | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| CSA B137.3 : 2009 GEN INS 1 11 | RIGID POLYVINYLCHLORIDE (PVC) PIPE AND FITTINGS FOR PRESSURE APPLICATIONS |
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| DIN 8078:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM F 409 : 2017 : REDLINE | Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| ASTM F 891 : 2016 : REDLINE | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
| CFR 21(PTS170-199) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 170-199 |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM F 2623 : 2015-01 | SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM D 543 : 2014 : REDLINE | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 4067 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
| ASTM D 6778 : 2014 : REDLINE | Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
| ASTM D 2996 : 2017 : REDLINE | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/AWWA C950:2013 | FIBERGLASS PRESSURE PIPE |
| ASTM F 667/F667M : 2016 : REDLINE | Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings |
| ASTM F 1336 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| AWWA C904 : 2016 | CROSSLINKED POLYETHYLENE (PEX) PRESSURE TUBING, 1/2 IN. (13 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| ASTM F 679 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
| AWWA C906:2015 | POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS |
| ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| CSA B181.3 : 2011 GEN INS 1 11 | POLYOLEFIN AND POLYVINYLIDENE FLUORIDE (PVDF) LABORATORY DRAINAGE SYSTEMS |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| CSA B137.10 : 2009 GEN INS 1 11 | CROSSLINKED POLYETHYLENE/ALUMINUM/CROSSLINKED POLYETHYLENE (PEX-AL-PEX) COMPOSITE PRESSURE-PIPE SYSTEMS |
| ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM D 3965 : 2016 : REDLINE | Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
| NSF 359 : 2011 | VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
| ASTM F 1504 : 2014 : REDLINE | Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| CSA B137.1 : 2009 GEN INS 1 11 | POLYETHYLENE (PE) PIPE, TUBING, AND FITTINGS FOR COLD-WATER PRESSURE SERVICES |
| ASTM D 2855 : 2015 : REDLINE | Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets |
| ASME A112.4.14 : 2017 | MANUALLY OPERATED QUARTER-TURN SHUTOFF VALVES FOR USE IN PLUMBING SYSTEMS |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| CAN/CSA-B182.14-12/B182.15-12 | Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings/Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings |
| ASTM F 1760 : 2016 : REDLINE | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| CSA B181.5 : 2011 GEN INS 1 11 | COEXTRUDED ACRYLONITRILE-BUTADIENE-STYRENE/POLYVINYLCHLORIDE (ABS/PVC) DRAIN, WASTE, AND VENT PIPE |
| ASTM D 2672 : 2014 : REDLINE | Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
| ASTM D 2683 : 2014 : REDLINE | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
| ASSE 1051 : 2009 | PERFORMANCE REQUIREMENTS FOR INDIVIDUAL AND BRANCH TYPE AIR ADMITTANCE VALVES FOR SANITARY DRAINAGE SYSTEMS |
| CFR 21(PTS100-169) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 100-169 |
| ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| CSA C448 SERIES : 2016 | DESIGN AND INSTALLATION OF GROUND SOURCE HEAT PUMP SYSTEMS FOR COMMERCIAL AND RESIDENTIAL BUILDINGS |
| ASSE 1049 : 2009 | PERFORMANCE REQUIREMENTS FOR INDIVIDUAL AND BRANCH TYPE AIR ADMITTANCE VALVES FOR CHEMICAL WASTE SYSTEMS |
| ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| ASTM F 1216 : 2016 : REDLINE | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| AWWA C901 : 2017 | POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| NSF 60 : 2016 | DRINKING WATER TREATMENT CHEMICALS - HEALTH EFFECTS |
| ASTM D 2466 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| CSA B182.8 : 2011 GEN INS 1 11 | PROFILE POLYETHYLENE (PE) STORM SEWER AND DRAINAGE PIPE AND FITTINGS |
| ASTM F 2023 : 2015 : REDLINE | Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water |
| CSA B137.11 : 2009 GEN INS 1 11 | POLYPROPYLENE (PP-R) PIPE AND FITTINGS FOR PRESSURE APPLICATIONS |
| AWWA C907 : 2017 | INJECTION-MOLDED POLYVINYL CHLORIDE (PVC) PRESSURE FITTINGS, 4 IN. THROUGH 12 IN. (100 MM THROUGH 300 MM), FOR WATER, WASTEWATER, AND RECLAIMED WATER SERVICE |
| ASTM F 1483 : 2017 : REDLINE | Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
| ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| CFR 21(PTS1-99) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 1-99 |
| CSA B137.9 : 2009 GEN INS 1 11 | POLYETHYLENE/ALUMINUM/POLYETHYLENE (PE-AL-PE) COMPOSITE PRESSURE-PIPE SYSTEMS |
| ASTM D 2665 : 2014 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
| ASTM F 1055 : 2016-09 | SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE AND CROSSLINKED POLYETHYLENE (PEX) PIPE AND TUBING |
| CSA B181.2 : 2011 GEN INS 1 11 | POLYVINYLCHLORIDE (PVC) AND CHLORINATED POLYVINYLCHLORIDE (CPVC) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
| ASTM F 2969 : 2012 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
| DIN 8077:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| CSA B181.1 : 2011 GEN INS 1 11 | ACRYLONITRILE-BUTADIENE-STYRENE (ABS) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
| CSA B182.4 : 2011 GEN INS 1 11 | PROFILE POLYVINYLCHLORIDE (PVC) SEWER PIPE AND FITTINGS |
| ASTM F 656 : 2015 : REDLINE | Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM D 1243 : 2015 : REDLINE | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM F 437 : 2015 : REDLINE | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D 2992 : 2012 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ASTM D 2997 : 2015 : REDLINE | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| CSA B182.6 : 2011 GEN INS 1 11 | PROFILE POLYETHYLENE (PE) SEWER PIPE AND FITTINGS FOR LEAK-PROOF SEWER APPLICATIONS |
| CSA B137.5 : 2009 GEN INS 1 11 | CROSSLINKED POLYETHYLENE (PEX) TUBING SYSTEMS FOR PRESSURE APPLICATIONS |
| ASTM D 4396 : 2015 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
| ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| AWWA C900 : 2016 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| CSA B137.6 : 2009 GEN INS 1 11 | CHLORINATED POLYVINYLCHLORIDE (CPVC) PIPE, TUBING, AND FITTINGS FOR HOT- AND COLD-WATER DISTRIBUTION SYSTEMS |
| ASTM D 1784 : 2011 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| ASTM F 949 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
| CSA B137.4 : 2009 GEN INS 1 11 | POLYETHYLENE (PE) PIPING SYSTEMS FOR GAS SERVICES |
| CSA B182.11 : 2011 GEN INS 1 11 | STANDARD PRACTICE FOR THE INSTALLATION OF THERMOPLASTIC DRAIN, STORM, AND SEWER PIPE AND FITTINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.