NFPA 99 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HEALTH CARE FACILITIES CODE
Available format(s)
Hardcopy
Superseded date
10-11-2020
Superseded by
Language(s)
English
Published date
01-01-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - Fundamentals
Chapter 5 - Gas and Vacuum Systems
Chapter 6 - Electrical Systems
Chapter 7 - Information Technology and
Communications Systems
Chapter 8 - Plumbing
Chapter 9 - Heating, Ventilation, and Air
Conditioning (HVAC)
Chapter 10 - Electrical Equipment
Chapter 11 - Gas Equipment
Chapter 12 - Emergency Management
Chapter 13 - Security Management
Chapter 14 - Hyperbaric Facilities
Chapter 15 - Dental Gas and Vacuum Systems
Chapter 16 - Features of Fire Protection
Annex A - Explanatory Material
Annex B - Additional Explanatory Notes
Annex C - Sample Ordinance Adopting NFPA 99
Annex D - Informational References
Index
Gives performance criteria for health care facilities that follow a risk-based approach, where it is the risk posed to patients and staff, not the type of building, that defines safety guidelines. Provisions govern installation, inspection, testing, maintenance, performance, and safe practices for facilities, material, equipment, and appliances - including medical gas and vacuum systems.
| DevelopmentNote |
Supersedes NFPA 99C. Also available with NFPA 99 HDBK (See NFPA 99 SET). Also available with NFPA MGHB (See NFPA 99 MGHB SET). Also available with NFPA 99 HDBK and NFPA MGHB (See NFPA 99 HDBK MGHB SET). (08/2011)
|
| DocumentType |
Standard
|
| ISBN |
978-145591680-1
|
| Pages |
247
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE 1708-2014 | IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| CSA Z275.4 :2012 | COMPETENCY STANDARD FOR DIVING, HYPERBARIC CHAMBER, AND REMOTELY OPERATED VEHICLE OPERATIONS |
| NASA STD 8719.10 : 2006 | UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS |
| NFPA 53M : 1990 | FIRE HAZARDS IN OXYGEN-ENRICHED ATMOSPHERES |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| ASTM D 6436 : 2014 : REDLINE | Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
| UNE-EN 16081:2012 | Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing |
| ASTM F 1266 : 1989 : R2002 | Standard Performance Specification for Cerebral Stereotactic Instruments |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| NFPA 418 : 2016 | HELIPORTS |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| UNI EN ISO 9170-1 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| DIN EN 14931:2006-08 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
| ASHRAE/ASHE 170 SPANISH : 2008 | VENTILATION OF HEALTH CARE FACILITIES |
| NFPA 58:2024 | Liquefied Petroleum Gas Code |
| NACE 02203 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| 04/30088537 DC : DRAFT SEP 2004 | PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| BS EN 14931:2006 | Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing |
| NFPA 43C : 1986 | STORAGE OF GASEOUS OXIDIZING MATERIALS |
| 10/30234293 DC : 0 | BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| UNI EN 16081 : 2014 | HYPERBARIC CHAMBERS - SPECIFIC REQUIREMENTS FOR FIRE EXTINGUISHING SYSTEMS - PERFORMANCE, INSTALLATION AND TESTING |
| 04/30057165 DC : 0 | BS EN 14931 - PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBERS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| CSA Z275.1 : 2016 | HYPERBARIC FACILITIES |
| NFPA 50 : 2001 | BULK OXYGEN SYSTEMS AT CONSUMER SITES |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
| NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| AAMI/IEC TIR80001-2-5:2014 | APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 2-5: APPLICATION GUIDANCE - GUIDANCE ON DISTRIBUTED ALARM SYSTEMS |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN 12110:2014-10 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| NFPA 101B : 2002 | MEANS OF EGRESS FOR BUILDINGS AND STRUCTURES |
| ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
| NFPA 1 : 2021 | FIRE CODE |
| I.S. EN 12110:2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| ASHRAE PRINCIPLES OF HVAC : 2017 | PRINCIPLES OF HEATING, VENTILATING AND AIR-CONDITIONING |
| UFC 3-540-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - ENGINE-DRIVEN GENERATOR SYSTEMS FOR PRIME AND STANDBY POWER APPLICATIONS |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| NEMA ICS 10.2 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT |
| UFC 3-575-01 : 2012 | UNIFIED FACILITIES CRITERIA - LIGHTNING AND STATIC ELECTRICITY PROTECTION SYSTEMS |
| NEMA ICS 10.1 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT |
| UNI EN ISO 9170-2 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
| AEP-42 : 2006 | GUIDE TO USE OF MATERIALS IN OXYGEN-ENRICHED ENVIRONMENTS |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| AAMI TIR 11 : 2005 | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| BS EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| SAE ARP 1398 : 2016 | TESTING OF OXYGEN EQUIPMENT |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. EN ISO 9170-2:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| NASA STD 3000 VOL 2 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2 |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
| ICC IEBC CODE AND COMMENTARY : 2015 | IEBC® Code and Commentary |
| ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
| CSA Z8000 : 2011 : R2016 | CANADIAN HEALTH CARE FACILITIES |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| CSA Z8000 : 2011 | CANADIAN HEALTH CARE FACILITIES |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| CSA Z8000 : 2011 : INC : UPD 1 : 2013 | CANADIAN HEALTH CARE FACILITIES |
| ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| EN ISO 7396-2:2007 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| UNI EN ISO 7396-2 : 2007 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| UNI EN 12110 : 2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| I.S. EN ISO 9170-1:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ASTM F 1266 : 1989 : R2008 | Standard Performance Specification for Cerebral Stereotactic Instruments (Withdrawn 2017) |
| KKK-T-683 Revision F:2010 | TRUCKS, HAND, TWO-WHEELED |
| I.S. EN ISO 7396-2:2007 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| A-A-52047 Revision D:2013 | Tubing, Nonmetallic (Rubber and Plastic) |
| UFC 3-420-02FA : Change 1 | UNIFIED FACILITIES CRITERIA - COMPRESSED AIR |
| CSA Z275.4 : 2012 : INC : UPD 1 : 2012 | COMPETENCY STANDARD FOR DIVING, HYPERBARIC CHAMBER, AND REMOTELY OPERATED VEHICLE OPERATIONS |
| CSA Z32 : 2015 | ELECTRICAL SAFETY AND ESSENTIAL ELECTRICAL SYSTEMS IN HEALTH CARE FACILITIES |
| BS EN 16081 : 2011 | HYPERBARIC CHAMBERS - SPECIFIC REQUIREMENTS FOR FIRE EXTINGUISHING SYSTEMS - PERFORMANCE, INSTALLATION AND TESTING |
| AAGSP-11 : 2017 | GUIDE OF LUBRICANTS FOR USE IN OXYGEN SYSTEMS AND USE OF MATERIALS IN OXYGEN RICH ENVIRONMENTS |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| NFPA 97 : 2003 | GLOSSARY OF TERMS RELATING TO CHIMNEYS, VENTS, AND HEAT-PRODUCING APPLIANCES |
| CSA C22.2 No. 178.1 : 2014 | TRANSFER SWITCH EQUIPMENT |
| ASTM F 2319 : 2004 | Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) |
| IEEE DRAFT 602 : D2 2006 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| DIN EN ISO 9170-1:2016-09 (Draft) | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| I.S. EN 16081:2011 | HYPERBARIC CHAMBERS - SPECIFIC REQUIREMENTS FOR FIRE EXTINGUISHING SYSTEMS - PERFORMANCE, INSTALLATION AND TESTING |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 9170-2:2008 | Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
| PD IEC/TR 80001-2-5:2014 | Application of risk management for IT-networks incorporating medical devices Application guidance. Guidance on distributed alarm systems |
| AAMI TIR11:2005(R2015) | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| IEC TR 80001-2-5:2014 | Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| UL 1008A:2ED 2017-09-05 | Transfer Switch Equipment, Over 1000 Volts |
| CSA C22.2 NO. 178.3:17 | Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A) |
| EN 16081:2011+A1:2013 | Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing |
| EN 14931:2006 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
| ASHRAE/ASHE 170 : 2017 | VENTILATION OF HEALTH CARE FACILITIES |
| 16/30314880 DC : 0 | BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| ASTM F 1266 : 1989 : R1998 | Standard Performance Specification for Cerebral Stereotactic Instruments |
| DIN EN ISO 9170-2:2009-09 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DIN EN 16081:2014-04 | HYPERBARIC CHAMBERS - SPECIFIC REQUIREMENTS FOR FIRE EXTINGUISHING SYSTEMS - PERFORMANCE, INSTALLATION AND TESTING |
| ASTM G 128/G128M : 2015 : REDLINE | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
| BS EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum |
| I.S. EN 14931:2006 | PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBER SYSTEMS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| CSA Z305.12 : 2006 | SAFE STORAGE, HANDLING, AND USE OF PORTABLE OXYGEN SYSTEMS IN RESIDENTIAL BUILDINGS AND HEALTH-CARE FACILITIES |
| NFPA 30 FRENCH : 1996 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ASTM F 1343 : 2002 | Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems (Withdrawn 2011) |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| ASHRAE 90.4 : 2016 | ENERGY STANDARD FOR DATA CENTERS |
| NFPA 1 : 2018 | FIRE CODE |
| DIN EN ISO 7396-2:2007-07 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
| BS EN ISO 7396-2:2007 | Medical gas pipeline systems Anaesthetic gas scavenging disposal systems |
| ISO 7396-2:2007 | Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems |
| AAMI SP10 : 2002 | MANUAL, ELECTRONIC, OR AUTOMATED SPHYGMOMANOMETERS |
| DIN EN 12110:2003-05 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements |
| CSA Z9170.1 : 2011 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| NFPA 400 : 2019 | Hazardous Materials Code |
| NFPA 58:2020 | Liquefied Petroleum Gas Code. |
| PIP PHSMV036 : 2017 | HYGIENIC BRONZE - BALL VALVE DESCRIPTIONS |
| ICC IPC International Plumbing Code : 2021 | International Plumbing Code |
| ASME A18.1 : 2017 | SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
| CSA Z9170.1 : 2011 : R2015 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| PIP PHSMV035 : 2017 | HYGIENIC BRONZE CHECK VALVE DESCRIPTIONS |
| ICC IEBC International Existing Building Code:2021 | International Existing Building Code |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| UL 1685:4ED 2015-07-07 | Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| AWS B2.2/B2.2M : 2010 | SPECIFICATION FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| ANSI/AAMI/IEC 80001-1:2010 | APPLICATION OF RISK MANAGEMENT FOR IT NETWORKS INCORPORATING MEDICAL DEVICES - PART 1: ROLES, RESPONSIBILITIES AND ACTIVITIES |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| NFPA 551 : 2016 | EVALUATION OF FIRE RISK ASSESSMENTS |
| CGA O2 DIR : 2000 | 2000 DIRECTORY OF CLEANING AGENTS FOR OXYGEN SERVICE |
| ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
| CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
| CGA G 6.1 : 2013 | STANDARD FOR INSULATED CARBON DIOXIDE SYSTEMS AT CONSUMER SITES |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASHRAE GUIDELINE 0 : 2013 | THE COMMISSIONING PROCESS |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| TIA/EIA 568 SET : C2009 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD SET |
| IEC TR 80001-2-5:2014 | Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| CGA G 6.5 : 2013 | STANDARD FOR SMALL STATIONARY INSULATED CARBON DIOXIDE SUPPLY SYSTEM |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| NFPA 853 : 2010 | INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
| ASTM G 72/G72M : 2015 : REDLINE | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| NFPA 325 : 1994 | FIRE HAZARD PROPERTIES OF FLAMMABLE LIQUIDS, GASES, AND VOLATILE SOLIDS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| IEC/ISO 31010:2009 | Risk management - Risk assessment techniques |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| ASHRAE 90.1 : 1999 | ENERGY STANDARD FOR BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| ASME B31.3:2016 | PROCESS PIPING |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| NFPA 730 : 2018 | GUIDE FOR PREMISES SECURITY |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| CGA P 18 : 2013 | STANDARD FOR BULK INERT GAS SYSTEMS |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME B40.100 : 2013 | Pressure Gauges and Gauge Attachments (B40.100 - 2013) |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| CGA P2-7 : 2011 | GUIDE FOR THE SAFE STORAGE, HANDLING, AND USE OF SMALL PORTABLE LIQUID OXYGEN SYSTEMS IN HEALTH CARE FACILITIES |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| TIA 569 : D2015 AMD 1 2016 | TELECOMMUNICATIONS PATHWAYS AND SPACES |
| NFPA 1600 : 2016 | DISASTER/EMERGENCY MANAGEMENT AND BUSINESS CONTINUITY/CONTINUITY OF OPERATIONS PROGRAMS |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| ASTM D 2672 : 2014 : REDLINE | Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
| ASHRAE/ASHE 170 : 2013 | VENTILATION OF HEALTH CARE FACILITIES |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ASSE SERIES 6000 : 2015 | PROFESSIONAL QUALIFICATIONS STANDARD FOR MEDICAL GAS SYSTEMS PERSONNEL |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| CGA G 4 : 2015 | OXYGEN |
| ASME A17.3 : 2015 | SAFETY CODE FOR EXISTING ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELECTRIC AND HYDRAULIC ELEVATORS AND ESCALATORS |
| ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| SEMI S10 : 2015E | SAFETY GUIDELINE FOR RISK ASSESSMENT AND RISK EVALUATION PROCESS |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| TIA/EIA 606 : B2012 ADD 1 2015 | ADMINISTRATION STANDARD FOR TELECOMMUNICATIONS INFRASTRUCTURE |
| ASTM D 2466 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| NFPA 260 : 2013 | STANDARD METHODS OF TESTS AND CLASSIFICATION SYSTEM FOR CIGARETTE IGNITION RESISTANCE OF COMPONENTS OF UPHOLSTERED FURNITURE |
| ANSI Z136.3 : 2011 | SAFE USE OF LASERS IN HEALTH CARE |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CGA P 50 : 2014 | SITE SECURITY STANDARD |
| ASTM B 828 : 2016 : REDLINE | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| CGA P2-5 : 2011 | TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION |
| NFPA 261 : 2013 | TEST FOR DETERMINING RESISTANCE OF MOCK-UP UPHOLSTERED FURNITURE MATERIAL ASSEMBLIES TO IGNITION BY SMOLDERING CIGARETTES |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| ISA 7.0.01 : 1996 | QUALITY STANDARD FOR INSTRUMENT AIR |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| ASHRAE GUIDELINE 1-1 : 2007 | HVAC&R TECHNICAL REQUIREMENTS FOR THE COMMISSIONING PROCESS |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
| ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
| NFPA 1670 : 2017 | OPERATIONS AND TRAINING FOR TECHNICAL SEARCH AND RESCUE INCIDENTS |
| ASTM D 4359 : 1990 | TEST METHOD FOR DETERMINING WHETHER A MATERIAL IS A LIQUID OR A SOLID |
| IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| IEC 60601-1-1:2000 | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
| CGA P2-6 : 2011 | TRANSFILLING OF LIQUID OXYGEN USED FOR RESPIRATION |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
| NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
| CGA G 8.1 : 2013 | STANDARD FOR NITROUS OXIDE SYSTEMS AT CUSTOMER SITES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.