NF EN 61310-2 : 2008
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
12-01-2013
AVANT-PROPOS
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Marquage d'identification et de sécurité
4.1 Généralités
4.2 Marquage de la machine dans son ensemble
4.3 Marquage destiné à la sécurité d'utilisation
5 Utilisation des marquages
5.1 Généralités
5.2 Représentation des valeurs assignées
6 Marquage des liaisons
6.1 Généralités
6.2 Liaisons mécaniques
6.3 Liaisons des systèmes à énergie fluide
6.4 Liaisons électriques
7 Durabilité des marquages et de leurs fixations
Annexe A (informative) Symboles graphiques et signaux
de sécurité
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Annexe ZZ (informative) Couverture des Exigences
Essentielles des Directives CE
Bibliographie
Gives general rules on marking for identification of machinery, for the avoidance of hazards arising from incorrect connections, and for safe use related to mechanical and electrical hazards.
| DevelopmentNote |
Indice de classement: C79-142. PR NF EN 61310-2 February 2006. (02/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 61310-2 : 2008 | Identical |
| DIN EN 61310-2:2008-09 | Identical |
| NEN EN 61310-2 : 1996 | Identical |
| SN EN 61310-2 : 2008 | Identical |
| UNE-EN 61310-2:2008 | Identical |
| EN 61310-2:2008 | Identical |
| IEC 61310-2:2007 | Identical |
| BS EN 61310-2:2008 | Identical |
| I.S. EN 61310-2:2008 | Identical |
| NF EN 15094 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| NF EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| NF EN 61310-3 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS |
| NF EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| NF EN 15339-2 : 2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| XP CEN/TS 13778 : 2005 XP | MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS |
| NF EN 15061 : 2007 + A1 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| NF EN 15093 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| NF EN 692 : 2006 + A1 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| NF EN ISO 12100-1 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| NF EN 60027-3 : 2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 3: LOGARITHMIC AND RELATED QUANTITIES AND THEIR UNITS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| NF EN 60027-2 : 2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
| NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| FD ISO 7000 : 2004 FD | SYMBOLES GRAPHIQUES UTILISABLES SUR LE MATERIEL - INDEX ET TABLEAU SYNOPTIQUE |
| NF EN 61310-1 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS |
| IEC 60027-3:2002 | Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| UTEC 03 004 : 1986 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - SYMBOLS FOR QUANTITIES TO BE USED FOR ROTATING MACHINES |
| NF EN 60079-0 : 2013 AMD 11 2014 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| NF EN 60027-1 : 2007 AMD 2 2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
| NFX 08 003-3 : 2006 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND VISUAL SAFETY SIGNS - PART 3: STANDARDIZED VISUAL SAFETY SIGNS |
| NF EN ISO 12100-2 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.