Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF EN 61048 : 2006 AMD 1 2016

Current

Current

The latest, up-to-date edition.

AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS

Published date

12-01-2013

Sorry this product is not available in your region.

AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Prescriptions générales
5 Généralités sur les essais
6 Marquage
   6.1 Marquage obligatoire
   6.2 Informations supplémentaires
   6.3 Durabilité et lisibilité du marquage
7 Moyens de raccordement
8 Lignes de fuite et distances dans l'air
9 Tension assignée
10 Fusibles
11 Résistances de décharge
12 Ordre des essais
13 Essai de scellement et d'échauffement
   13.1 Essai de scellement et d'échauffement pour les
        condensateurs de type A
   13.2 Essai de scellement et d'échauffement pour les
        condensateurs de type B
14 Essai sous tension élevée
   14.1 Essai sous tension élevée entre bornes
   14.2 Essai sous tension élevée entre bornes et boîtier
15 Résistance aux conditions de fonctionnement
   défavorables
   15.1 Essai à l'humidité sous tension
   15.2 Essai en courant (décharge)
16 Résistance à la chaleur, au feu et au cheminement
   16.3 Essai de cheminement
17 Essai d'autorégénération
18 Essai de destruction
   18.1 Essai A
   18.2 Essai B
   18.3 Condensateurs non autorégénérateurs
Annexe A (normative) Tension d'essai
Annexe B (normative) Réglage de la température de
          l'enceinte d'essai
Annexe C (normative) Essai de conformité de production
Annexe D (informative) Guide de calcul des réglages de
          l'équipement pour les essais des paragraphes
          15.2 et 18.1.3
Annexe ZA (normative) Références normatives à d'autres
          publications internationales avec les
          publications européennes correspondantes
Bibliographie

States the requirements for self-healing and non-self-healing continuously rated a.c. capacitors (having a rated voltage not exceeding 1,000 V) that are meant for use in discharge lamp circuits operating at 50 Hz or 60 Hz and at altitudes up to 3,000 m. Covers capacitors meant for connection in shunt or in series with the lamp circuit or an effective combination of these. Does not cover radio- interference suppressor capacitors.

DevelopmentNote
Supersedes NFC 71 215 PR NF EN 61048 November 2001. (11/2001) Indice de classement: C71-242 Supersedes NFC 71 242 (05/2005)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current
Supersedes

Standards Relationship
UNE-EN 61048:2007 Identical
EN 61048:2006/A1:2016 Identical
IEC 61048:2006+AMD1:2015 CSV Identical
I.S. EN 61048:2006 Identical
DIN EN 61048 : 2016 Identical
NBN EN 61048 : 2006 AMD 1 2016 Identical
BS EN 61048 : 2006 Identical

NF EN 60931-1 : 97 AMD 1 2003 SHUNT POWER CAPACITORS OF THE NON-SELF HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
NF EN 60831-1 : 2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION

NF EN 61049 : 1993 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
IEC 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
NF EN 60598-1 : 2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
NF EN 60695-11-5 : 2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
ISO 4046-4:2002 Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
NF EN 60695-2-11 : 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more