NF EN 1401-1 : 2009
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
01-10-2021
12-01-2013
Avant-propos
1 Domaine d'application
2 Références normatives
3 Termes, définitions, symboles et abréviations
3.1 Termes et définitions
3.2 Symboles
3.3 Abréviations
4 Matière
4.1 Matière de base
4.2 Matière du tube
4.3 Matière du raccord
4.4 Utilisation de matière non vierge
4.5 Conditions et moyens de retenue des bagues d'étanchéité
5 Caractéristiques générales
5.1 Aspect
5.2 Couleur
6 Caractéristiques géométriques
6.1 Généralités
6.2 Dimensions des tubes
6.3 Dimensions des raccords
6.4 Dimensions des emboîtures et des bouts mâles
6.5 Types de raccords
7 Caractéristiques mécaniques
7.1 Caractéristiques mécaniques des tubes
7.2 Caractéristiques mécaniques des raccords
8 Caractéristiques physiques
8.1 Caractéristiques physiques des tubes
8.2 Caractéristiques physiques des raccords
9 Exigences de performances
10 Bagues d'étanchéité
11 Colles
12 Marquage
12.1 Généralités
12.2 Marquage minimum exigé pour les tubes
12.3 Marquage minimum exigé pour les raccords
12.4 Marquage supplémentaire
Annexe A (normative) Utilisation de matière non vierge
A.1 Définitions de la matière
A.2 Matière rebroyée interne
A.3 Matières rebroyées externes et régénérées avec une
spécification agréée
A.4 Matières rebroyées externes et régénérées non couvertes
par une spécification agréée
A.5 Résumé de l'utilisation de matière non vierge
Annexe B (informative) Caractéristiques générales des tubes et
raccords en PVC-U
B.1 Généralités
B.2 Caractéristiques du compound
B.3 Rigidité annulaire
B.4 Taux de fluage
B.5 Résistance chimique
B.6 Résistance à l'abrasion
B.7 Rugosité hydraulique
B.8 Déflexion diamétrale
Annexe C (informative) Normes de produits
Bibliographie
Defines the requirements for pipes, fittings and the system of unplasticized poly (vinyl chloride) (PVC-U) piping systems in the field of non-pressure underground drainage and sewerage outside the building structure (application area code "U"), and both buried in ground within the building structure (application area code "D") and outside the building.
| DevelopmentNote |
Indice de classement: P16-352-1. Supersedes NFP 16 352. (01/2003) PR NF EN 1401-1 May 2006. (05/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 1401-1:2009 | Identical |
| ONORM EN 1401-1 : 2009 | Identical |
| UNI EN 1401-1 : 2009 | Identical |
| EN 1401-1:2009 | Identical |
| UNE-EN 1401-1:2009 | Identical |
| SN EN 1401-1 : 2009 | Identical |
| I.S. EN 1401-1:2009 | Identical |
| NS EN 1401-1 : 2009 | Identical |
| NEN EN 1401-1 : 2009 | Identical |
| DIN EN 1401-1:2009-07 | Identical |
| NBN EN 1401-1 : 2009 | Identical |
| NF EN 13476-3 : 2007 + A1 2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INSIDE AND PROFILED OUTSIDE SURFACE, TYPE B |
| NF EN 13476-2 : 2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INSIDE AND OUTSIDE SURFACE, TYPE A |
| NFP 16 362 : 2006 XP | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES WITH STRUCTURED-WALLS AND SMOOTH SURFACED INNER AND OUTER LAYERS AND THEIR JOINTS - SPECIFICATIONS |
| NF EN 1053 : 1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE APPLICATIONS - TEST METHOD FOR WATERTIGHTNESS |
| NF EN ISO 9969 : 2016 | THERMOPLASTICS PIPES - DETERMINATION OF RING STIFFNESS |
| NF EN 1411 : 1996 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO EXTERNAL BLOWS BY THE STAIRCASE METHOD |
| NF EN 922 : 1995 | PLASTICS PIPING AND DUCTING SYSTEMS - PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE |
| NF EN 1055 : 1996 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE INSIDE BUILDINGS - TEST METHOD FOR RESISTANCE TO ELEVATED TEMPERATURE CYCLING |
| NF EN 580 : 2003 | PLASTICS PIPING SYSTEMS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES - TEST METHOD FOR THE RESISTANCE TO DICHLOROMETHANE AT A SPECIFIED TEMPERATURE (DCMT) |
| NF EN ISO 2505 : 2005 | THERMOPLASTICS PIPES - LONGITUDINAL REVERSION - TEST METHOD AND PARAMETERS |
| NF EN 10204 : 2005 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| NF EN 744 : 1995 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - TEST METHOD FOR RESISTANCE TO EXTERNAL BLOWS BY THE ROUND-THE-CLOCK METHOD |
| NF EN 1277 : 2004 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPING SYSTEMS FOR BURIED NON-PRESSURE APPLICATIONS - TEST METHODS FOR LEAKTIGHTNESS OF ELASTOMERIC SEALING RING TYPE JOINTS |
| NF EN ISO 3126 : 2005 | PLASTICS PIPING SYSTEMS - PLASTICS COMPONENTS - MEASUREMENT OF DIMENSIONS |
| NF EN 1905 : 1999 | PLASTICS PIPING SYSTEMS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES, FITTINGS AND MATERIAL - METHOD FOR ASSESSMENT OF THE PVC CONTENT BASED ON TOTAL CHLORINE CONTENT |
| NF EN ISO 580 : 2005 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION-MOULDED THERMOPLASTICS FITTINGS - METHODS FOR VISUALLY ASSESSING THE EFFECTS OF HEATING |
| NF EN ISO 1167-1 : 2006 | THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE - PART 1: GENERAL METHOD |
| NF EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER AND TITRATION METHOD |
| NF EN 12061 : 1999 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHODS FOR IMPACT STRENGTH |
| NF EN 12256 : 1998 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS |
| NF EN ISO 1043-1 : 2012 AMD 1 2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| NF EN ISO 472 : 2013 | PLASTICS - VOCABULARY |
| NF EN 727 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES AND FITTINGS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) |
| NF EN 681-1 : 1996 AMD 3 2005 | ELECTROMETRIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| NF EN 681-2 : 2000 AMD 2 2005 | ELECTROMETRIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.