NF EN 12952-8 : 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 8: REQUIREMENTS FOR FIRING SYSTEMS FOR LIQUID AND GASEOUS FUELS FOR THE BOILER
17-01-2023
12-01-2013
Avant-propos
1 Domaine d'application
1.1 Équipements de chauffe
1.2 Combustibles
1.3 Exploitation
2 Références normatives
3 Termes et définitions
4 Alimentation en combustible
4.1 Généralités
4.2 Transfert et préparation du combustible
4.3 Tuyauteries de combustible
4.4 Dispositifs de sectionnement de sécurité (robinet
d'arrêt d'urgence de sécurité)
5 Équipement d'alimentation en air et balayage des gaz de
combustion
5.1 Alimentation en air
5.2 Rapport air/combustible
5.3 Balayage des gaz de combustion
6 Équipement de chauffe
6.1 Brûleurs
6.2 Recirculation des gaz de combustion
6.3 Régulation et controle
6.4 Équipement électrique
6.5 Précautions de sécurité
6.6 Cheminée commune à plusieurs équipements de chauffe
7 Manuel d'exploitation
8 Exigences spéciales pour les équipements de chauffe
brûlant des combustibles gazeux à densité relative élevée
8.1 Équipements de chauffe principaux
8.2 Systèmes d'allumage des brûleurs
Annexe A (normative) Chaudière de récupération chimique
(chaudière à liqueur noire)
Annexe B (informative) Prescriptions d'exploitation pour
les équipements de chauffe pour
combustibles liquides et gazeux avec
surveillance permanente
Annexe ZA (informative) Articles de la présente Norme
européenne concernant les exigences
essentielles ou d'autres dispositions
de la Directive "Équipements sous
pression"
Bibliographie
Gives requirements, for oil and gas firing systems of steam boilers and hot water generators as defined in EN 12952-1.
| DevelopmentNote |
Indice de classement: E32-110-8. (12/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 12952-8:2003 | Identical |
| UNI EN 12952-8 : 2004 | Identical |
| BS EN 12952-8:2002 | Identical |
| NS EN 12952-8 : 1ED 2002 | Identical |
| SN EN 12952-8 : 2002 | Identical |
| I.S. EN 12952-8:2002 | Identical |
| NBN EN 12952-8 : 2002 | Identical |
| DIN EN 12952-8:2002-08 | Identical |
| NEN EN 12952-8 : 2002 | Identical |
| ONORM EN 12952-8 : 2002 | Identical |
| EN 12952-8:2002 | Identical |
| NF EN 12952-9 : 2003 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 9: REQUIREMENTS FOR FIRING SYSTEMS FOR PULVERIZED SOLID FUEL FOR THE BOILER |
| NF EN 12952-16 : 2003 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 16: REQUIREMENTS FOR FLUIDIZED BED AND GRATE FIRING SYSTEMS FOR SOLID FUELS FOR THE BOILER |
| NFE 03 005 : 81 CORR 97 | PIPE ("GAS") THREADS WHERE PRESSURE TIGHT JOINTS ARE NOT MADE ON THE THREADS - EXTERNAL AND INTERNAL SCREW THREADS |
| NF EN ISO 3677 : 1995 | |
| NF EN 751-1 : 1997 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 1: ANAEROBIC JOINTING COMPOUNDS |
| NFE 03 163 : 1982 | CHECKING OF PARALLEL PIPE THREADS WITH LIMIT GAUGES - THREADED GAUGES FOR NUTS |
| NF EN 751-2 : 1997 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 2: NON-HARDENING JOINTING COMPOUNDS |
| NF EN 50156-1 : 2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| NF EN 1044 : 1999 | BRAZING - FILLER METALS |
| NF EN 287-1 : 2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| NFE 03 165 : 1984 | CHECKING OF PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS WITH LIMIT GAUGES (ACCORDING TO NF E 03-004) |
| NF EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| NFE 03 164 : 1986 | PIPE THREADS - CHECKING OF PARALLEL PIPE THREADS WITH LIMIT GAUGES - PLAIN GAUGES FOR EXTERNAL AND INTERNAL SCREW THREADS |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| NF EN 751-3 : 1997 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 3: UNSINTERED PTFE TAPES |
| NFE 03 004 : 81 CORR 97 | PIPE ("GAS") THREADS WHERE PRESSURE - TIGHT JOINTS ARE MADE ON THE THREADS - TAPER MALE THREAD AND PARALLEL FEMALE THREAD |
| NFE 03 161 : 1982 | CHECKING OF PARALLEL PIPE THREADS WITH LIMIT GAUGES - INTRODUCTION |
| NFE 03 162 : 1982 | PIPE (<< GAS >>) THREADS - VERIFICATION OF PARALLEL THREADS WITH LIMIT GAUGES - EXTERNAL THREAD SCREW GAUGES |
| NF EN 161 : 2011 + A3 2013 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| NF EN 12952-1 : 2015 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 1: GENERAL |
| NF EN 264 : 1991 | SAFETY SHUT-OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.