MIL-STD-790 Revision G:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
Available format(s)
PDF
Superseded date
18-05-2021
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - SELF-ASSESSMENT SYSTEM
APPENDIX B - ESTABLISHMENT OF TECHNOLOGY
REVIEW BOARDS (TRBs)
Ascertains direct reference in established reliability and high reliability electrical, electronic, and fiber optic parts specifications and establishes the criteria for a manufacturer's qualified product system.
| Committee |
AREA 59GP
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DSCC 06003 : C | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2 WATT), STYLE 4527 |
| DSCC 94016 : L | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1206 |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| DSCC 93026 : V | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG) |
| DSCC 09008 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), RADIAL LEADED, 0.1 WATT (RBR81) |
| MIL-PRF-32140 Base Document:2004 | RELAYS, ELECTROMAGNETIC, RADIO FREQUENCY, ESTABLISHED RELIABILITY, - GENERAL SPECIFICATION FOR |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 27599 : B | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR |
| DSCC 04009 : E | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0603 |
| MIL C 83513 : C | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| DSCC 88033 : G#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 1010 |
| DSCC 03011 : B | RESISTOR, FIXED, FILM, CHIP, ZERO-OHM, STYLE 0201 |
| DSCC 12011 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1010 |
| MIL-PRF-32535 Revision A:2017 | Capacitor, Chip, Fixed, Ceramic Dielectric (Temperature Stable and General Purpose), Extended Range, High Reliability and Standard Reliability, General Specification for |
| DSCC 94048 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 1/2 WATT, STYLE 2010 |
| DSCC 95006 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 1 WATT, STYLE 2512 |
| MIL C 31031 : 0 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR |
| DSCC 03013 : D | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 0603 |
| MIL-R-39008 Revision C:1990 | RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| DSCC 14007 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.25 WATT (RBR54) |
| DSCC 88008 : C | RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 0505 |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| DOD 4120.3M : 1993 | DEFENSE STANDARDIZATION PROGRAM (DSP) POLICIES AND PROCEDURES OFFICE OF THE ASSISTANT SECRETARY OF DEFENSE PRODUCTION AND LOGISTICS |
| MIL C 39003 : H | CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 01002 : G | RESISTOR, FIXED, FILM, CHIP, 1.5 WATT (MELF), FLAT CERAMIC PACKAGE, STYLE 2512 |
| MIL D 83531 : A (3) | DELAY LINES, PASSIVE |
| MIL C 55681 : D SUPP 1 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED UNENCAPSULATED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-PRF-83531 Revision D:2014 | DELAY LINES, PASSIVE, GENERAL SPECIFICATION FOR |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-PRF-39009 Revision E:2004 | RESISTOR, FIXED, WIREWOUND, (POWER TYPE, CHASSIS MOUNTED), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 13018 : A | OSCILLATOR, CRYSTAL CONTROLLED, 3.3 VOLT, ENABLE/TRI-STATE, 32.768 KHZ TO 160 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
| DSCC 07025 : C | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 1206 |
| DSCC 03014 : C | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 0402 |
| DSCC 90048 : G | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 0705 |
| DSCC 95011 : G | RESISTOR, FIXED, FILM, CHIP (MELF), 1/8 WATT, STYLE 1206 |
| DSCC 93078 : D#INA | RESISTORS, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2110 |
| DSCC 10006 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 1 WATT |
| DSCC 10007 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 3 WATT |
| DSCC 03027 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 2512 |
| DSCC 06009 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.25 WATT), STYLE 1206 |
| DSCC 13017F:2023 | |
| DSCC 10004J:2023 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG) |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-PRF-914 Revision C:2008 | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR |
| MIL-PRF-31031 Revision C:2014 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR |
| MIL-PRF-32159 Base Document:2004 | Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-PRF-39017 Revision G:2006 | RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-55681 Revision G:2016 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-49467 Revision C:2005 | Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For |
| MIL-PRF-55342 Revision H:2003 | RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-3098 Revision L:2017 | CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR |
| MIL-PRF-49291 Revision D:2013 | FIBER, OPTICAL, (METRIC) GENERAL SPECIFICATION FOR |
| MIL-PRF-87164 Revision A:1999 | CAPACITORS, FIXED, MICA DIELECTRIC, HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 87075 : F | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, DOUBLE TAB, HIGH POWER 10 WATTS |
| DSCC 12013 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0302 |
| DSCC 15003 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.15 WATT (RBR55) |
| DSCC 10004 : G | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG) |
| DSCC 98021 : B | RESISTORS, FIXED, FILM (INSULATED), 1/2 WATT |
| DSCC 03012 : B | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 0302 |
| MIL-C-85049 Revision A:1990 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| DSCC 97004 : C | RESISTOR, FIXED, FILM, (INSULATED), 2 WATT |
| DSCC 98022 : B | RESISTORS, FIXED, FILM (INSULATED), 1 WATT |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| DSCC 12012 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0402 |
| DSCC 88009 : F | RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 1050 |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| DSCC 87126 : J | RESISTOR, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE, LEAD SCREW ACTUATED) |
| DSCC 88027 : E#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 0504 |
| MIL-PRF-55182 Revision J:2017 | RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| DSCC 07010 : D | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0201 |
| MIL-PRF-28861 Revision E:2016 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| DSCC 03022 : C | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0603 |
| MIL-DTL-83526 Revision D:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
| DSCC 10010 : A | RESISTOR, CURRENT SENSE, OPEN AIR, METAL ALLOY STRIP, 5 WATTS |
| DSCC 02008 : B#IINA | RESISTOR, CHIP, FIXED, FILM, LOW AND HIGH VALUES, STYLE 1206 |
| DSCC 06021 : D | RESISTOR, FIXED, BULK METAL FOIL, HIGH PRECISION, SURFACE MOUNT, MOLDED 0.6/.4 WATTS |
| DSCC 09004 : 0 | RESISTOR, CHIP, FIXED, FILM, PRECISION, TOP CONTACT, STYLE 2020 |
| DSCC 12010 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2512 |
| DSCC 11007 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 1206 |
| DSCC 10008 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 5 WATT |
| DSCC 01032 : C | RESISTOR, CHIP, FIXED, FILM, BERYLLIA SUBSTRATE, HIGH POWER, STYLE 1206 |
| DSCC 06001 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2010 |
| DSCC 95014 : C#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 0402 |
| DSCC 05013 : B | OSCILLATOR, CRYSTAL CONTROLLED, 3.3 VOLT, ENABLE/TRI-STATE, 312 KHZ TO 170 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
| DSCC 99011 : B | RESISTORS, FIXED, FILM (INSULATED), 1/4 WATT |
| DSCC 87017 : K#INA | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 20 PIN, LEADLESS CHIP CARRIER |
| DSCC 97008 : C#CAN | RESISTOR, FIXED, FILM, CHIP (MELF), 1/4 WATT, STYLE 0204 |
| DSCC 01033 : B | RESISTOR, FIXED, FILM, CHIP, VOLTAGE DIVIDER, STYLE 1206 |
| DSCC 06006 : B | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (3 WATT), STYLE 4527 |
| DSCC 04007 : D | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0302 |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MIL C 39006/28 : 1992 | CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED PLUG), 85 DEG C (VOLTAGE DERATED TO 125 DEG C), HIGH RELIABILITY, STYLE CLS79 |
| DSCC 87018 : H | RESISTOR NETWORK, 16-PIN LEADLESS CHIP CARRIER |
| DSCC 12003 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0502 |
| MIL-DTL-83538 Revision D:2006 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| DSCC 12004 : A | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0505 |
| DSCC 89039 : G | RESISTOR, FIXED, FILM, PRECISION |
| MIL-PRF-64266 Revision B:2016 | CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR |
| MIL-PRF-49464 Revision C:2009 | CAPACITOR, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 93075 : F | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1/2 WATT) |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-HDBK-338 Revision B:1998 | ELECTRONIC RELIABILITY DESIGN HANDBOOK |
| MIL C 85045 : E | CABLES, FIBER OPTICS, (METRIC), GENERAL SPECIFICATION FOR |
| DSCC 87011 : F | RESISTOR, CHIP, FIXED, FILM, ZERO OHM, STYLE 1010 |
| MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-26 Revision H:2006 | RESISTOR, FIXED, WIREWOUND (POWER TYPE), GENERAL SPECIFICATION FOR |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL C 39018 : C | CAPACITORS, FIXED, ELECTROLYTIC (ALUM. OXIDE), ESTABLISHED RELIABILITY AND NON- ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-C-39018-8 Revision B:1991 | CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), (POLARIZED), NON-ESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY, STYLES CU01 (INSULATED) AND CUR01 (INSULATED) |
| MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
| MIL R 39005 : D | RESISTOR, FIXED, WIREWOUND, (ACCURATE), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 39014 : E | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL D 83532 : A (3) SUPP 1 | DELAY LINES, ACTIVE |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| MIL C 39006 : E | CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 12014 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0201 |
| DEFSTAN 00-41/3(1993) : 1993 | RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES |
| MIL S 83734 : F | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| SAE ARP 6328 : 2016 | GUIDELINE FOR DEVELOPMENT OF COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SYSTEMS |
| DSCC 06020 : D | RESISTOR, FIXED, BULK METAL FOIL, HIGH PRECISION, SURFACE-MOUNT, MOLDED .25/.16 WATT |
| DSCC 07024 : C | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 0805 |
| DSCC 95013 : C#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 0302 |
| DSCC 89040 : D | RESISTOR, FIXED, WIRE WOUND, SURFACE MOUNT, POWER TYPE (2.5 WATTS) |
| DSCC 88034 : M | RESISTOR, FIXED, FILM, CHIP, LOW VALUES, HIGH POWER, STYLE 2512 |
| MIL-PRF-32560 Base Document:2016 | COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 87016 : N | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 20 PIN, LEADLESS CHIP CARRIER |
| DSCC 06011 : C | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (1.0 WATT), STYLE 2512 |
| DSCC 04008 : E | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0402 |
| MIL-DTL-28840 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR |
| DSCC 90049 : E | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 1005 |
| DSCC 87015 : F | RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, 28 PIN, LEADLESS CHIP CARRIER |
| DSCC 08003 : A | RESISTOR, CHIP, FIXED, CURRENT SENSING, ULTRA PRECISION, STYLE 1625 |
| DSCC 15004 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR71) |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| DSCC 05014 : B | OSCILLATOR, CRYSTAL CONTROLLED, 5 VOLT, ENABLE/TRI-STATE, 312 KHZ TO 120 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
| MIL R 55342 : C | RESISTORS, FIXED, FILM, CHIP, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 94013 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1005 |
| MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| MIL R 39015 : C (3) | RESISTOR, VARIABLE, WIRE WOUND (LEAD SCREW ACTUATED), ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 11693 : C | CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20 |
| DSCC 12005 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1005 |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| DSCC 90092 : D | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE RM1505 |
| DSCC 98020 : B | RESISTORS, FIXED, FILM (INSULATED), 1/8 WATT |
| DSCC 03016 : C | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 2512 |
| DSCC 03010 : E | RESISTOR, FIXED, FILM, CHIP, SURFACE MOUNTED, ULTRA PRECISION, STYLE 1506 |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 83421 : B | CAPACITOR, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC) HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-87217 Revision A:1999 | CAPACITORS, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, DIRECT CURRENT FOR LOW ENERGY, HIGH IMPEDANCE APPLICATIONS, HERMETICALLY SEALED IN METAL CASES, HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 94047 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 2 WATT, STYLE 3610 |
| DSCC 16001 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR75) |
| MIL-C-49468 Base Document:1990 | CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR |
| MIL R 39007 : G (3) SUPP 1A | RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| DSCC 03015 : D | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 2010 |
| DSCC 88031 : F | RESISTOR, CHIP, FIXED, FILM, .330 WATT, STYLE 1505 |
| MIL-C-83421-4 Revision A:1991 | CAPACITORS, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, DC, AC, OR DC & AC), HERMETICALLY SEALED IN METAL CASES, HIGH RELIABILITY (INSULATED) |
| DSCC 88032 : D | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE RM0502 |
| DSCC 12009 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2010 |
| MIL-PRF-28750 Revision J:2017 | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR |
| DSCC 94014 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2208 |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, Established Reliability, General Specification for |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-39001 Revision E:2009 | Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| MIL-DTL-27599 Revision E:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
| MIL C 23269 : E | CAPACITORS, FIXED, GLASS DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 55514 : C | CAPACITOR, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC AC, IN NONMETAL CASES, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 89099 : H | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS |
| DSCC 93076 : J | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1 WATT) |
| MIL C 49467 : (2) SUPP 1 | CAPACITORS, FIXED, CERAMIC, MULTILAYER, HIGH VOLTAGE (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 02001 : A | RESISTOR, FIXED, FILM, PRECISION, CHIP 1/8 WATT, STYLE 2012 |
| MIL-DTL-83733 Revision E:2006 | CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| DSCC 12007 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2208 |
| MIL-PRF-49470 Revision D:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| DOD C 83527 : 0 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR MULTIPLE INSERT TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 150 DEGREES C - TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-24623-7 Revision A:2013 | SPLICE, MECHANICAL, SIMPLEX FIBER OPTIC CABLE, AIRCRAFT |
| MIL C 49464 : A | CAPACITORS, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY |
| MIL C 123 : B | CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL O 55310 : C | OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
| MIL-PRF-123-2 Revision F:2014 | CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS06 |
| MIL W 25038 : F | WIRE, ELECTRICAL, HIGH TEMP, FIRE RESISTANT, AND FLIGHT CRITICAL, GENERAL SPECIFICATION FOR |
| MIL PRF 12883 : E | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR |
| DSCC 94018 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2512 |
| DSCC 07002 : C | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (3 WATT) |
| DSCC 04032 : C | RESISTOR, CHIP, FIXED, FILM, LOW VALUES, HIGH POWER, 1.5 WATTS, STYLE 2512 |
| DSCC 93077 : G | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (2 WATT) |
| DSCC 02010 : F | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1206 |
| SAE AS 6496 : 2014 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - AUTHORIZED/FRANCHISED DISTRIBUTION |
| DSCC 09002 : 0 | RESISTOR, FIXED, FILM, PRECISION, HIGH OHMIC VALUES |
| DSCC 93079 : D#INA | RESISTORS, FIXED, BULK METAL FOIL, CHIP, ULTRA PRECISION, STYLE 1505 |
| DSCC 06007 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.1 WATT), STYLE 0603 |
| DSCC 06012 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2.0 WATT), STYLE 2816 |
| DSCC 06010 : B | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.5 WATT), STYLE 2010 |
| MIL-PRF-23419 Revision H:2013 | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 87014 : K | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 16 PIN, LEADLESS CHIP CARRIER |
| DSCC 88016 : C | RESISTOR NETWORKS, FIXED, FILM, 20 PIN, LEADLESS CHIP CARRIER |
| MIL-C-29600 Base Document:1989 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE, CRIMP CONTACTS, ASSOCIATED HARDWARE GENERAL SPECIFICATION FOR |
| DSCC 94025 : K | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0502 |
| DSCC 94026 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1505 |
| MIL R 914 : 0 | RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| MIL R 39035 : C (2) SUPP 1 | RESISTOR, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE) ESTABLISHED RELIABILITY |
| MIL C 87164 : 0 | CAPACITOR, FIXED, MICA DIELECTRIC, HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 12006 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1505 |
| MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| DSCC 15002 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.33 WATT (RBR53) |
| DSCC 94017 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2010 |
| DSCC 88018 : F | RESISTOR, CHIP, FIXED, FILM, .200 WATT, STYLE 0705 |
| MIL C 83517 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE, GENERAL SPECIFICATION FOR |
| MIL C 83527 : A | |
| DSCC 93030 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2018 |
| MIL R 39009 : C (3) SUPP 1 | RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED) ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 87026 : P | RESISTOR NETWORK, FIXED, FILM, 3-PIN |
| DSCC 05009 : B | RESISTOR, FIXED, FILM, CHIP (MELF), 1/4 WATT, STYLE 0204 |
| MIL-DTL-83734 Revision H:2007 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL C 39022 : E | CAPACITOR, FIXED, METALLIZED PAPER, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC DIRECT AND ALTERNATING CURRENT, HERMETICALLY SEALED IN METAL CASE) ESTABLISHED RELIABILITY, GEN. SPEC. FOR |
| MIL C 39001 : B | CAPACITOR, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR.. |
| DSCC 11008 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 2010 |
| MIL-PRF-39015 Revision E:2006 | RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 14006 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.5 WATT (RBR52) |
| DSCC 90047 : G | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE RM2208 |
| DSCC 88040 : F | RESISTOR, VARIABLE, SURFACE MOUNT, NONWIREWOUND, TRIMMER |
| MIL-PRF-39007 Revision J:2005 | Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-55310 Revision E:2006 | OSCILLATOR, CRYSTAL CONTROLLED, GENERAL SPECIFICATION FOR |
| MIL R 55182 : F | RESISTORS, FIXED, FILM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 39006/29 : 1992 | CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG) (EXTENDED RANGE), 85 DEG C (VOLTAGE DERATED TO 125 DEG C), HIGH RELIABILITY, STYLES CLS81 |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| DSCC 07009 : A | RESISTOR, CHIP, FIXED, FILM, STYLE 0201 |
| MIL-PRF-39018 Revision G:2009 | CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-R-874 Base Document:1990 | RESISTOR NETWORKS, FIXED, FILM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 88030 : G | RESISTORS, FIXED, FILM, CHIP, STYLE 1005 |
| MIL C 55365 : C (5) | CAPACITOR, CHIP, FIXED, TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL R 39017 : E (5) SUPP 1 | RESISTOR, FIXED, FILM (INSULATED) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 83522 : D | CONNECTORS, FIBER OPTIC, SINGLE TERMINUS, GENERAL SPECIFICATION FOR |
| DSCC 03002 : C | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE 0505 |
| MIL-PRF-32085 Base Document:2001 | RELAYS, ELECTROMAGNETIC, 270 V DC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 19978 : F | CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR |
| DSCC 06002 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2512 |
| MIL-PRF-123 Revision D:2005 | CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 94015 : L | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0705 |
| DSCC 11009 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 2512 |
| DSCC 13017 : D | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG) |
| DSCC 15005 : B | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG), EXTENDED CAPACITANCE |
| DSCC 96002 : C | RESISTOR, FIXED, FILM, INSULATED, LOW INDUCTANCE |
| DSCC 94011 : E | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE RM1206 |
| DSCC 14008 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR56) |
| DSCC 12008 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0705 |
| DSCC 03026 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 2010 |
| DSCC 94012 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0505 |
| DSCC 94019 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1010 |
| SAE AS 5363 : 2016 | ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR |
| DSCC 03025 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 1206 |
| DSCC 06008 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.125 WATT), STYLE 0805 |
| MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.