MIL-STD-202-108 Base Document:2015
NA
NA
Status of Standard is Unknown
Method 108, Life (at Elevated Ambient Temperature)
Amended by
Available format(s)
PDF
Language(s)
English
Published date
18-04-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Establishes the effects on electrical and mechanical characteristics of a part, resulting from exposure of the part to an elevated ambient temperature for a specified length of time, while the part is performing its operational function.
| DevelopmentNote |
NEW CHILD NOT 1 IS NOW ADDED
|
| DocumentType |
Standard
|
| Pages |
7
|
| ProductNote |
NEW CHILD NOT 1 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
This test is conducted for the purpose of determining the effects on electrical and mechanical characteristics of a part, resulting from exposure of the part to an elevated ambient temperature for a specified length of time, while the part is performing its operational function. This test method is not intended for testing parts whose life is expressed in the number of operations. Evidence of deterioration resulting from this test can at times be determined by visual examination; however, the effects may be more readily ascertained by measurements or tests prior to, during, or after exposure. Surge current, total resistance, dielectric strength, insulation resistance, and capacitance are types of measurements that would show the deleterious effects due to exposure to elevated ambient temperatures.
| 18/30373170 DC : 0 | BS EN 62668-2 - PROCESS MANAGEMENT FOR AVIONICS - COUNTERFEIT PREVENTION - PART 2: MANAGING ELECTRONIC COMPONENTS FROM NON-FRANCHISED SOURCES |
| DSCC 88033 : G#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 1010 |
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| MIL-PRF-32535 Revision A:2017 | Capacitor, Chip, Fixed, Ceramic Dielectric (Temperature Stable and General Purpose), Extended Range, High Reliability and Standard Reliability, General Specification for |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| DSCC 02005 : B | RESISTOR, VARIABLE, NONWIREWOUND (ADJUSTMENT TYPE, LEAD-SCREW ACTUATED) 1/2 INCH RECTANGULAR, 0.3 WATTS |
| MIL C 62 : F | CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR |
| MIL-PRF-39009 Revision E:2004 | RESISTOR, FIXED, WIREWOUND, (POWER TYPE, CHASSIS MOUNTED), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-914 Revision C:2008 | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR |
| MIL-PRF-32159 Base Document:2004 | Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for |
| MIL-PRF-39017 Revision G:2006 | RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-55681 Revision G:2016 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-49467 Revision C:2005 | Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For |
| MIL-PRF-55342 Revision H:2003 | RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-15733-73 Revision C:2015 | FILTERS, RADIO FREQUENCY INTERFERENCE, HERMETICALLY SEALED, STYLE FL55 |
| MIL-PRF-39006-31 Revision C:2011 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), Extended Range, +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR91 |
| MIL-PRF-55182 Revision J:2017 | RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-28861 Revision E:2016 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| DSCC 95014 : C#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 0402 |
| MIL-PRF-49464 Revision C:2009 | CAPACITOR, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-23269 Revision H:2016 | CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-49465 Revision C:2007 | RESISTOR, FIXED, METAL ELEMENT, POWER TYPE, VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR |
| MIL-PRF-83446 Revision D:2015 | COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR |
| MIL-PRF-26 Revision H:2006 | RESISTOR, FIXED, WIREWOUND (POWER TYPE), GENERAL SPECIFICATION FOR |
| MIL-PRF-15733-75 Revision A:2003 | FILTERS, RADIO FREQUENCY INTERFERENCE, HERMETICALLY SEALED, STYLE FL98 |
| MIL-PRF-22097 Revision J:2007 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| DSCC 95013 : C#INA | RESISTOR, CHIP, FIXED, FILM, STYLE 0302 |
| MIL-PRF-32560 Base Document:2016 | COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| IEC TS 62668-2:2016 | Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-PRF-15733-72 Revision D:2015 | FILTERS, RADIO FREQUENCY INTERFERENCE, HERMETICALLY SEALED, STYLE FL54 |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| MIL-C-11015 Revision F:2008 | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, Established Reliability, General Specification for |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| MIL-PRF-49470 Revision D:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| IEC PAS 62686-2:2016 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
| PD IEC/PAS 62686-2:2016 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components |
| PD IEC/TS 62668-2:2016 | Process management for avionics. Counterfeit prevention Managing electronic components from non-franchised sources |
| MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-83530 Revision C:2008 | RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR |
| MIL-PRF-15733-74 Revision C:2015 | FILTERS, RADIO FREQUENCY INTERFERENCE, HERMETICALLY SEALED, STYLE FL56 |
| MIL-PRF-39015 Revision E:2006 | RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39006-22 Revision J:2012 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR79 |
| MIL-PRF-22684 Revision F:2006 | RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR |
| MIL-PRF-15733-44 Revision F:2003 | FILTERS, RADIO FREQUENCY INTERFERENCE, STYLE FL45 |
| MIL-PRF-39007 Revision J:2005 | Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-39018 Revision G:2009 | CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-83421-1 Revision E:2016 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, STYLES CRH01, CRH02, CRH03, CRH04, CRH05, CRH06, CRH07, CRH08, CRH09, AND CRH00 |
| MIL-PRF-15733-61 Revision G:2011 | Filters, Radio Frequency Interference, Styles FL30, FL32, FL34, and FL43 |
| MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 95008D:2023 | CAPACITOR, FIXED, FEED THROUGH, ELECTROMAGNETIC INTERFERENCE SUPPRESSION, (HERMETICALLY SEALED IN METAL CASES) |
| DSCC 97011E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.15 WATT, POWER CURVE B |
| DSCC 97009E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.3 WATT, POWER CURVE A |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.