MIL-STD-1689 Revision A:1990
Current
Current
The latest, up-to-date edition.
FABRICATION, WELDING, AND INSPECTION OF SHIPS STRUCTURE
Available format(s)
PDF
Language(s)
English
Published date
23-11-1990
Publisher
$34.82
Including GST where applicable
Specifies minimum requirements for the manufacture and inspection of the hull of combatant surface ships.
| DocumentType |
Standard
|
| Pages |
185
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL STD 248 : D | WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| ASTM F 994 : 1986 : R1996 : EDT 1 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| MIL-STD-2003-3 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Penetrations) |
| MIL-STD-2148 Revision A:2016 | Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL-DTL-32525 Base Document:2016 | Magazine, Portable (ShipBoard) |
| MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD (REPLACEMENT DOCUMENT NAVSEA TECH PUB S9074-AR-GIB-010/278) |
| ASTM F 994 : 1986 : R2018 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| MIL-STD-1688 Revision A:1990 | Fabrication, Welding and Inspection of HY-80/100 Submarine Applications (See Notice 2 for Replacement Information) |
| ASTM F 994 : 1986 : R2001 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| MIL-S-24645 Revision A:1990 | Steel Plate, Sheet, or Coil, Age-Hardening Alloy, Structural, High Yield Strength (HSLA-80 and HSLA-100) (See Notice 2 for Replacement Information) |
| NAVSEA S9074 AQ GIB 010/248 : 0 | REQUIREMENTS FOR WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| ASTM F 994 : 1986 : R2011 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| AWS D3.7 : 2004 | GUIDE FOR ALUMINUM HULL WELDING |
| ASTM F 994 : 1986 : R2006 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| QQ-A-250-10 Revision E:1978 | Aluminum Alloy 5454, Plate and Sheet (See Notice 3 for Replacement Information) |
| MIL-R-5674 Revision F:1994 | Rivets, Structural, Aluminum Alloy, Titanium Columbium Alloy, General Specification for (S/S by NASM5674) |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| MIL STD 1681 : 0 | FABRICATION, WELDING, AND INSPECTION OF HY-130 SUBMARINE HULL (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTY MUST BE SUBMITTED VIA THE PREPARING ACTY OF THE STANDARD) |
| MIL-E-24403-2 Revision C:1989 | Electrodes - Welding, Flux Cored, Low-Alloy Steel |
| MIL-E-22200-4 Revision D:1991 | Electrodes, Welding, Covered, Copper-Nickel Alloy |
| DOD-P-15328 Revision D:1978 | Primer (Wash), Pretreatment (Formula NO. 117 for Metals) (Metric) (S/S by TT-C-490) |
| AWS A2.4 : 2012 | STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION |
| MIL-E-22200-2 Revision D:1986 | Electrode, Welding Covered (Austenitic Chromium-Nickel Steel) |
| MIL STD 248 : D | WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| MIL-F-19922 Base Document:1958 | Fluxes, Welding (Compositions), Submerged Arc Process with Type \"B\" Electrodes, Carbon and Low-Alloy Steel Application (S/S By MIL-E-23765/4) |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| FF-B-584 Revision F:1989 | Bolts, Square Neck and Tee Head (S/Sby ASME-B18.5, ASME-B18.9,and ASME-B18.18.1M) |
| AWS A5.10 : 1992 | BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| MIL S 867 : A | STEEL CASTING, CORROSION RESISTING AUSTENITIC |
| QQ A 225/2 : D | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 3003 |
| MIL-P-23469-4 Revision B:1988 | Pin-Rivet, Grooved, Round Head; Straight Shank, Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels |
| MIL-E-23765-1 Revision E:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (S/S BY SAE-AMS-S-8802) |
| MIL-S-23008 Revision D:1988 | Steel Castings, Alloy, High Yield Strength (HY-80 and HY-100) (See Notice 2 for Replacement Information) |
| MIL-S-17509 Base Document:1953 | STEEL CASTINGS, AUSTENITIC, CHROMIUM-NICKEL, LOW MAGNETIC PERMEABILITY (S/S BY MIL-C-24707/3 AND ASTM-A744) |
| QQ-A-250-2 Revision E:1983 | Aluminum Alloy 3003, Plate and Sheet (See Notice 3 for Replacement Information) |
| ASTM E 155 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| MIL-P-23469-3 Revision B:1988 | PIN-RIVET, GROOVED, BRAZIER, TRUSS AND FLUSH HEAD; STRAIGHT SHANK, WIDE GRIP RANGE, MULTIPLE LOCKING GROOVES, ALUMINUM ALLOY AND CARBON STEEL (NO S/S DOCUMENT) |
| MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
| MIL-E-18193 Revision B:1974 | Electrodes, Welding, Carbon Steel and Alloy Steel, Bare, Coiled (S/S by MIL-E-23765/1 and MIL-E-23765/4) |
| AWS A5.1 : 91(R1999) | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| MIL-P-23469 Revision D:1992 | Pin-Rivet, Grooved and Collar, Grooved Pin-Rivet, Swage-Locked (Lockpin) General Specification for |
| MIL S 23195 : D | STEEL BARS AND FORGINGS CORROSION RESISTANT |
| QQ A 225/7 : D | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED 5052 |
| MIL-C-20159 Revision C:1985 | Copper-Nickel Alloy Castings (UNS No. C96200 and C96400) (S/S by ASTM-B369) |
| MIL-J-24445 Revision A:1977 | Joint, Bimetallic Bonded, aluminum to Steel |
| QQ A 250/6 : G | ALUMINUM ALLOY 5083, PLATE AND SHEET |
| MIL-E-22200-5 Revision C:1984 | Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen, Low- Alloy Steel for Hardening and Tempering Heat Treatment Applications Only (No S/S/ Document) |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| QQ-S-766 Revision D:1988 | Steel, Stainlessand Heat Resisting, Alloys, Plate, Sheetand Strip (S/S By ASTM-A240, ASTM-A666,and ASTM-A693) |
| MIL E 24403/1 : D | MILITARY SPECIFICATION - ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-S-24645 Revision A:1990 | Steel Plate, Sheet, or Coil, Age-Hardening Alloy, Structural, High Yield Strength (HSLA-80 and HSLA-100) (See Notice 2 for Replacement Information) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| MIL-E-21562 Revision E:1989 | ELECTRODES AND RODS - WELDING, BARE, NICKEL ALLOY |
| WW-T-700-2 Revision E:1983 | Tube, Aluminum Alloy, Drawn, Seamless, 3003 (S/S by SAE-AMS-WW-T-700/2) |
| MIL N 24106 : C | NICKEL-COPPER ALLOY BARS, RODS AND FORGINGS |
| MIL S 23196 : C | STEEL PLATE, SHEET AND STRIP, CORROSION RESISTANT |
| MIL-STD-1688 Revision A:1990 | Fabrication, Welding and Inspection of HY-80/100 Submarine Applications (See Notice 2 for Replacement Information) |
| MIL-P-23469-7 Revision B:1988 | Pin-Rivet, Grooved, Oval 60 DEG. Countersunk Head; Tapered-Section Shank, Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant Steel and Carbon Steels |
| ASTM E 272 : 2015 : REDLINE | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| QQ-N-288 Base Document:1956 | Nickel-Copper Alloy and Nickel-Copper-Silicon Alloy Castings (S/S by ASTM-A494 and MIL-C-24723) |
| MIL-E-22200-3 Revision F:1986 | Electrodes, Welding, Covered, Nickel Base Alloy, and Cobalt Base Alloy |
| MIL-C-20079 Revision H:1987 | Cloth, Glass; Tape, Textile Glass; and Thread, Glass and Wire-Reinforced Glass |
| MIL-N-17163 Revision A:1959 | NICKEL-COPPER ALLOY, WROUGHT, (55-60 PERCENT NICKEL) LOW PERMEABILITY (NO S/S DOCUMENT) |
| MIL-E-23765-2 Revision E:1994 | Electrodes and Rods - Welding, Bare, Solid, or Alloy Cored; and Fluxes, Low Alloy Steel (S/S by MIL-DTL-23765/1F and T9074-BC-GIB-010/0200) |
| MIL E 22200/1 : G | ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS WELDED OR STRESS-RELIEVED WELD APPLICATION |
| ASTM E 310 : 2015 : REDLINE | Standard Reference Radiographs for Tin Bronze Castings |
| MIL-P-23469-2 Revision B:1988 | Pin-Rivet, Grooved, Brazier Head; Straight Shank, Six Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels |
| MIL-STD-1628 Base Document:1974 | Fillet Weld Size, Strength, and Efficiency Determination (See Notice 1 Cancellation for Superseding Information) |
| MIL N 23229 : B (2) | NICKEL CHROMIUM IRON ALLOY BARS AND FORGINGS |
| MIL-STD-22 Revision D:1979 | WELDED JOINT DESIGN |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| MIL-I-24391 Revision C:1990 | Insulation Tape, Electrical, Plastic, Pressure-Sensitive |
| MIL B 15382 : C | BOLT, FIREBRICK ANCHOR |
| MIL-F-18251 Revision C:1967 | Fluxes, Welding, Submerged Arc Process Carbon and Low-Alloy Steel Application (S/S By MIL-E-23765/4) |
| MIL-C-15726 Revision F:1988 | Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire |
| MIL N 23228 : D | NICKEL CHROMIUM IRON ALLOY PLATE, SHEET AND STRIP |
| QQ-A-200-1 Revision D:1983 | ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE AND WIRE, EXTRUDED (REFER TO ASTM-B241/B241M, ASTM-B221 AND SAE-AMS-QQ-A-200/1) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.