MIL-STD-1568 Revision D:2015
Current
Current
The latest, up-to-date edition.
Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
Available format(s)
PDF
Language(s)
English
Published date
31-08-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAIL REQUIREMENTS
6. NOTES
CONCLUDING MATERIAL
APPENDIX A - CORROSION PREVENTION AND CONTROL
PLAN (CPCP) AND FINISH SPECIFICATION
APPENDIX B - CORROSION PREVENTION TEAMS (CPTs)
APPENDIX C - MISCELLANEOUS FACTORS AFFECTING
CORROSION
Sets up the requirements for materials, processes and techniques, and identifies the tasks required to implement an effective corrosion prevention and control program throughout the conceptual, validation, development, production, and sustainment phases of the aerospace weapons systems life cycle.
| DevelopmentNote |
Supersedes MIL HDBK 1568. (08/2014) NEW CHILD NOT 1 2021 IS NOW ADDED
|
| DocumentType |
Standard
|
| Pages |
40
|
| ProductNote |
NEW CHILD NOT 1 2021 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This standard defines the engineering practices, methods, and procedures for the selection and use of materials and processes required for optimum corrosion prevention and control (CPC) of aerospace weapons systems throughout their life cycle (design, acquisition and sustainment phases).
| MIL-A-83577 Revision B:1988 | ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-C-87974 Base Document:1985 | COUNTER, ELECTRONIC, DIGITAL READOUT 26.5 GIGAHERTZ (GHZ) CONTINUOUS WAVE (CW) |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL) |
| DOD-E-83578 Revision A:1987 | EXPLOSIVE ORDNANCE FOR SPACE VEHICLES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-HDBK-1587 Base Document:1996 | MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEM |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE FIGHTING, A/S32P-10, FORCIBLE ENTRY |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-STD-2156 Base Document:1983 | LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| MIL-STD-1587 Revision D:2017 | MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS |
| AFGS-87154 Revision A:1992 | FUEL SYSTEMS, GENERAL DESIGN SPECIFICATION FOR |
| MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-STD-2131 Revision A:1991 | LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| MIL-P-87210 Base Document:1984 | PNEUMATIC POWER SYSTEMS, HIGH PRESSURE |
| ASTM G 64 : 1999 | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys |
| MIL-E-87236 Base Document:1985 | |
| MIL-C-83821 Base Document:1990 | CRANE, WHEEL MOUNTED, CRASH, ROUGH TERRAIN, HYDRAULIC FULL REVOLVING, 4X4, DED, FIGHTER TYPE AIRCRAFT |
| MIL A 87221 : 0 | AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| AFGS 87145 : A NOTICE 1 | ENVIRONMENTAL CONTROL, AIRBORNE |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MIL-O-87226 Base Document:1985 | OXYGEN SYSTEMS, AIRCRAFT |
| SAE AIR 5774 : 2012 | COMPOSITE FUEL TANKS, FUEL SYSTEM DESIGN CONSIDERATIONS |
| ASTM G 64 : 1999 : R2005 | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| JSSG-2006 Base Document:1998 | JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES |
| MIL-M-38795 Revision B:1982 | MANUAL, TECHNICAL, SYSTEM PECULIAR CORROSION CONTROL PREPARATION OF. |
| MIL-L-87139 Base Document:1979 | LANDING GEAR SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES. WRIGHT-PATTERSON AFB OH 45433-6503 |
| SAE ARP 1070E : 2019 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| SAE ARP 1070 : 2014 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| MIL M 87222 : 0 | MECHANICAL SYSTEMS FOR AIRCRAFT DOORS AND CANOPIES |
| MIL-STD-1530 Revision D:2016 | AIRCRAFT STRUCTURAL INTEGRITY PROGRAM (ASIP) |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-F-87154 Base Document:1980 | FUEL SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL-L-85314 Revision A:1983 | LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR |
| JSSG-2010-10 Base Document:1998 | Crew Systems Oxygen Systems Handbook |
| MIL-STD-1818 Revision A:1993 | ELECTROMAGNETIC EFFECTS REQUIREMENTS FOR SYSTEMS |
| MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
| ASTM G 64 : 1999 : R2013 | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys |
| SAE AS5751:2018(R2023) | Design and Operating Requirements of the Onboard Aircraft Refueling System and Associated Ground Refueling Equipment Interface |
| MIL-M-24041 Revision C:1981 | MOLDING AND POTTING COMPOUND |
| SAE AMS 2424 : 2010 | PLATING, NICKEL LOW-STRESSED DEPOSIT |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| SAE AMS 4890 : 2012 | COPPER-BERYLLIUM ALLOY CASTINGS, 97CU - 2.1BE - 0.52CO - 0.28SI, SOLUTION HEAT TREATED (TB00) |
| SAE AMS S 8802 : 2015 | SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| ASTM B 66 : 2015 : REDLINE | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
| MIL-PRF-27617 Revision G:2011 | GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
| SAE AMS 3276 : 2016 | SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-PRF-32014 Revision A:2006 | GREASE, AIRCRAFT AND INSTRUMENT |
| SAE AS 81550A : 2014 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
| SAE AMS 2175 : 2010 | CASTINGS, CLASSIFICATION AND INSPECTION OF |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| SAE AMS 7276H : 2011 | RUBBER: FLUOROCARBON (FKM) HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| SAE AMS 3269 : 2011 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES HIGH STRENGTH, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| SAE ARP 4118 : 2013 | ISOLATION AND CORROSION PROTECTION OF DISSIMILAR MATERIALS, CARBON COMPOSITE STRUCTURE REPAIR |
| SAE AMS 3284 : 2012 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
| MIL-HDBK-275 Revision A:1976 | Guide for Selection of Lubricants, Fluids, and Compounds for Use in Flight Vehicles and Components |
| SAE AMS 2430 : 2015 | SHOT PEENING |
| ASTM B 169/B169M : 2015 : REDLINE | Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-STD-866 Revision C:2007 | Grinding of Chrome Plated Steel and Steel Parts Heat Treated to 180,000 PSI or Over |
| SAE AMS 3277 : 2015 | SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AMS 7287 : 2012 | FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS |
| SAE AMS 2423 : 2015 | PLATING, NICKEL, HARD DEPOSIT |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| SAE AMS 7259 : 2013 | RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| MIL-STD-3021 Base Document:2008 | MANUFACTURING PROCESS STANDARD - MATERIALS DEPOSITION, COLD SPRAY |
| ASTM B 806 : 2014 : REDLINE | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM D 2247 : 2015 : REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| MIL-HDBK-808 Base Document:1996 | Finish, Protective and Codes for Finishing Schemes for Ground and Ground Support Equipment |
| MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
| SAE AMS 3281 : 2016 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE J 2277 : 2013 | SHOT PEENING COVERAGE DETERMINATION |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| ASTM B 30 : 2016 : REDLINE | Standard Specification for Copper Alloys in Ingot Form |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
| SAE AMS 7379 : 2008 | RUBBER: FLUOROCARBON ELASTOMER (FKM) 70 TO 80 HARDNESS, LOW TEMPERATURE SEALING TG -40 DEGREES F (-40 DEGREES C) FOR ELASTOMERIC SEALS IN AIRCRAFT ENGINE OIL, FUEL AND HYDRAULICS SYSTEMS |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| SAE AMS C 83231 : 2001 | COATINGS, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS 6532 : 2014 | STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE |
| MIL-HDBK-838 Base Document:1997 | LUBRICATION OF MILITARY EQUIPMENT |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| SAE AMS 3279 : 2013 | SEALING COMPOUND, SPRAYABLE, FOR INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, FOR INTERMITTENT USE TO 350 DEGREES F (177 DEGREES C) |
| SAE AMS 3374 : 2013 | SEALING COMPOUND AIRCRAFT FIREWALL, SILICONE |
| SAE AMS C 8837 : 2015 | COATING, CADMIUM (VACUUM DEPOSITED) |
| MIL-STD-1500 Revision C:2007 | Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition |
| MIL-HDBK-6870 Revision B:2012 | NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-DTL-18264 Revision E:2015 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| AWS D17.1/D17.1M : 2012 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
| SAE AMS 3265 : 2015 | SEALING COMPOUND, POLYSULFIDE (T) RUBBER, FUEL RESISTANT, NON-CHROMATED CORROSION INHIBITING, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| TT-P-2760 Revision A:1994 | PRIMER COATING; POLYURETHANE, ELASTOMERIC |
| ASTM A 380/A380M : 2017 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| SAE AMS 3278 : 2016 | SEALING AND COATING COMPOUND, POLYURETHANE (PUR), FUEL RESISTANT, HIGH TENSILE STRENGTH/ELONGATION, FOR INTEGRAL FUEL TANKS/FUEL CAVITIES/GENERAL PURPOSE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.