MIL-STD-1516 Revision B:1990
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
Available format(s)
PDF
Superseded date
24-01-1996
Superseded by
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Outlines procedures, materials, and systems for cleaning, painting, plating, and otherwise finishing metal, plastic, wood, and other surfaces. For design purposes, surfaces can be exposed or sheltered.
| Committee |
MFFP
|
| DocumentType |
Standard
|
| Pages |
114
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL T 27252 : A | TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| SAE AMS 2419 : 2015 | PLATING, CADMIUM-TITANIUM |
| MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
| TT-V-51 Revision F:1974 | VARNISH, ASPHALT |
| SAE AMS 2473 : 2013 | CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
| MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
| MIL-M-45202 Revision C:1981 | MAGNESIUM ALLOY, ANODIC TREATMENT OF |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL-E-46096 Revision C:1973 | ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
| MIL-P-52192 Revision B:1971 | PRIMER COATING, EPOXY |
| SAE AMS 2412 : 2015 | PLATING, SILVER, COPPER STRIKE, LOW BAKE |
| SAE AMS 2424 : 2010 | PLATING, NICKEL LOW-STRESSED DEPOSIT |
| TT-W-572 Revision B:1969 | WOOD PRESERVATIVE: WATER-REPELLANT |
| MIL-A-81801 Revision A:1994 | ANODIC COATINGS FOR ZINC AND ZINC ALLOYS |
| SAE AMS 2404 : 2013 | PLATING, ELECTROLESS NICKEL |
| SAE AMS 2422 : 2014 | PLATING, GOLD |
| MIL P 14105 : D | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| MIL-C-81740 Base Document:1969 | COATING, ALUMINUM AND ALUMINUM ALLOYS (METALLIC COMPOUND DECOMPOSITION) |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| TT-S-300 Revision A:1977 | SHELLAC, CUT |
| MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
| MIL-C-87115 Revision A:1989 | COATING, IMMERSION ZINC FLAKE/CHROMATE DISPERSION |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| SAE AMS 2475H : 2009 | PROTECTIVE TREATMENTS, MAGNESIUM ALLOYS |
| MIL-P-21563 Revision B:1962 | POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) |
| TT-P-662 Revision B:1969 | PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE |
| MIL-D-23003 Revision A:1980 | |
| MIL-L-2638 Revision D:1975 | LACQUER, VINYL RESIN, GASOLINE AND WATER RESISTANT |
| MIL-C-17711 Revision B:1974 | Coatings, Chromate, for Zinc Alloy Castings and Hot Dip Galvanized Surfaces |
| TT-E-522 Revision A:1974 | ENAMEL, PHENOLIC, OUTSIDE |
| MIL-C-83445 Revision A:1980 | COATING SYSTEM, POLYURETHANE, NON-YELLOWING WHITE, RAIN EROSION RESISTANT, THERMALLY REFLECTIVE |
| SAE AMS 2402 : 2013 | PLATING, ZINC |
| TT-C-494 Revision B:1985 | COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, ACID RESISTANT |
| MIL-W-5044 Revision C:1970 | WALKWAY COMPOUND, NONSLIP AND WALKWAY MATTING, NONSLIP |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| TT-L-54 Revision C:1976 | LACQUER, SPRAYING, ACID RESISTANT (FOR ALUMINUM SURFACES AROUND STORAGE BATTERIES) |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
| DOD P 23236 : B | PAINT COATING SYSTEMS, STEEL SHIP TANK, FUEL AND SALT WATER BALLAST (METRIC) |
| SAE AMS 2407 : 2012 | PLATING, CHROMIUM, POROUS |
| MIL C 13924 : C | COATING, OXIDE, BLACK, FOR FERROUS METALS |
| TT P 659 : C | PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
| TT P 25 : F NOTICE 1 | PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
| MIL-P-18317 Base Document:1954 | PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
| ASTM A 165 : 1980 | Specification for Electrodeposited Coatings of Cadmium on Steel |
| MIL-M-3171 Revision C:1966 | MAGNESIUM ALLOY PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| MIL-C-83019 Base Document:1968 | COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND |
| TT-E-485 Revision F:1968 | ENAMEL, SEMI-GLOSS, RUST-INHIBITING |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| MIL-C-22751 Revision D:1971 | COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| SAE AMS 2425 : 2012 | PLATING, GOLD FOR THERMAL CONTROL |
| MIL C 23422 : D (2) | CHROMIUM PLATING, ELECTRODEPOSITED (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD) ACTYS MUST BE SUBMITTED VIA THE PREPARING ACTY OF THE SPEC) |
| MIL-P-45209 Revision B:1981 | PALLADIUM PLATING, (ELECTRODEPOSITED) |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
| SAE AMS2474 : 2013 | CHEMICAL TREATMENT FOR ALUMINUM ALLOYS, LOW ELECTRICAL RESISTANCE COATING |
| MIL-C-83231 Revision A:1981 | COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
| ASTM B 456 : 2017 : REDLINE | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL-C-81562 Revision B:1983 | COATING, CADMIUM, TIN CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
| MIL C 450 : C | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
| MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| MIL P 15328 : LATEST | PRIMER PRETREATMENT FORMULA 117 FOR METALS |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL-P-47184 Revision A:1990 | PLATING, NICKEL-TUNGSTEN, ELECTRODEPOSIT ON ALUMINUM ALLOYS, BY SELECTIVE (BRUSH) METHOD |
| SAE AMS 2415 : 2012 | PLATING, LEAD AND INDIUM |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| MIL-V-173 Revision C:1969 | VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONICS, AND ASSOCIATED EQUIPMENT) |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| TT-C-520 Revision B:1973 | COATING COMPOUND BITUMINOUS SOLVENT TYPE UNDERBODY |
| MIL E 46136 : A | ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| SAE AMS 2418 : 2017 | PLATING, COPPER |
| MIL-L-19538 Revision C:1970 | LACQUER, ACRYLIC NITROCELLULOSE, CAMOUFLAGE (FOR AIRCRAFT USE) |
| SAE AMS 2468 : 1999 | HARD ANODIC COATING TREATMENT OF ALUMINUM ALLOYS |
| MIL-F-495 Revision E:1988 | FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
| TT-F-336 Revision E:1978 | FILLER, WOOD, PASTE |
| SAE AMS 2426E : 2013 | COATING, CADMIUM VACUUM DEPOSITION |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL P 15929 : C | PRIMER COATING, SHIPBOARD, VINYL-RED LEAD (FORMULA 119 - FOR HOT SPRAY) |
| TT-V-109 Revision C:1978 | VARNISH, INTERIOR, ALKYD RESIN |
| MIL C 14538 : C | CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
| MIL-N-55392 Revision A:1983 | NICKEL CARBON, POROUS, ELECTRODEPOSITED, FOR CAMOUFLAGE |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| MIL-R-46085 Revision B:1984 | RHODIUM PLATING, ELECTRODEPOSITED |
| MIL C 83466 : LATEST | |
| MIL-E-52835 Revision A:1977 | ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
| MIL-P-21600 Revision A:1962 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| TT-C-542 Revision E:1978 | COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING |
| SAE AMS 2469 : 2014 | HARD ANODIC COATING ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-T-12879 Revision A:1966 | TREATMENT, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES |
| MIL E 46117 : A | |
| MIL-E-52798 Revision A:1976 | ENAMEL, ALKYD CAMOUFLAGE |
| MIL C 20218 : P | CHROMIUM PLATING, ELECTRODEPOSITED, POROUS |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| MIL L 14486 : A NOTICE 1 | LACQUER, VINYL RESIN, SEMI-GLOSS |
| MIL-STD-870 Revision C:2007 | Cadmium Plating, Low Embrittlement, Electrodepositon |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) |
| TT-E-490 Revision E:1975 | ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
| MIL-T-10727 Revision C:1989 | TIN PLATING, ELECTRODEPOSITED OR HOT-DIPPED FOR FERROUS AND NONFERROUS METALS |
| SAE AMS 2423 : 2015 | PLATING, NICKEL, HARD DEPOSIT |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-C-81797 Revision A:1994 | COATING, INORGANICALLY BONDED ALUMINUM (ELECTROPHORECTICALLY DEPOSITED) |
| TT-L-58 Revision E:1978 | LACQUER, SPRAYING, CLEAR AND PIGMENTED, (GENERAL INTERIOR USE) |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| MIL-C-5056 Base Document:1950 | Coating, Permanent Resin; Process for Application of, to Aircraft Parts |
| QQ-S-365 Revision D:1985 | SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR |
| SAE AMS 2478 : 2012 | ANODIC TREATMENT OF MAGNESIUM ALLOYS ACID TYPE, FULL COAT |
| MIL R 3043 : B | RESIN COATING, UNPIGMENTED FOR ENGINE COMPONENTS AND METAL PARTS |
| SAE AMS 2408K : 2013 | PLATING, TIN |
| MIL C 27315 : A | COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
| MIL-C-7460 Revision A:1971 | CHROMIUM PLATING, POROUS CHANNEL TYPE, AIRCRAFT ENGINE CYLINDERS, GENERAL SPECIFICATIONS FOR |
| SAE AMS 2479 : 2012 | ANODIC TREATMENT OF MAGNESIUM ALLOYS ACID TYPE, THIN COAT |
| MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
| MIL G 45204 : C | GOLD PLATING, ELECTRODEPOSITED |
| MIL L 46138 : 0 | LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
| TT-L-20 Revision A:1967 | LACQUER CAMOUFLAGE |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| MIL P 22636 : NOTICE 1 | PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT |
| MIL-C-81751 Revision B:1972 | Coating, Metallic-Ceramic |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| SAE AMS 2401 : 2013 | PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT |
| MIL-STD-865 Revision D:2007 | SELECTIVE, BRUSH PLATING, ELECTRO-DESPOSITION |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS 2411 : 2013 | PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS |
| SAE AMS 2406 : 2015 | PLATING, CHROMIUM, HARD DEPOSIT |
| MIL-P-46856 Base Document:1968 | PRIMER COATING EPOXY, PROCESS FOR APPLICATION OF |
| MIL-P-23408 Revision B:1983 | Plating: Tin-Cadmium (Electrodeposited) |
| MIL-STD-753 Revision C:1990 | CORROSION RESISTANT STEEL PARTS, SAMPLING INSPECTION AND TESTING FOR SURFACE PASSIVATION |
| SAE AMS 2472 : 2014 | ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING |
| MIL-E-480 Revision A:1969 | ENAMEL, BAKING, PHENOL-OR-UREA-FORMALDEHYDE |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL T 16070 : B NOTICE 1 | TREATMENT, MILDEW RESISTANT, FOR ROPE |
| MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
| MIL-L-46064 Revision A:1983 | LEAD TIN ALLOY COATING (ELECTRODEPOSITED) |
| TT-P-664 Revision D:1988 | PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| SAE AMS 2481K : 2015 | Phosphate Treatment Antichafing |
| MIL-E-52929 Base Document:1977 | ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
| MIL C 3301 : C | COMPOUND, ASPHALTIC, HOT MELT [CAVITY LINING] |
| TT-P-636 Revision D:1971 | PRIMER COATING, ALKYD, WOOD AND FERROUS METAL |
| SAE AMS 2400 : 2013 | PLATING, CADMIUM |
| TT-L-32 Revision A:1969 | LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
| SAE AMS 2480 : 2013 | PHOSPHATE TREATMENT PAINT BASE |
| TT-V-121 Revision H:1978 | VARNISH, SPAR, WATER RESISTING |
| MIL-P-50002 Revision B:1981 | PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
| MIL-STD-1501 Revision F:2011 | Chromium Plating, Low Embrittlement, Electrodeposition |
| SAE AMS 2403 : 2015 | PLATING, NICKEL, GENERAL PURPOSE |
| MIL-L-19537 Revision C:1965 | LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT USE) |
| MIL-C-14550 Revision B:1983 | COPPER PLATING (ELECTRODEPOSITED) |
| MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD, (ELECTRODEPOSITED) |
| MIL-A-38267 Revision A:1971 | APPLICATION OF POLYURETHANE FUEL TANK COATINGS |
| MIL V 12276 : D | VARNISH, PHENOLIC, BAKING |
| SAE AMS 2476 : 2012 | ELECTROLYTIC TREATMENT FOR MAGNESIUM ALLOYS, ALKALINE TYPE, FULL COAT |
| MIL-S-8784 Revision B:1971 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| CCC-D-950 Revision F:1989 | DYEING AND AFTER TREATING PROCESSES FOR COTTON CLOTHS |
| MIL-W-13518 Revision C:1967 | WOOD PRESERVATIVE, TETRACHLOROPHENOL AND PENTACHLOROPHENOL, SURFACE SEALING COMPOUND |
| MIL C 60539 : 66 NOTICE 1 | COATING, ANODIC, CONVENTIONAL FOR ALUMINUM AND ALUMINUM ALLOY |
| MIL-S-46844 Revision C:1976 | SOLDER BATH SOLDERING OF PRINTED WIRING ASSEMBLIES |
| MIL C 60536 : NOTICE 1 | |
| MIL-T-12664 Revision B:1965 | TREATMENT, FUNGUS RESISTANT, PARANITROPHENOL, FOR CORK PRODUCTS |
| SAE AMS 2410 : 2010 | PLATING, SILVER, NICKEL STRIKE, HIGH BAKE |
| MIL-W-5050 Revision A:1958 | Walkway, Coating and Matting, Nonslip, Aircraft, Application Of (ASG) |
| MIL-P-27418 Base Document:1967 | PLATING, SOFT NICKEL (ELECTRODEPOSITED, SULFAMATE BATH) |
| MIL-P-87112 Base Document:1977 | PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
| MIL-T-21330 Revision E:1977 | TREATMENT, INSECT RESISTANT, FOR PAPER |
| MIL-C-23217 Revision B:1969 | COATING, ALUMINUM, VACUUM DEPOSITED (ASG) |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| MIL-P-46105 Base Document:1966 | PRIMER COATING: WELD-THROUGH, ZINC-RICH |
| MIL P 14458 : A NOTICE 1 | PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
| MIL-L-46159 Revision A:1976 | LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
| QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| MIL C 83488 : C | COATING, ALUMINUM, ION VAPOR DEPOSITED |
| MIL-P-14553 Revision C:1972 | PRIMER COATING, DIPPING AUTOMOTIVE |
| MIL-C-8837 Revision B:1983 | COATING, CADMIUM (VACUUM DEPOSITED) |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| SAE AMS 2405E: 2013 | ELECTROLESS NICKEL PLATING, LOW PHOSPHORUS |
| MIL L 46142 : 0 | LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
| DOD P 16232 : F | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
| MIL-L-13762 Revision B:1983 | LEAD ALLOY COATING, HOT DIP (FOR IRON AND STEEL PARTS) |
| QQ-T-425 Revision B:1976 | TINPLATE, ELECTROLYTIC |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| SAE AMS 2471 : 2014 | ANODIC TREATMENT OF ALUMINUM ALLOYS SULFURIC ACID PROCESS, UNDYED COATING |
| MIL-HDBK-132 Revision A:1984 | PROTECTIVE FINISHES FOR METAL AND WOOD SURFACES |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| SAE AMS 2414 : 2016 | PLATING, LEAD |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-L-52043 Revision C:1972 | LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
| MIL-L-13808 Revision B:1975 | LEAD PLATING (ELECTRODEPOSITED) |
| MIL-STD-1503 Revision C:2007 | Preparation of Aluminum Alloys For Surface Treatment and Inorganic Coating |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| MIL-STD-868 Revision B:2007 | Nickel Plating, Low Embrittlement, Electro-Deposition |
| MIL-L-3891 Revision B:1974 | Luminescent Material and Equipment (Nonradioactive) |
| QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) |
| VV-L-800 Revision C:1983 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| TT-V-119 Revision D:1973 | VARNISH, SPAR, PHENOLIC RESIN |
| SAE AMS 2470 : 2013 | ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.