MIL-STD-1330 Revision D:1996
Current
The latest, up-to-date edition.
STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
FIGURES
TABLES
APPENDICES
A - MATERIAL COMPATIBILITY
B - ANALYSIS OF NON-VOLATILE RESIDUE IN NAVY
OXYGEN CLEANER BY GRAVIMETRIC
C - TEST PROCEDURE FOR SOLVENT EXTRACTION OF
AN AQUEOUS INORGANIC CLEANER
D - ANALYSIS OF RESIDUE IN SOLVENT BY OPTICALLY
STIMULATED ELECTRON EMISSION USING A SURFACE
QUALITY MONITOR
E - NAVSEA APPROVED HALOGENATED SOLVENTS
Describes cleaning and testing oxygen, hydrogen, nitrogen and gas system piping and components, and cleaning the demineralized water piping and air separation type oxygen-nitrogen plants.
| Committee |
FSC 4730
|
| DevelopmentNote |
D NOTICE 1 - Notice of Change. (08/2007)
|
| DocumentType |
Standard
|
| Pages |
172
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-C-52972 Revision A:1987 | COMPRESSOR UNIT, 5 CFM, 3200 PSI, DIESEL ENGINE DRIVEN, DIVING AIR |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| ADIVP-06 : A2016 | DIVING SYSTEMS - OXYGEN CLEANING PROCEDURES AND STANDARDS |
| ASTM F 1792 : 1997 : R2016 : EDT 1 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| ARP1176A : 2013(R2018) | OXYGEN SYSTEM AND COMPONENT CLEANING |
| ASME B40.100 : 2013 | Pressure Gauges and Gauge Attachments (B40.100 - 2013) |
| MIL-V-22549 Revision D:1968 | VALVE, ANGLE, RELIEF, FOR GAS AND OXYGEN SERVICE (SIZES 2 INCHES LPS AND BELOW), NAVAL SHIPBOARD |
| MIL-C-52973 Revision A:1987 | COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| MIL-STD-1622 Revision B:1999 | STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS |
| ASTM F 1792 : 1997 : R2004 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| MIL-STD-758 Revision C:1990 | PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS |
| ASTM F 1508 : 1996 : R2004 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 1508 : 1996 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| DEFSTAN 68-278/2(2016) : 2016 | CLEANING PROCEDURES & STANDARDS FOR NAVAL OXYGEN SYSTEM COMPONENTS |
| ASTM F 1508 : 1996 : R2010 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| MIL-DTL-22606 Revision D:2011 | FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASTM F 1508 : 1996 : R2016 : EDT 1 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ASTM F 1792 : 1997 : R2010 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| ASTM F 1792 : 1997 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| MIL-HDBK-407 Base Document:1972 | Contamination Control Technology Precision Cleaning Methods and Procedures |
| MIL G 27617 : E | GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
| MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
| A-A-58020 Revision A:1994 | DRUMS, SHIPPING, STEEL WITH POLYETHYLENE INSERT |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| BB-N-411 Revision C:1973 | NITROGEN, TECHNICAL |
| MIL C 24671 : B | CLOTH, LINT-FREE, FLUSHING AND CLEANING |
| FED-STD-209 Revision E:1992 | AIRBORNE PARTICULATE CLEANLINESS CLASSES IN CLEANROOMS AND CLEAN ZONES |
| CGA C 6.2 : 2013 | STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS |
| ASTM F 331 : 2013 : REDLINE | Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) |
| MIL-STD-1246 Revision C:1994 | PRODUCT CLEANLINESS LEVELS AND CONTAMINATION CONTROL PROGRAM |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| CGA C 6.1 : 2013 COR 2015 | STANDARD FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS |
| O-S-642 Revision G:1993 | SODIUM PHOSPHATE, TRIBASIC, ANHYDROUS, DODECAHYDRATE, & MONOHYDRATE, TECHNICAL |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| ASTM D 3921 : 1996 | Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water |
| MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD |
| MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S 736 |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
| MIL F 22606 : C | FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| CGA C 1 : 2016 | METHODS FOR PRESSURE TESTING COMPRESSED GAS CYLINDERS |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.