MIL-STD-1310 Revision H:2009
Current
Current
The latest, up-to-date edition.
Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety
Available format(s)
PDF
Published date
17-09-2009
Publisher
$34.82
Including GST where applicable
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS and DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - GENERAL GUIDANCE
APPENDIX B - ELECTRICAL SAFETY AND PROTECTION
FOR COTS AND NDI EQUIPMENT
APPENDIX C - NONMETALLIC HULL SHIPS - CABLE
GROUND SYSTEM FABRICATION
Describes standard practices to facilitate achievement of the intra-ship and inter-ship electromagnetic compatibility (EMC), electromagnetic pulse (EMP), bonding, and intermodulation interference (IMI) requirements of MIL-STD-464.
| DevelopmentNote |
H NOTICE 1 - Notice of Validation. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This document specifies standard practices to facilitate achievement of the intra-ship and inter-ship electromagnetic compatibility (EMC), electromagnetic pulse (EMP), bonding, and intermodulation interference (IMI) requirements of MIL-STD-464.
| DOD-C-24529 Base Document:1976 | Charges, Battery, Lift Truck and Pallet Transporter Battery Service (Metric) (S/S by A-A-59814) |
| MIL-E-16400 Revision H:1987 | Electronic, Interior Communication and Navigation Equipment, Naval Ship and Shore: General Specification for (S/S by MIL-STD-2036) |
| DOD-STD-2143 Base Document:1983 | MAGNETIC SILENCING REQUIREMENTS FOR THE CONSTRUCTION OF NONMAGNETIC SHIPS & CRAFT (METRIC) |
| MIL-A-29519 Base Document:1988 | Antenna Group, OE-415(V)/SRC 4-MHZ to 12-MHZ Transmitting Twin Whip (No S/S Document) |
| MIL P 24765 : 0 | POWER SUPPLY, UNINTERRUPTIBLE, STATIC |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| MIL-DTL-32529 Base Document:2015 | Power Electronic Conversion Equipment, Naval Shipboard |
| MIL-PRF-32272 Revision A:2016 | Integrated PowerManagement Center (IPMC) |
| MIL-F-24638 Base Document:1984 | Frequency Changer, Solid State, Air Cooled (Naval Shipboard) |
| MIL-PRF-32098 Revision A:2004 | Ultrafiltration System, 10-Gallon Per Minute Oily Waste Membrane (OWMS-10) |
| MIL-A-29517 Base Document:1988 | Antenna, Group, OE-417(V)/SRC 2-MHZ to 30-MHZ Transmitting Whip (Tilting) (No S/S Document) |
| MIL-PRF-30099 Revision A:2011 | Treatment System, Blackwater and Combined Blackwater/Graywater, for Surface Ships |
| MIL-HDBK-1857 Base Document:1998 | Grounding, Bonding and Shielding Design Practices |
| MIL-PRF-32150 Revision B:2013 | Static Automatic Bus Transfer (SABT) Switch on Surface and Submarine Naval Vessels |
| MIL-PRF-17773 Revision D:2015 | Switch, Bus Transfer, Electric Power, Automatic |
| MIL-STD-2003-1 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Cable) |
| MIL-STD-1365 Revision C:2010 | General Design Criteria for Handling Equipment Associated with Weapons and Related Items |
| MIL-PRF-32167 Revision A:2006 | Transient Voltage Surge Suppressor (TVSS) |
| MIL-STD-2003-2 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Equipment) |
| MIL-DTL-32525 Base Document:2016 | Magazine, Portable (ShipBoard) |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL-STD-1683 Revision B:1989 | Connectors and Jacketed Cable, Electric, Selection Standard for Shipboard Use |
| MIL-R-85111 Revision A:1980 | Recovery Assist, Securing and Traversing Systemfor Lamps MK III Helicopter |
| MIL A 24775 : 0 | AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD |
| MIL-DTL-24765 Revision B:2016 | Power Supply, Uninterruptible, Static (Naval Shipboard) |
| MIL-STD-2042-2 Revision C:2016 | Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Equipment) (Part 2 of 7 Parts) |
| DOD STD 2003/1 : 0 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIP AND SUBMARINES (CABLE) |
| MIL-A-24233 Revision B:1989 | Antenna, AS-1735( )/SRC (No S/S Document) |
| MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
| MIL-F-24713 Base Document:1989 | Frequency Changer, Static, Air Cooled (Naval Shipboard) |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-PRF-32168 Base Document:2004 | Variable Speed Drive System for Induction and Synchronous Machines |
| MIL-HDBK-516 Revision C:2014 | Airworthiness Certification Criteria |
| MIL-STD-464 Revision C:2010 | Electromagnetic Environmental Effects Requirements for Systems |
| DOD STD 1399/406 : A | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 406 DIGITAL COMPUTER GROUNDING (METRIC) |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| MIL-STD-188-243 Revision A:2014 | Tactical Single Channel Ultra High Frequency (UHF) Radio Communications |
| DOD-HDBK-289 Base Document:1986 | Lighting on Naval Ships (Metric) |
| MIL-T-16049 Revision C:1980 | Tachometers: Electrical; Self-Generating; Mechanical, Fixed Mounting and Hand Held, and Vibrating Reed |
| MIL-C-1193 Revision A:1992 | Compasses, Ship, Navy, No. 1, Magnetic (Reflector Type, 7-1/2 Inch Card) and Binnacle, Reflection Type (No S/S Document) |
| MIL-E-24743 Base Document:1991 | Enclosure, Common Electronic Equipment, General Specification for (No S/S Document) |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| MIL-A-28880 Base Document:1984 | Antenna Coupler Group, AN/SRA-49( ) (No S/S Document) |
| MIL-A-29518 Base Document:1988 | Antenna Group, OE-418(V)/SRC 10-MHZ to 30-MHZ Transmitting Twin Whip (No S/S Document) |
| MIL-A-29520 Base Document:1988 | Antenna Group, OE-416(V)/SRC, 4-MHZ to 30-MHZ Receiving Twin Whip (No S/S Document) |
| MIL E 2036 : D | ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
| MIL-STD-1397 Revision C:1995 | Input/Output Interfaces, Standard Digital Data, Navy Systems |
| MIL-DTL-2036 Revision E:2014 | Enclosures for Electric and Electronic Equipment, Naval Shipboard |
| IEEE 45-5 : 2014 | ELECTRICAL INSTALLATIONS ON SHIPBOARD - SAFETY CONSIDERATIONS |
| MIL-E-24762 Base Document:1991 | Enclosures for Electronic Equipment, Survivable, Naval Shipboard use |
| MIL-HDBK-253 Base Document:1978 | Guidance for the Design and Test of Systems Protected Against the Effects of Electromagnetic Energy (No S/S Document) |
| MIL-DTL-15303 Revision R:2016 | Audible Signals: Alarms, Bells, Buzzers, Horns, and Sirens, Electronic, Shipboard |
| MIL-PRF-32217 Revision A:2011 | Scale Prevention in Sewage Collection, Holding and Transfer (CHT) and Vacuum CHT (VCHT) Piping Systems for Use on Naval Surface Ships |
| MIL-F-24122 Revision C:1983 | Frequency Changer, Solid State (Naval Shipboard) (No S/S Document) |
| MIL-STD-1857 Base Document:1976 | GROUNDING, BONDING AND SHIELDING DESIGN PRACTICES (S/S BY MIL-HDBK-1857) |
| MIL-P-24587 Base Document:1979 | POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD) (NO S/S DOCUMENT) |
| MIL-PRF-32007 Base Document:2003 | Oily Wastewater Separation System, 6-7-Gallon Per Minute Navy Integrated Membrane System (Nims) |
| MIL-D-23140 Revision D:1992 | Drawings, Installation Control, for Electronic Equipment |
| MIL-PRF-32236 Base Document:2007 | Generator, Chlorine - Portable Electrolytic (PECG) |
| ANEP-45 : 0 |
| MIL-PRF-39014-1 Revision H:2004 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Nonestablished Reliability, Style CKR05, NATO Type Designation NCC61 |
| MIL-DTL-24558 Revision B:2011 | Terminal Boxes, Connection, for Electrical and Electronic Systems, General Specification for |
| MIL-PRF-907 Revision F:2004 | Antiseize Thread Compound, High Temperature |
| A-A-52506 Revision C:2006 | Clamps, Hose |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MIL-STD-464 Revision C:2010 | Electromagnetic Environmental Effects Requirements for Systems |
| MIL-S-24235-14 Revision C:1992 | Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, for Sheet Metal Enclosures |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| MIL-S-24235-9 Revision E:1992 | Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Brass and Steel, for Decks and Bulkheads with Pipe Protection |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| MIL-STD-2003-5 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Connectors) |
| NFPA 1 : 2018 | FIRE CODE |
| MIL-PRF-24758 Revision A:2004 | CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-S-24149 Revision C:1989 | Studs, Welding, and Arc Shields (Ferrules), General Specification for |
| MIL-HDBK-237 Revision D:2005 | Electromagnetic Environmental Effects and Spectrum Supportability Guidance for the Acquisition Process |
| MIL-DTL-24749 Revision B:2014 | Grounding Straps andStuds, Electrical Bonding |
| MIL-I-631 Revision D:1961 | Insulation, Electrical, Synthetic - Resin Composition, Nonrigid |
| MIL-S-24235 Revision C:1992 | Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, General Specification for |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.