MIL-STD-1261 Revision C:1988
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Arc Welding Procedures for Constructional Steels (Refer to Notice 7 for Additional Information)
Available format(s)
PDF
Published date
20-01-1988
Publisher
Superseded date
28-07-2003
Superseded by
$34.82
Including GST where applicable
1. SCOPE
1.1 Scope
1.2 Classification
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.2 Other publications
3. DEFINITIONS
3.1 Contractor, manufacturer
3.2 Welding symbols
3.3 Readily weldable steels
3.4 Steels requiring special process controls
3.5 Carbon equivalent
3.6 Corrosion resisting steels
3.7 Weld crack
3.9 Overlap
3.10 Slag inclusion
3.11 Undercut
3.12 Welding terms
4. GENERAL REQUIREMENTS
4.1 Welding procedures
4.2 Qualifications
4.3 Production weldments
4.4 Welding process
4.5 Qualifications of nondestructive testing inspection
(NDTI) personnel
4.6 Evaluation of workmanship specimens
5. DETAIL REQUIREMENTS
5.1 Class 1
5.2 Class 2
5.3 Class 3
6. NOTES
6.1 Intended use
6.2 Heat input calculation
6.3 Contract data requirements
6.4 Subject term (keyword) listing
Outlines classification of metal-arc welding of constructional steels and the standards required for documentation prior to production welding.
| DevelopmentNote |
C NOTICE 5 - Notice of Cancellation/Superseded by TACOM DRAWING 12479550 (07/2003) C NOTICE 6 - Notice of Cancellation/Superseded by AWS D1.1/D1.1M. (04/2017)
|
| DocumentType |
Standard
|
| Pages |
34
|
| ProductNote |
NEW CHILD NOT 7 2018 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This standard covers the classification of metal-arc welding of constructional steels and the procedures required for documentation before production welding.
| MIL-P-70786 Base Document:1989 | Pallet, Standard Metal |
| MIL-M-49275 Base Document:1987 | MASTS, QUICK ERECT, EXPANDABLE AB-1309(V)/TRC (NO S/S DOCUMENT) |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN: M60, M60A1, M60A1 (RISE), AND M60A3; PROCESSING FOR SHIPMENT AND STORAGE OF (S/S BY PURCHASE DESCRIPTION ATPD2238) |
| MIL-A-62019 Revision B:1969 | Armored Reconnaissance/Airborne Assault Vehicle Full Tracked, 152MM, M551; Processing for Storage and Shipment of (See Notice 1 for Replacement Information) |
| MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL (S/S BY MIL-W-63150) |
| MIL-C-70469 Base Document:1984 | CONTAINER, STEEL FOR BULK PROPELLANT |
| MIL-E-52715 Revision C:1992 | Erection and Maintenance Equipment for Cable Reinforcement Set for Panel Bridge, M-2 (Bailey Type) (No S/S Document) |
| MIL-W-63150 Base Document:1977 | Weapons and Support Materiel Standard Quality Assurance Provisions for |
| MIL-C-14200 Revision C:1978 | Containers, Shipping and Storage: Metal, Reusable; for Engines, Transmissions, Differentials, Transfers, and Similar Assemblies (Metric) (S/S by A-A-52462) |
| MIL-R-70502 Base Document:1984 | Rack, Storage Small Saw (M13) |
| MIL-G-45178 Revision A:1966 | Gun, Self-Propelled, Full Tracked, Twin 40MM, M42 and M42A1, Preparation for Storage and Shipment of (No S/S Document) |
| MIL-A-45940 Base Document:1971 | Armament Subsystem, Helicopter, 7.62MM Machine Gun, door Mounter, Light Weight, M24 (Less M60D Machine Gun) |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM GUN, M48A5, PROCESSING FOR STORAGE & SHIPMENT OF (NO S/S DOCUMENT) |
| MIL-S-85510 Base Document:1981 | Seats, Helicopter Cabin, Crashworthy, General Specification for |
| MIL-A-70753 Base Document:1988 | Adapters, Pallet, Wooden, for Metal Container for 105MM and 120MM Tank Ammunition |
| MIL-D-63303 Revision B:1988 | Dispenser, Mine, Ground Vehicle, M128 |
| MIL-P-45971 Base Document:1975 | Product Engineering Quality Engineering System (PEQES),for Weaponsand Support Materiel (No S/S Document) |
| MIL-C-5584 Revision D:1988 | Container, Shipping and Storage, Metal Reusable (No S/S Document) |
| MIL-R-48628 Revision A:1993 | Rack, Storage, Small Arms: M14 (No S/S Document) |
| MIL-C-2440 Revision F:1992 | Container, Metal, for Propelling Charge |
| MIL-C-14613 Revision A:1972 | Charger, Bolt, Caliber .50 Browning Machine Gun, M10 |
| MIL-A-71180 Base Document:1993 | Adapter, Metal Pallet |
| MIL-R-70553 Base Document:1986 | Rack, Storage MK19 (XM15) |
| MIL-L-52325 Revision D:1988 | Launcher, Transporter, Bridge, M48A5 or M60A1 Tank Chassis |
| MIL-T-45917 Revision A:1974 | Target Mechanism, Night Firing, Small Arms, M40 |
| MIL-F-13926 Revision B:1984 | Fire Control Materiel, Manufacture and Inspection, General Specification for |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-A-71179 Base Document:1993 | Adapter, Metal Pallet for Stinger Weapon System |
| MIL-A-70754 Base Document:1989 | Adapters, Pallet, Metal, for Metal Container for 105MM and 120MM Tank Ammunition (S/S by MIL-A-70788) |
| MIL-T-52735 Revision B:1991 | Transporter: M812 Chassis, For Ribbon Floating Bridge (No S/S Document) |
| MIL-A-45941 Base Document:1971 | Armament Subsystem, Helicopter, 7.62MM Machine Gun: Door Mounted, Light Weight, M23 (Less M60D Machine Gun) |
| MIL-C-38612 Revision A:1967 | Container, Shipping and Storage, CNU-77/E23 |
| MIL-A-45947 Base Document:1972 | Armament Subsystem, Helicopter, 7.62MM Machine Gun: Ramp Mounted, Light Weight, M41 (Less M60D Machine Gun) |
| MIL C 51507 : C NOTICE 3 | CANISTER AND COMPONENTS, M825 |
| MIL C 70478 : 0 | CONTAINER, AMMUNITION, METAL FOR CARTRIDGE, 120MM, TANK AMMUNITION |
| MIL-E-24403-2 Revision C:1989 | Electrodes - Welding, Flux Cored, Low-Alloy Steel |
| QQ E 450 : A | |
| AWS A2.4 : 2012 | STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION |
| MIL-E-22200-2 Revision D:1986 | Electrode, Welding Covered (Austenitic Chromium-Nickel Steel) |
| AWS A5.20 : 1995 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| MIL-R-5632 Revision B:1972 | RODS AND WIRE, STEEL, WELDING (FOR AIRCRAFT APPLICATIONS) (S/S BY SAE-AMS6457, SAE-AMS6452, SAE-AMS6456, SAE-AMS6459, SAE-AMS6331, SAE-AMS6461, SAE-AMS6462, SAE-AMS6458, SAE-AMS5027 AND SAE-AMS5028) |
| AWS A5.18 : 1993 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING |
| MIL-STD-410 Revision E:1991 | NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION (SEE NAS410 AS A POSSIBLE REPLACEMENT) |
| DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
| MIL-E-23765-1 Revision E:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-E-22200-6 Revision C:1976 | Electrodes, Welding, Mineral Covered, Low Hydrogen, Medium and High Tensile Steel (S/S by MIL-DTL-22200/1 and MIL-E-22200/10) |
| AWS A5.5 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| MIL-E-18193 Revision B:1974 | Electrodes, Welding, Carbon Steel and Alloy Steel, Bare, Coiled (S/S by MIL-E-23765/1 and MIL-E-23765/4) |
| AWS A5.1 : 91(R1999) | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.29 : 1998 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| MIL-STD-6866 Base Document:1985 | Inspection, Liquid Penetrant (S/S by ASTM-E1417) |
| MIL-STD-453 Revision C:1984 | Inspection, Radiographic (S/S By ASTM-E1742) |
| MIL-STD-1595 Revision A:1982 | QUALIFICATION OF AIRCRAFT, MISSILE & AEROSPACE FUSION WELDERS (SAE-AMS-STD-1595) |
| MIL-E-8697 Revision E:1972 | Electrodes, Welding, Covered, Low-Hydrogen, Heat-Treatable Steel (No S/S Document) |
| AWS A5.26 : 1991 | SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING |
| MIL-M-47230 Base Document:1974 | MAGNETIC PARTICLE INSPECTION: SOUNDNESS REQUIREMENTS FOR MATERIALS, PARTS, AND WELDMENTS (S/S BY MIL-STD-1907) |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| MIL E 24403/1 : D | MILITARY SPECIFICATION - ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-E-22200-7 Revision B:1975 | Electrodes, Welding, Covered, Molybdenum Alloy Steel Application (S/S by AWS-A5.5) |
| MIL-W-8611 Revision A:1957 | WELDING, METAL ARC AND GAS, STEELS, AND CORROSION AND HEAT RESISTANT ALLOYS; PROCESS FOR (S/S BY MIL-STD-2219) |
| AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| MIL-STD-1265 Revision A:1987 | RADIOGRAPHIC INSPECTION, CLASSIFICATION AND SOUNDNESS REQUIREMENTS FOR STEEL CASTINGS (S/S BY MIL-HDBK-1265) |
| MIL-E-23765-2 Revision E:1994 | Electrodes and Rods - Welding, Bare, Solid, or Alloy Cored; and Fluxes, Low Alloy Steel (S/S by MIL-DTL-23765/1F and T9074-BC-GIB-010/0200) |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| AWS A5.17:1989 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| MIL E 22200/1 : G | ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS WELDED OR STRESS-RELIEVED WELD APPLICATION |
| AWS A5.23 : 1990 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
| MIL-STD-1264 Revision B:1989 | RADIOGRAPHIC INSPECTION FOR SOUNDNESS OF WELDS IN STEEL BY COMPARISON TO GRADED ASTM E390 REFERENCE RADIOGRAPHS (S/S BY MIL-HDBK-1264) |
| AWS A5.28 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL FILLER METALS FOR GAS SHIELDED ARC WELDING |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.