MIL-STD-104 Revision C:1986
Current
Current
The latest, up-to-date edition.
LIMITS FOR ELECTRICAL INSULATION COLOR
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Determines limits for electrical insulation colors on wire and cable insulations. The limits of a specified color define the extremes established for that color. The nominal defines the hue, lightness and saturation (chroma) suitable for the specified color.
| Committee |
FSC 6145
|
| DocumentType |
Standard
|
| Pages |
9
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| DSCC 04046 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| SAE AMS 3655D :2016 | TUBING, ELECTRICAL INSULATION, THIN WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL S 24623 : B | SPLICE, FIBER OPTIC CABLE, GENERAL SPECIFICATION FOR (METRIC) |
| DSCC 04039 : D | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREES C, 600 VOLT |
| MIL-C-22613 Base Document:1963 | CABLE, SPECIAL PURPOSE, ELECTRICAL, SHIELDED (SHIPBOARD USE) |
| SAE AS 85080 : 2012 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| MIL-W-22759-1 Revision F:1992 | WIRE, ELECTRICAL, FLUOROPOLYMER- INSULATED, PTFE AND PTFE-COATED GLASS, SILVER-COATED COPPER CONDUCTOR, 600-VOLT |
| MIL-C-5809 Revision G:1987 | CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| MIL C 27500 : G | CABLE, POWER, ELECTRICAL & CABLE SPECIAL PURPOSE, ELECTRICAL SHIELDED & UNSHIELDED |
| DOD C 85045 : C | CABLE, FIBER OPTICS, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-I-82799 Base Document:1989 | INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE |
| MIL-C-47238 Revision A:1987 | CABLE, ELECTRICAL, SHIELDED AND JACKETED, SPECIAL PURPOSE |
| SAE AS 8905 : 2012 | FITTINGS AND CARGO RINGS, TIE-DOWN, AIRCRAFT FLOOR |
| MIL-C-3884 Revision B:1990 | CORD, ELECTRICAL (SHORT LAY) |
| SAE AS 85848 : 2017 | SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AMS 3636 : 2012 | TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYOLEFIN, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
| MIL-C-23553 Revision B:1976 | CABLES, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS |
| MIL-DTL-25038 Revision J:2012 | WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
| SAE AS 5942 : 2014 | MARKING OF ELECTRICAL INSULATING MATERIALS |
| MIL-W-81044 Revision B:1973 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY |
| MIL-DTL-55446 Revision D:2011 | CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED |
| DSCC 04036 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT |
| DSCC 04043 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT |
| SAE AS 58091 : 2012 | CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| HH-I-595 Revision C:1976 | INSULATION TAPE, ELECTRICAL, PRESSURE-SENSITIVE ADHESIVE, PLASTIC |
| MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| DSCC 23003:2023 | WIRE, ELECTRICAL, FLUOROPOLYMER INSULATED, SMOOTH SURFACE, NORMAL, EXTRA HIGH STRENGTH COPPER CONDUCTOR, NICKEL COATED, 260 °C, 600 VOLT |
| MIL-HDBK-508 Base Document:1998 | WIRING AND WIRING DEVICES FOR COMBAT AND TACTICAL VEHICLES, SELECTION AND INSTALLATION OF |
| MIL-STD-339 Base Document:1987 | WIRING AND WIRING DEVICES FOR COMBAT AND TACTICAL VEHICLES, SELECTION AND INSTALLATION OF |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| MIL W 8777 : C | WIRE, ELECTRICAL, SILICONE-INSULATED COPPER 600-VOLT, 200 DEGREE C |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| MIL-C-85485 Revision A:1983 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| MIL-C-81511 Revision F:1992 | CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT ENVIRONMENT RESISTING, AND ACCESSORIES GENERAL SPECIFICATION FOR |
| SAE AMS T 81914 : 2013 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-81381-11 Revision D:2017 | WIRE, ELECTRIC, FLUOROCARBON/POLYIMIDE INSULATED, MEDIUM WEIGHT, SILVER COATED COPPER CONDUCTOR, 600 VOLTS, 200 DEG C, NOMINAL 8.4 OR 15.4 MIL WALL |
| MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
| MIL-W-81822-15 Revision A:1982 | WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-CHLOROTRIFLUOROETHYLENE (ECTFE) INSULATION, SILVER COATED SOLID CONDUCTOR |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| MIL W 76 : D | WIRE AND CABLE, HOOKUP, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-C-55357 Base Document:1971 | CABLE, TELEPHONE, SHIELDED (INSIDE WIRING) |
| DSCC 04041 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| MS3187 Revision F:2007 | PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS |
| MIL C 49055 : B | CABLE, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
| MIL C 27072 : B | CABLE, POWER, ELECTRICAL & CABLE, SPECIAL PURPOSE ELECTRICAL, MULTICONDUCTOR & SINGLE-SHIELDED - GENERAL SPECIFICATION FOR |
| ARINC 628-6 : 2002 | CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION |
| DSCC 04038 : D | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| SAE AS 81822 : 2011 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| ASTM D 3150 : 2011-09 | SPECIFICATION FOR CROSSLINKED AND NONCROSSLINKED POLY(VINYL CHLORIDE) HEAT-SHRINKABLE TUBING FOR ELECTRICAL INSULATION |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| DSCC 04042 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREES C, 600 VOLT |
| SAE AMS 3653 : 2016 | TUBING, ELECTRICAL INSULATION, STANDARD WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-W-47206 Base Document:1974 | WIRE AND CABLE, ELECTRICAL, SINGLE CONDUCTOR, TWISTED PAIRS AND MULTICONDUCTOR SHIELDED AND JACKETED HIGH TEMPERATURE |
| MIL-C-81582 Revision B:1975 | CONNECTOR, ELECTRICAL, BAYONET COUPLING, ENVIRONMENTAL RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-C-22617 Base Document:1963 | CABLES SPECIAL PURPOSE, ELECTRICAL, NON-SHIELDED (SHIPBOARD USE) |
| MIL-STD-685 Base Document:1961 | IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH AND TELETYPE SIGNALS |
| MIL-DTL-27500 Revision H:1997 | CABLE, POWER, ELECTRICAL AND CABLE SPECIAL PURPOSE, ELECTRICAL SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR |
| MIL-DTL-5898 Revision H:2012 | CORDS, ELECTRICAL (WF-5/U, WF-14/U, WD-34/U, WM-53/U, WM-85/U) |
| MIL-DTL-8777 Revision F:2011 | WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
| MIL-DTL-39024-18 Revision F:2008 | CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; MICRO-MINIATURE, SINGLE TEST POINT (2-LEG MOUNTING), LOW VOLTAGE, .080 INCH |
| MIL-P-24364 Base Document:1969 | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING SHEET, GLASS MAT |
| MIL C 85045 : E | CABLES, FIBER OPTICS, (METRIC), GENERAL SPECIFICATION FOR |
| MIL-C-7078 Revision C:1971 | CABLE, ELECTRIC, AEROSPACE VEHICLE, GENERAL SPECIFICATION FOR |
| MIL C 13777 : G | CABLE, SPECIAL PURPOSE, ELECTRICAL, CONDUCTORS GENERAL SPECIFICATION FOR |
| MIL C 5898 : D | CORD, ELECTRICAL [WF 5/U, WF 14/U,WD 34/U, WM 53/U, WM 85/U] |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| MIL-T-81914 Base Document:1973 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL-C-22442-34 Revision A:1991 | Cable Assembly, Radio Frequency (Aircraft Audio), Cable |
| MIL-DTL-13777 Revision L:2014 | CABLE, SPECIAL PURPOSE, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-W-81822 Revision A:1982 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| MIL-I-85080 Base Document:1977 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| MIL-DTL-81381-22 Revision A:2017 | WIRE, ELECTRIC, FLUOROCARBON/POLYMIDE INSULATED, MEDIUM WEIGHT, TIN COATED COPPER CONDUCTOR, 600 VOLTS, 150 DEGREES C NOMINAL 8.4 OR 15.4 MIL WALL |
| SAE AS 85485 : 2017 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| DSCC 04045 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| DSCC 04037 : C | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| ASTM D 3149 : 2006 | Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D 3149 : 2006 : R2013 | Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation (Withdrawn 2020) |
| DSCC 04034 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, COPPER CONDUCTOR, TIN COATED, 150 DEGREES C, 600 VOLT |
| MIL C 22627 : 0 | COATING, CONFORMAL, RESIN |
| MIL C 3883 : A | CORD, ELECTRICAL, SHIELDED [AUDIO FREQUENCY] |
| MIL-STD-681 Revision F:2012 | IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE |
| MIL C 3432 : F | CABLE, [POWER AND SPECIAL PURPOSE] AND WIRE ELECTRICAL [300 AND 600 VOLTS] |
| DSCC 04044 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH WEIGHT, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL-T-47023 Base Document:1974 | TAPE, HEAT SHRINKABLE |
| MIL-F-8905 Revision B:1967 | FITTINGS AND CARGO RINGS, TIEDOWN, AIRCRAFT FLOOR |
| MIL-STD-195 Base Document:1955 | MARKING OF CONNECTIONS FOR ELECTRICAL ASSEMBLIES |
| MIL-W-22759 Revision E:1990 | WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| NASA MSFC SPEC 708 : 2007 | SPECIFICATION FOR IDENTIFICATION MARKERS FOR SPACE SYSTEMS ELECTRICAL HARNESSES |
| MIL C 55446 : A NOTICE 2 | CABLE, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED |
| MIL C 55668 : A | CORD, ELECTRICAL AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT) |
| MIL-DTL-49055 Revision G:2017 | CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
| MIL-W-22759-23 Base Document:1974 | WIRE, ELECTRIC, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT |
| MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
| DSCC 04047 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 30, 28, 26 AWG, 600 VOLT |
| MIL-DTL-3849 Revision C:2005 | CORD, ELECTRICAL (TINSEL) |
| MIL-C-15479 Revision C:1958 | CABLE, POWER, ELECTRICAL, SUBMARINE, NAVY STANDARD HARBOR DEFENSE |
| MIL-P-24627 Base Document:1984 | PENETRATORS, BULKHEAD, CONNECTORIZED, FIBER OPTIC (FOR INBOARD USE ON NAVY SHIPS AND SUBMARINES) |
| MIL C 24640 : A | CABLE, LIGHT WEIGHT, ELECTRIC, LOW SMOKE, FOR SHIPBOARD USE GENERAL SPECIFICATION FOR |
| MIL-DTL-76 Revision E:2016 | WIRE AND CABLE, HOOKUP, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL P 81305 : A | POWER, DISTRIBUTION PANEL, ALTERNATING CURRENT, F-4 AIRCRAFT, SPECIFICATION FOR |
| MIL-W-22759-2 Revision G:1994 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT |
| MIL-STD-686 Revision C:1990 | CABLE AND CORD, ELECTRICAL, IDENTIFICATION MARKING AND COLOR CODING OF |
| MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
| MIL W 25038 : F | WIRE, ELECTRICAL, HIGH TEMP, FIRE RESISTANT, AND FLIGHT CRITICAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-23053 Revision E:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AS 6070 : 2015 | AEROSPACE CABLE, HIGH SPEED DATA, COPPER |
| MIL-DTL-3883 Revision B:2003 | CORD, ELECTRICAL, SHIELDED (AUDIO FREQUENCY) |
| DSCC 04040 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| SAE AS 5419 : 2003 | CABLE, THERMOCOUPLE EXTENSION, SHIELDED AND UNSHIELDED |
| SAE AS 6019 : 2012 | ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC |
| MIL-I-15265 Revision C:1992 | INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) |
| MIL-M-81531 Base Document:1967 | MARKING OF ELECTRICAL INSULATING MATERIALS |
| MIL W 16878 : F | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-C-55483 Revision B:1990 | CABLE POWER ELECTRICAL, FLAT THREE CONDUCTOR |
| DSCC 04048 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 26, 20, 18, 16 AWG, 600 VOLT |
| MIL-W-7072 Revision B:1962 | WIRE, ELECTRIC 600 VOLT, ALUMINUM, AIRCRAFT GENERAL SPECIFICATION FOR [ASG] |
| MIL-DTL-55668 Revision D:2009 | CORD, ELECTRICAL; AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT) |
| MIL-DTL-13169 Revision E:2011 | WIRE, ELECTRICAL (FOR INSTRUMENT TEST LEADS) |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| MIL-DTL-49285 Revision A:2008 | CABLES, SPECIAL PURPOSE, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS, TRIPLETS, OR QUADS, GENERAL SPECIFICATION FOR |
| MIL-I-22129 Revision C:1962 | INSULATION TUBING, ELECTRICAL, POLYTETRAFLUOROETHYLENE RESIN, NONRIGID (SEE ASTM D 3295) |
| MIL-STD-687 Revision A:1973 | WIRE, THERMOCOUPLE, IDENTIFICATION MARKING AND COLOR CODING OF |
| MIL-DTL-3432 Revision J:2009 | CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS) |
| MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
| DSCC 04037 D : 2019 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| DOD S 24623 : 1985 | SPLICE, FIBER OPTIC CABLE, GENERAL SPECIFICATION FOR (METRIC) |
| SAE AMS DTL 23053 : 1999 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| MIL C 3849 : B | CORD, ELECTRICAL (TINSEL) |
| MIL-W-5086 Revision C:1974 | WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| DSCC 04035 : A13032009 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT |
| SAE AMS 3582 : 2017 | PLASTIC TUBING, ELECTRICAL INSULATION - CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.