MIL-R-23761 Revision B:1975
Current
The latest, up-to-date edition.
Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for
01-10-1975
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Describes the solid state direct current voltage regulators or control panels used to regulate, control and protect aircraft engine driven direct current generators.
DevelopmentNote |
Supersedes MIL R 19750 (A). B NOTICE 1 - Notice of Inactivation for new design. (07/2005)
|
DocumentType |
Standard
|
Pages |
39
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
This specification covers solid state direct current voltage regulators or control panels used to regulate, control and protect aircraft engine driven direct current generators.
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
MIL-DTL-6162 Revision C:2000 | GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR |
MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
MIL-D-8708 Revision C:1991 | DEMONSTRATION REQUIREMENTS FOR AIRPLANES |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
MIL-M-3171 Revision C:1966 | MAGNESIUM ALLOY PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION |
MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
MIL E 5400 : T | ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL SPECIFICATION FOR |
MIL-STD-143 Revision B:1969 | STANDARDS, AND SPECIFICATIONS ORDER OF PRECEDENCE FOR THE SELECTION OF |
MS33543 Revision A:1953 | CRITERIA TEMPERATURE AND ALTITUDE RANGE SELF COOLED ELECTRIC EQUIPMENT |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
MIL-STD-794 Revision E:1982 | PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF |
DOD-D-1000 Revision B:1977 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
MIL STD 749 : B (2) | PREPARATION AND SUBMISSION OF DATA FOR APPROVAL OF NONSTANDARD PARTS |
QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
MIL-STD-781 Revision D:1986 | RELIABILITY TESTING FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.