MIL-PRF-6106 Revision P:2014
Current
Current
The latest, up-to-date edition.
Relays, Electromagnetic General Specification for
Available format(s)
PDF
Published date
03-12-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Sets up general requirements for electromechanical relays with contact ratings from 25 amperes resistive (unless otherwise specified) and upward for use in electrical applications.
| DevelopmentNote |
Supersedes MIL R 6106. (05/2001) NEW CHILD NOT 1 2022 IS NOW ADDED
|
| DocumentType |
Standard
|
| Pages |
127
|
| ProductNote |
NEW CHILD NOT 1 2022 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification establishes general requirements for electromechanical relays with contact ratings from 25 amperes resistive (unless otherwise specified) and upward for use in electrical applications. Auxiliary contacts may be rated at lower currents. Relays covered by this specification are capable of meeting the electrical and environmental requirements when mounted directly to the structure of aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support and shipboard equipment. Other ratings may be as specified (see 3.1). CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. For additional application and caution information, see 6.1.
| MIL-PRF-6106-12 Revision F:2011 | RELAY, ELECTROMAGNETIC (TYPE 1), MAGNETIC LATCH, 25 AMPERES, 3PNO MAIN CONTACTS, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS, HERMETICALLY SEALED |
| MIL-STD-1580 Revision B:2003 | DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS |
| MIL-PRF-6106-41 Revision C:2012 | RELAY, ELECTROMAGNETIC, 25 AMPERES, 3PNO, WITH 2 AMPERE 1PDT, AUXILIARY CONTACTS, HERMETICALLY SEALED, TYPE 1 |
| MIL-DTL-12883-45 Revision D:2003 | Sockets, Plug-In Electronic Components, for Relays, for 2-Pole, 5 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-PRF-6106-39 Revision G:2017 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 5 AMPERES, 4PDT, HERMETICALLY SEALED |
| AN3335 Revision 5:2011 | RELAY, 5 AMP, 3PST, UNSEALED, CLASS O |
| MIL-PRF-6106-15 Revision E:2011 | RELAY, ELECTROMAGNETIC, 50 AMPERES, DC, SPDT, HERMETICALLY SEALED |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MS25919 Revision E:2006 | RELAYS, ELECTROMAGNETIC TYPE 1, 10 AMPERE, 4 PDT |
| MS25032 Revision K:1996 | RELAY, ELECTROMAGNETIC, 200 AMPERES, 2 PDT, (N.O.) TYPE 2, NONHERMETICALLY SEALED, MECHANICALLY INTERLOCKED |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MS25327 Revision N:2003 | RELAY, 10 AMP, 4 PDT, TYPE 1, HERMETICALLY SEALED, SOCKET MOUNTED |
| MS24143 Revision X:2003 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PST (N.O.), TYPE 1, HERMETICALLY SEALED |
| MS24568 Revision K:2003 | RELAY, ELECTROMAGNETIC, 10 AMPERES, 4 PDT, TYPE 1, HERMETICALLY SEALED |
| MS24168 Revision T:2003 | RELAYS, ELECTROMAGNETIC, 100 AMPERES, 3 PST, (N.O.), TYPE 1, HERMETICALLY SEALED |
| MS27243 Revision M:2014 | Relay, 10 AMP, 4PDT, Sealed, Class O, Accessory |
| MIL-R-83726-14 Revision E:2016 | RELAYS, HYBRID, TIME DELAY, (ON OPERATE), TYPE 1, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED, FIXED TIME, 0.100 TO 300 SECONDS |
| MS27709 Revision H:2011 | RELAYS, ELECTROMAGNETIC, 10 AMPERES, 4 PDT, TYPE 1, HERMETICALLY SEALED |
| MS25273 Revision H:2003 | RELAYS, ELECTROMAGNETIC, 10 AMPERES, 2 PDT, TYPE 1, SOLDER TERMINALS, STUD MOUNTED, HERMETICALLY SEALED |
| MS27714 Revision F:2011 | RELAYS, 75 AMPERE, 3PST, N.O. TYPE 1, COIL AND CONTACTS INDIVIDUALLY SEALED |
| AN3372 Revision 6:2010 | RELAY, 200 AMP, 2PST, CLASS O, UNSEALED |
| MIL-PRF-6106-20 Revision D:2011 | RELAYS, ELECTROMAGNETIC, MAGNETIC LATCH, 25 AMPERES, SPDT, HERMETICALLY SEALED |
| MS27247 Revision N:2014 | RELAYS, ELECTROMAGNETIC, 10 AMPERES, 2 PDT TYPE 1, HERMETICALLY SEALED |
| MS27245 Revision R:2012 | RELAYS, ELECTROMAGNETIC, 10 AMPERES, 2 PDT TYPE 1, HERMETICALLY SEALED |
| MS24178 Revision H:2003 | RELAYS, ELECTROMAGNETIC, 55 AMPERES, 2PST, (N.O.) TYPE 2, NONHERMETICALLY SEALED |
| MIL-PRF-6106-26 Revision H:2017 | Relays, Electromagnetic, 50 Amperes SPST, NO, with 5 Ampere SPDT Auxiliary Hermetically Sealed |
| MS24192 Revision R:2016 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PST (N.O.) TYPE 2, NON-HERMETICALLY SEALED |
| MS27418 Revision L:2013 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3PST-NO, TYPE 1, HERMETICALLY SEALED, HOOK AND SCREW TERMINALS, STUD AND BRACKET MOUNTED |
| MS25272 Revision K:2012 | Relays, Electromagnetic, 10 Amperes, 4 PDT, Type I, Potted Lead, Hermetically Sealed |
| MIL-DTL-12883-50 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components, Brackets and Socket Assembly for Relays, 2-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MS24140 Revision M:2003 | RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST (N.O.), TYPE 1, HERMETICALLY SEALED |
| MIL-PRF-6106-48 Revision C:2005 | RELAY, ELECTROMAGNETIC, 100 AMPERES, SPST (N.O.) WITH SPDT (FORM Z) 5 AMPERES AUXILIARY CONTACTS, HERMETICALLY SEALED, TYPE 1 |
| MIL-PRF-6106-9 Revision E:2011 | RELAY, ELECTROMAGNETIC, CONTINUOUS DUTY, 60 AMP, 3PDT, ENVIRONMENTALLY SEALED |
| MIL-PRF-6106-11 Revision E:2011 | RELAY, ELECTROMAGNETIC, NORMALLY CLOSED, CONTINUOUS DUTY, 60 AMP, 3PST, ENVIRONMENTALLY SEALED |
| MIL-R-83726-23 Revision E:2015 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TYPE 2B, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED |
| AN3306 Revision 7:2013 | Relay, 10 AMP, 2 PDT, Sealed, Connector Mounting, Class O (No S/S Document) |
| MS24171 Revision J:2017 | RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1 PST (N.O.), TYPE 2, NON-HERMETICALLY SEALED |
| SAE AIR 38 : 2015 | GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MS24376 Revision R:2017 | Relays, Electromagnetic, 50 Amperes, 3PST (NO), Type I, Hermetically Sealed |
| MIL-DTL-12883-53 Revision B:2003 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, MOUNTING TRACK, FOR RELAY SOCKETS AND ELECTROMAGNETIC RELAYS |
| MS27706 Revision J:2013 | Relays, Electromagnetic, 20 Amperes, 3 PST, Mechanical Interlock, (Center Off) Load, Transfer, Type I, Hermetically Sealed |
| MS24166 Revision J:2003 | RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST, (N.O.) TYPE 2, NONHERMETICALLY SEALED |
| MIL-DTL-12883-41 Revision F:2003 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, FOR RELAYS, 2-POLE, 10 AMPERES (MIL-PRF-6106 AND MIL-PRF-83536) |
| MS25917 Revision H:2011 | RELAYS, ELECTROMAGNETIC, 3 AMPERES, 4 PDT, TYPE 1 |
| MIL-DTL-12883-52 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components Socket Assembly for Relays, 2, 3, and 4-Pole, Track Mount (MIL-PRF-6106, MIL-PRF-83536, and MIL-PRF-83726) |
| MIL-PRF-6106-13 Revision F:2011 | RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, TYPE 1 |
| MIL-PRF-6106-33 Revision E:2011 | Relay, Electromagnetic, Type I, 400 Amperes, with 5 Ampere Auxiliary Contacts, Permanent Magnet Drive, Hermetically Sealed |
| MS24149 Revision F:2011 | RELAYS, ELECTROMAGNETIC, 2 PDT, 10 AMPERES, TYPE 1, HERMETICALLY SEALED |
| MS27751 Revision L:2017 | Relays, Electromagnetic, 50 Amperes, DC/60 Amperes AC, 3 PST or 3 PDT, Hermetically Sealed, Permanent Magnet Drive |
| MIL-DTL-12883-55 Revision A:2003 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS SOCKET FOR MIL-PRF-6106 RELAYS |
| MS25024 Revision J:2017 | Relay, 10AMP, 4PDT, Sealed, Class O |
| MS24172 Revision J:2003 | RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1 PST (N.O.), TYPE 3, NONHERMETICALLY SEALED |
| MS25035 Revision E:2011 | Relays, Electromagnetic, Type I, 25 Amperes, 1PST, Sealed, Class O |
| MS25270 Revision L:2012 | RELAYS, ELECTROMAGNETIC, 5 AMPERES, 6 PDT, TYPE 1, POTTED LEAD, HERMETICALLY SEALED |
| MIL-PRF-6106-56 Revision A:2013 | RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N.O.), TYPE 2, NON-HERMETICALLY SEALED, TRANSIENT SUPPRESSED DC COILS |
| MS25268 Revision K:2003 | RELAY, 5 AMP, 4 PDT, TYPE 1, HERMETICALLY SEALED, POTTED LEAD |
| MIL-HDBK-1646 Base Document:2016 | Selectionof Electrical Contacts, Connectors and Associated Servicing Tools |
| MIL-PRF-6106-10 Revision F:2011 | RELAY, ELECTROMAGNETIC, NORMALLY OPEN, CONTINUOUS DUTY, (INCLUDING UNSUPPRESSED AND SUPPRESSED COILS) 60 AMPERES, 3PST, ENVIRONMENTALLY SEALED |
| MIL-R-83726-27 Revision M:2016 | Relays, Hybrid, Time Delay, Voltage Sensitive, Delay on Drop-Out, Class A, Type V, Hermetically Sealed (Potted), SPDT, 2 Ampere, Track Mounted (No S/S Document) |
| MIL-DTL-12883-40 Revision F:2003 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, MIL-PRF-83726, AND MS27709) |
| MIL-PRF-6106-38 Revision D:2011 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 5 AMPERES, 2PDT, HERMETICALLY SEALED |
| MIL-PRF-6106-40 Revision D:2012 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 10 AMPERES, 3 PDT, HERMETICALLY SEALED |
| MIL-PRF-6106-19 Revision G:2011 | RELAY, ELECTROMAGNETIC PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY SEALED |
| MIL-R-6106-14 Revision D:2006 | RELAY, ELECTRIC, PERMANENT DRIVE, 50 AMP, SPDT (DB) DOUBLE MAKE DOUBLE BREAK AUXILIARY CONTACTS (5 AMP), HERMETICALLY SEALED |
| MIL-DTL-12883-47 Revision D:2003 | Socket, Plug-in Electronic Components, for Relays, 6-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MS27715 Revision C:2011 | RELAY, 150 AMP, 3 PST, N. O., TYPE 1, COIL AND CONTACTS INDIVIDUALLY SEALED |
| AN3308 Revision 6:2011 | Relay, 10 AMP, 3 PDT, Sealed, Connector Mounting, Class O |
| MS27750 Revision J:2016 | RELAYS, ELECTROMAGNETIC, 50 AMPERES, 3 PDT-NO., CENTER OFF, HERMETICALLY SEALED |
| MIL-DTL-12883-51 Revision B:2003 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726) |
| MS27749 Revision F:2012 | RELAYS, ELECTROMAGNETIC, 60 AMPERES, 3 PDT, MAGNETIC LATCH, HERMETICALLY SEALED |
| SAE ARP 1595 : 2013(R2019) | DESIGN AND VERIFICATION OF AIRCRAFT NOSE WHEEL STEERING SYSTEMS |
| DSCC 84192 : D | RELAYS, POWER, 100 AMPERES |
| MIL-STD-202-212 Base Document:2015 | Method 212, Acceleration |
| MIL-PRF-6106-38 Revision D:2011 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 5 AMPERES, 2PDT, HERMETICALLY SEALED |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
| MIL-STD-202-109 Base Document:2015 | Method 109, Explosion |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MS27742 Revision E:2003 | RELAYS, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, 25 AMPERES, 3 PDT, ALL WELDED, HERMETICALLY SEALED |
| MIL-STD-202-303 Base Document:2015 | Method 303, DC Resistance |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| SAE AS 25036 : 2015 | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE 2, CLASS 1, (FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE) |
| MIL-STD-750 Revision F:2011 | TEST METHODS FOR SEMICONDUCTOR DEVICES |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-PRF-6106-12 Revision F:2011 | RELAY, ELECTROMAGNETIC (TYPE 1), MAGNETIC LATCH, 25 AMPERES, 3PNO MAIN CONTACTS, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS, HERMETICALLY SEALED |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-PRF-6106-40 Revision D:2012 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 10 AMPERES, 3 PDT, HERMETICALLY SEALED |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-PRF-6106-19 Revision G:2011 | RELAY, ELECTROMAGNETIC PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY SEALED |
| MIL-STD-202-215 Base Document:2015 | METHOD 215, RESISTANCE TO SOLVENTS |
| SAE AS 20659 : 2015 | TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE 1, CLASS 1, FOR 175 DEGREES C OR 260 DEGREES C TOTAL CONDUCTOR TEMPERATURE |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| MIL-PRF-6106-20 Revision D:2011 | RELAYS, ELECTROMAGNETIC, MAGNETIC LATCH, 25 AMPERES, SPDT, HERMETICALLY SEALED |
| MIL-STD-202-310 Base Document:2015 | Method 310, Contact-Chatter Monitoring |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-PRF-6106-39 Revision G:2017 | RELAY, ELECTROMAGNETIC, TYPE 1, MAGNETIC LATCH, PERMANENT MAGNET DRIVE, LOW LEVEL TO 5 AMPERES, 4PDT, HERMETICALLY SEALED |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-202-312 Base Document:2015 | Method 312, Life, Intermediate Current Switching |
| MIL-PRF-6106-13 Revision F:2011 | RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, TYPE 1 |
| ASTM D 470 : 2013 : REDLINE | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| MIL-STD-202-112 Base Document:2015 | METHOD 112, SEAL |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
| MIL-STD-202-307 Base Document:2015 | Method 307, Contact Resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.