MIL-PRF-32565 Revision A:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION
Available format(s)
PDF
Superseded date
04-02-2019
Superseded by
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - Battery Interface Control Document and
SAE J1939 Messages
Includes general requirements for secondary (rechargeable) nominal 24 volt lithium-ion (Li-ion) batteries having the 6T form factor in accordance with STANAG 4015.
| Committee |
FSC 6140
|
| DocumentType |
Standard
|
| Pages |
260
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| SAE J 3124 : JUN 2018 | INDUSTRY REVIEW OF XEV BATTERY SIZE STANDARDS |
| SAE J 1939/81 : 2017 | NETWORK MANAGEMENT |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE J 2284-2 : 2016 | HIGH SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 250 KBPS |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| SAE J 1939/73 : 2016 | APPLICATION LAYER - DIAGNOSTICS |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| ISO 11898-2:2016 | Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| SAE J930_201605 | STORAGE BATTERIES FOR OFF-ROAD SELF-PROPELLED WORK MACHINES |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| SAE J 537 : 2016 | STORAGE BATTERIES |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| SAE AMSSTD595A:2017 | COLORS USED IN GOVERNMENT PROCUREMENT |
| MIL-STD-1275 Revision E:2013 | CHARACTERISTICS OF 28 VOLT DC INPUT POWER TO UTILIZATION EQUIPMENT IN MILITARY VEHICLES |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| SAE J 1939 : 2013 | SERIAL CONTROL AND COMMUNICATIONS HEAVY DUTY VEHICLE NETWORK - TOP LEVEL DOCUMENT |
| SAE J 1939/21 : 2016 | DATA LINK LAYER |
| SAE J 1939/31 : 2014 | NETWORK LAYER |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| SAE J 2464 : 2009 | ELECTRIC AND HYBRID ELECTRIC VEHICLE RECHARGEABLE ENERGY STORAGE SYSTEM (RESS) SAFETY AND ABUSE TESTING |
| GEIA STD 0005-1 : 2012 | PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| SAE J 1939/11 : 2016 | PHYSICAL LAYER, 250 KBPS, TWISTED SHIELDED PAIR |
| SAE J 1939/71 : 2016 | VEHICLE APPLICATION LAYER |
| SAE AS 478 : 2015 | IDENTIFICATION MARKING METHODS |
| SAE J 1939/14 : 2016 | PHYSICAL LAYER, 500 KBPS |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.