MIL-PRF-23648 Revision F:2005
Current
The latest, up-to-date edition.
Resistor, Thermal (Thermistor) Insulated, General Specification for
03-02-2005
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Defines the general requirements for general purpose insulated thermal resistors to be used for temperature compensation, control, and measurement over the temperature range specified.
| DevelopmentNote |
Supersedes MIL R 23648 (D). (10/2002)
|
| DocumentType |
Standard
|
| Pages |
185
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for general purpose insulated thermal resistors to be used for temperature compensation, control, and measurement over the temperature range specified.
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-24299 Revision B:2017 | Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard |
| MIL-PRF-23648-20 Revision C:2001 | Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style RTH44 |
| MIL-PRF-81757-14 Revision A:2003 | Battery, Storage, Aircraft, Nickel-Cadmium, 24-Volt, 5.5-Ampere-Hour, Low-Maintenance, Vented |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| MIL-PRF-23648-9 Revision C:2001 | Resistor, Thermal (Thermistor), Insulated Positive Temperature Coefficient Style RTH22 |
| MIL-PRF-23648-3 Revision E:2002 | Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style RTH10 |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MIL-PRF-23648-1 Revision E:2001 | Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style RTH06 |
| MIL-PRF-23648-2 Revision E:2002 | Resistor, Thermal (Thermistor), Insulated Negative Temperature Coefficient Style RTH08 |
| MIL-PRF-23648-19 Revision C:2001 | Resistor, Thermal (Thermistor), Hermetically Sealed, Positive Temperature Coefficient, Style RTH42 |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-107 Base Document : 2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL-STD-202-104 Base Document:2015 | Method 104, Immersion |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.