MIL-P-11268 Revision L:1983
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT
Available format(s)
PDF
Withdrawn date
30-08-1999
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
Outlines selection, approval for use, and application of materials, parts and processes in the design and construction of electronic equipment. A material, part or process is called an "item"
| Committee |
FSC GDRQ
|
| DevelopmentNote |
L NOTICE 1 - Notice of Inactivation for New Design L INT (1) NOTICE 1 - Notice of Cancellation of Interim Amendment 1 only - Not entire document L NOTICE 2 - Notice of Cancellation without replacement (07/2004)
|
| DocumentType |
Standard
|
| Pages |
79
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| MIL-R-49421 Revision A:1990 | Radiac Detector DT-236/PDR-75 (No S/S Document) |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL A 55288 : C | ANTENNA AS-1729/VRC |
| MIL-S-55689 Base Document:1969 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778()/GRC |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| MIL R 49293 : (2) | RADIAC SET AN/PDR-75 |
| MIL-A-55674 Revision A:1969 | ANTENNA GROUP AN/TRA-37() |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL-C-10479 Revision B:1969 | CRYSTAL IMPEDANCE METER TS 683/TSM |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL N 49064 : D | NIGHT VISION SIGHT, CREW SERVED WEAPON, AN/TVS-5 |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| MIL R 55672 : 0 | RADIOSONDE SET AN/AMT-4( ) (UNITS OF) |
| MIL P 49146 : B | POWER SUPPLY 18 MILLIMETER, MICROCHANNEL WAFER |
| MIL-T-52956 Revision A:1984 | TEST SET, POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-427 |
| MIL A 49295 : 0 | ANTENNA GROUP OE-303 ()/GRC |
| MIL-A-49067 Revision A:1984 | Air Traffic Control Central AN/TSW-7A (No S/S Document) |
| MIL-D-70789 Revision A:1992 | DYNAMIC REFERENCE UNIT (DRU) |
| MIL-A-55671 Revision A:1970 | ANTENNA AS-1425 ()/GRC |
| MIL-T-55402 Base Document:1974 | TRANSMITTER GROUP, SIMULATED RADIAC, HOT SPOT OT-52( )/T |
| MIL T 55248 : A | TEST SET, TELETYPEWRITER AN/UGM-1 ( ) |
| MIL F 55171 : A | FREQUENCY METER AN/USM-159()/U |
| MIL P 49080 : A | POWER SUPPLY PP-6224( )/U |
| MIL A 14399 : B | ANALYZER, SPECTRUM AN/UPM-58() |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| MIL-A-12636 Revision B:1969 | ANALYZER ZM-3/U |
| MIL-I-49394 Revision A:1991 | Interrogator Set AN/TPX-46A (V) 7 (No S/S Document) |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| MIL-M-10670 Revision A:1952 | MONITORING SET, TELEPHONE [MONITORING EQUIPMENT] AN/PTA-1] |
| MIL P 49163 : A | PREAMPLIFIER, VIDEO AM-6923/UA |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| MIL-HDBK-1857 Base Document:1998 | Grounding, Bonding and Shielding Design Practices |
| MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-P-49452 Base Document:1989 | POWER SUPPLY 18 MM, MICROCHANNEL WAFER, GEN III, MX-10130()/UV |
| MIL P 11220 : C | PLOTTING BOARD ML-122 |
| MIL-R-55499 Revision B:1974 | RADIO SET AN/PRC-77 ( ) ( UNITS OF) |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-D-11554 Revision A:1953 | DYNAMOTOR POWER SUPPLY DY-88/GRC-9 |
| MIL-T-52957 Revision A:1978 | TEST SET, POWER SUPPLY FOR POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-428 |
| MIL I 49052 : F | IMAGE INTENSIFIER ASSEMBLY, 18 MILLIMETER MICROCHANNEL WAFER MX9916/UV |
| MIL D 55361 : 0 | DETECTOR, TRACKING SERVO BRIDGE |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL T 11656 : B | TEST SET, ELECTRICAL METER TS-682()/GSM-1 |
| MIL-P-55151 Revision B:1973 | POWER SUPPLY PP-1104 ( )/G |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL-M-13130 Revision C:1972 | METER, AUDIO LEVEL TS-585(/U) |
| MIL-R-55615 Revision B:1984 | RADIACMETER 1M-174( ) PD |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| MIL I 49173 : A | IMAGER, OPTICAL SU-103A/UA |
| MIL-D-12195 Revision D:1984 | DRIER, PHOTOGRAPHIC FILM EL-4/U |
| MIL-A-55680 Revision B:1991 | Antenna AT-1108( )/ARC |
| MIL P 49151 : C | POWER ADAPTER ASSEMBLY VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V) |
| MIL L 49367 : B | LENS ASSEMBLY, OBJECTIVE, 155MM AN/TVS-5 |
| MIL S 49168 : B | SCAN-INTERLACE PL-1403/UA, PL-1403A/UA |
| MIL R 49176 : A NOTICE 1 | REGULATOR, VOLTAGE, BIAS CN-1503/UA |
| MIL-A-49425 Base Document:1989 | AVIATORS NIGHT VISION IMAGING SYSTEM AN/AVS-6(V)1, AN/AVS-6(V)2 |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL P 52955 : A | POSITION & AZIMUTH DETERMINING SYSTEM (PADS), AN/USQ-70(U) |
| MIL-A-49273 Base Document:1988 | AMPLIFIER, POWER SUPPLY AM-7152/GRC-213 & ADAPTER KIT, VEHICLE MK-2154/GRC-213 |
| MIL-L-11296 Revision B:1966 | LIGHT ASSEMBLIES, ELECTRIC MX-129 ((/PAQ & MX-1292) (/PAQ) |
| MIL-H-49161 Base Document:1978 | HEADSET MICROPHONE KIT MK 1697 ()/G |
| MIL-P-10653 Revision D:1972 | POWER SUPPLY [PLATE SUPPLY TIMER UNIT PE 244] |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| MIL-A-55138 Revision B:1965 | ANTENNA AT-784()/PRC |
| MIL-T-55431 Revision A:1968 | TEST SET, BATTERY AN/PSM-13 ( ) |
| MIL-T-55691 Base Document:1953 | TEST SET, BATTERY AN/USM-63 ( ) /U |
| MIL-M-49123 Base Document:1977 | MICROPHONE M-161((/TNS-10 |
| MIL-H-49448 Base Document:1988 | HUMIDITY SENSOR, RESISTANCE |
| MIL-C-14468 Base Document:1957 | CONVERTER, TELEPHONE SIGNAL (CONVERTER TA-187()/U) |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-R-10159 Revision E:1969 | RAWIN SET AN/GMD 1 [UNITS OF] |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL-H-49225 Base Document:1980 | HEADSET MICROPHONE KIT MK-896A/AIC (COMPONENTS OF) |
| MIL A 49204 : A NOTICE 1 | ANTENNA GROUP OE254/GRC |
| MIL L 12626 : NOTICE 1 | LIGHT, SIGNAL (SIGNAL LAMP EQUIPMENT SE-11-()) |
| MIL-R-12405 Revision D:1982 | RECORDER, WIND DIRECTION AND SPEED, RO-2/GMQ |
| MIL-B-55087 Revision B:1982 | BALLOON, METEROLOGICAL, ML-537()/UM |
| MIL-P-10476 Revision C:1984 | PRINT WASHER, PHOTOGRAPHIC, EK 1 |
| MIL L 49147 : C | LENS ASSEMBLY, EYEPIECE VIEWER, DRIVERS' NIGHT VISION, AN/VVS-2(V) |
| MIL N 49063 : D | NIGHT VISION SIGHT, INDIVIDUAL SERVED WEAPON, AN/PVS-4 |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| MIL-R-49016 Revision A:1981 | RECODER, CODE MATRIX BLOCK LA-434() |
| MIL H 49198 : A | HEADSET-MICROPHONE KIT, MK-1564( )/AIC |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| MIL-B-11839 Revision D:1982 | BAROMETER, ANEROID ML-434/PM |
| MIL R 49404 : LATEST | REGULATOR, VOLTAGE, BIAS CN-1559/UA |
| MIL T 49431 : 0 | TEST SET, ELECTRONIC SYSTEM AN/UKM-4()& ADAPTOR, TEST MX-10062/U |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-G-55210 Base Document:1963 | GENERATOR, THERMAL NOISE SG-419 ( ) /U |
| MIL V 49082 : D | VIEWER, DRIVER S, NIGHT VISION, AN/VVS-2 |
| MIL-T-55523 Base Document:1966 | TEST FIXTURE SETS, ELECTRONIC |
| MIL-T-12242 Revision A:1963 | TEST SET, TELEPHONE TS-716( )/U |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| MIL-C-14255 Revision A:1960 | CENTRAL OFFICE, TELEPHONE MANUAL AN/TTC-7() |
| MIL-H-49195 Base Document:1979 | HEADSET MICROPHONE KIT MK 1974 ()/VRC |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL-M-55623 Revision A:1984 | Meter, Volume, Hydrogen-Helium ML-605( )/U (No S/S Document) |
| MIL-A-49263 Base Document:1982 | ANTENNA AS-2731()/GRC |
| MIL I 49384 : A NOTICE 1 | IMAGER, OPTICAL SU-121/UA |
| MIL-W-55056 Revision C:1982 | WIND MEASURING SET AN/PMQ-6 (UNITS OF) |
| MIL C 49175 : B | COOLER, CRYOGENIC, MECHANICAL HD-1033B/UA AND HD-1033C/UA |
| MIL C 49308 : 0 | COOLER DEWAR GROUP, OR 334/V, OR 335/V |
| MIL-PRF-49167 Revision B:1997 | AUXILIARY CONTROL, VIDEO PL-1402/UA |
| MIL L 49366 : B | LENS ASSEMBLY, OBJECTIVE, 95MM AN/PVS-4 |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| MIL-T-12400 Revision A:1969 | TEST SET, BATTERY TS-776/U |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| MIL-C-55211 Revision B:1969 | CHARGER, BATTERY, PP-1451( ) /G |
| MIL-M-55143 Revision A:1966 | MOTOR GENERATOR PU-126 ( ) /U (ROTARY CONVERTER) |
| MIL I 49040 : E | IMAGE INTENSIFIER ASSEMBLY 25 MILLIMETER, MICROCHANNEL INVERTER MX-9644/UV |
| MIL-N-49098 Revision A:1990 | NAVIGATIONAL SET, DOPPLER AN/ASN-128()(XE-2) |
| MIL-Q-10194 Revision D:1969 | Q METER TS617/U |
| MIL-T-12333 Revision C:1969 | TEST SET, CRYSTAL UNIT, QUARTZ TS-710/TSM |
| MIL H 55460 : A | HEADSET-MICROPHONE H-182()/PT |
| MIL-T-0012756 Revision B:1969 | TEST SET, BATTERY (BATTERY TESTER TS 183 () U) |
| MIL-T-55441 Base Document:1967 | TOWER AB-585()/G |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL E 49150 : D | ENTRANCE HOUSING ASSEMBLY VIEWER, DRIVERS, NIGHT VISION, AN/VVS-2(V) |
| MIL-A-29423 Base Document:1986 | ANTENNA: AS-()/GRC; MICROWAVE |
| MIL-T-12681 Revision A:1955 | TEST SET, TELEPHONE (TEST SET TS-190)(/U) |
| MIL E 49149 : C | ELECTRONIC CONTROL ASSEMBLY VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V) |
| MIL-G-49313 Base Document:1989 | GOGGLES, NIGHT VISION |
| MIL-R-13029 Revision C:1992 | RADIACMETER IM-93/UD RADIACMETER IM-147/PD |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL E 55119 : A | ELECTRO ACOUSTICAL TRANSDUCER EQUIPMENTS |
| MIL T 49316 : LATEST | TEST SET, ELECTRONIC SYSTEMS |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| MIL-E-29581 Base Document:1991 | EARCUP, UNIT ACTIVE NOISE REDUCTION SYSTEM |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| MIL-T-49057 Revision A:1983 | TEST SET, IFF INTERROGATOR AN/TPM-25A |
| MIL-T-49435 Base Document:1983 | TEST SET,LASER DETECTING AN/UPM-148() |
| MIL-W-12404 Revision E:1970 | WIND MEASURING SET AN/GMQ-11 (UNITS OF) |
| MIL-G-49460 Base Document:1986 | GENERATOR, DIRECT CURRENT: G-76B/G |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| MIL-H-58108 Base Document:1986 | HEADSET-MICROPHONE KIT MK-2193/AIC |
| MIL-G-49274 Base Document:1984 | Generator, Digital Data SG-1139 ( )/G (No S/S Document) |
| MIL L 49434 : NOTICE 1 | LIGHT, AIMING, INFRARED AN/PAQ-4 |
| MIL H 55535 : 0 | HEADSET MICROPHONE KIT MK-1039/G |
| MIL-G-49312 Base Document:1989 | GOGGLES, NIGHT VISION AN/PVS-7A |
| MIL-T-49388 Revision A:1983 | TRAY ASSEMBLY, BATTERY CHARGING MX-10154 |
| MIL-M-49275 Base Document:1987 | MASTS, QUICK ERECT, EXPANDABLE AB-1309(V)/TRC |
| MIL-P-49115 Revision A:1977 | PLATOON EARLY WARNING SYSTEM AN/TRS-2() |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL-P-49090 Revision D:1992 | POWER SUPPLY 25 MILLIMETER, MICROCHANNEL INVERTER |
| MIL-A-55147 Revision B:1970 | AMPLIFIER-POWER SUPPLY GROUP OA-3633()/GRC |
| MIL-F-55614 Revision B:1976 | FILTER, INFRARED INTERFERENCE-TYPE (PINK) FOR SEARCHLIGHT, INFRARED 28-VOLT, 110-AMPERE |
| MIL-H-55351 Base Document:1971 | HEADSET-MICROPHONE KIT MK-1564()/AIC (COMPONENTS OF) |
| MIL T 0014358 : B | TELEPHONE SET TA-312()/PT |
| MIL-T-13626 Revision B:1976 | TELEPHONE SET TA-1()/PT |
| MIL S 49166 : A | SCANNER, MECHANICAL, MX-9872(V)/UA, GENERAL SPECIFICATION FOR |
| MIL-L-49427 Base Document:1989 | LENS ASSEMBLY, EYEPIECE FOR AVIATORS NIGHT VISION IMAGING SYSTEM |
| MIL-STD-1857 Base Document:1976 | GROUNDING, BONDING AND SHIELDING DESIGN PRACTICES |
| MIL-T-49243 Revision A:1988 | Test Set, Telephone, TS-3647/G (No S/S Document) |
| MIL-I-55633 Base Document:1968 | INDICATOR, PANORAMIC IP-173 ( )/U |
| MIL-T-49269 Base Document:1984 | TEST SET, RADIO, AN/PRM-34 |
| MIL-T-12424 Revision D:1968 | TEST SET, ELECTRON TUBE TV-7 ()/U |
| MIL-P-12965 Base Document:1953 | POWER SUPPLY (RECTIFIER POWER UNIT RA-61) AND MOUNTING FT-414 |
| MIL-T-11157 Revision B:1963 | THEODOLITE, DOUBLE CENTER ML-474/GM |
| MIL A 49314 : 0 | ANTENNAS, UHF SATCOM, PORTABLE, FOLDABLE (LIGHT WEIGHT, MEDIUM WEIGHT & HEAVY DUTY), GENERAL SPECIFICATION FOR |
| MIL T 55103 : A NOTICE 1 | SPECIFICATION FOR TEST SET, ELECTRICAL POWER AN/UPM-93() |
| MIL-T-49110 Base Document:1977 | TELEPHONE SET TA-838 ()/TT |
| MIL-T-49117 Base Document:1977 | TEST SET, RECEIVER TS-3565( )/TRS-2 |
| MIL-R-10882 Revision D:1969 | RECORDED, RADIOSONDE AN/TMQ-5 (UNITS OF) |
| MIL-C-49085 Base Document:1976 | CHARGER, BATTERY PP-7311/PAS-7 |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| MIL-M-14274 Revision A:1975 | MULTIPLIER, ELECTRICAL INSTRUMENT TS-265/UP |
| MIL-B-52371 Revision A:1971 | BINOCULARS, ELECTRONIC AN/PAS-5 |
| MIL H 11134 : F | HANDSET, H-33/PT |
| MIL-T-49305 Base Document:1989 | Test Set, Countermeasure Set TS-3609( )/ALQ-156(V) (No S/S Document) |
| MIL T 49318 : 1991-11-21 | TEST SET, ELECTRONIC SYSTEMS |
| MIL-A-49277 Base Document:1985 | AMPLIFIER, AUDIO FREQUENCY AM-1780A/VRC |
| MIL L 49148 : C | LENS ASSEMBLY, OBJECTIVE VIEWER, DRIVERS NIGHT VISION, AN/VVS-2(V) |
| MIL L 49368 : B | LENS ASSEMBLY, EYEPIECE, AN/PVS-4 & AN/TVS-5 |
| MIL-L-49426 Base Document:1989 | LENS ASSEMBLY, OBJECTIVE FOR AVIATORS NIGHT VISION IMAGING SYSTEM |
| MIL-C-10147 Revision D:1984 | CABINET, PHOTOGRAPHIC STORAGE, FILM BM-11( ) |
| MIL-R-55216 Base Document:1962 | RADIOSONDE TEST SET TS-1348 ( ) GMM-1 |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL C 10392 : C | CORD, ELECTRICAL (AUDIO, MINIATURE) |
| L-P-1035 Revision A:1974 | PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE VINYL ACETATE COPOLYMER, RIGID |
| MIL-I-23264 Revision A:1968 | Insulators, Ceramic, Electrical and Electronic, General Specification for |
| MIL-P-22296 Revision B:1973 | PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN) HEAVY WALLED |
| MIL-S-23190 Revision E:1986 | STRAPS, CLAMPS AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT |
| MIL-I-8846 Revision D:1994 | INSERT, SCREW THREAD, HELICAL COIL |
| MIL-P-46120 Revision B:1983 | PLASTIC MOLDING AND EXTRUSION MATERIAL POLYSULFONE |
| DOD STD 35 : D | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM |
| MIL C 22520 : F | CRIMPING TOOLS, TERMINAL HAND OR POWER ACTUATED, WIRE TERMINATION AND TOOL KITS - GENERAL SPECIFICATION FOR |
| MIL-STD-481 Revision B:1988 | CONFIGURATION CONTROL, ENGINEERING CHANGES, DEVIATIONS AND WAIVERS (SHORT FORM) |
| MIL-I-22129 Revision C:1962 | INSULATION TUBING, ELECTRICAL, POLYTETRAFLUOROETHYLENE RESIN, NONRIGID (SEE ASTM D 3295) |
| MIL-C-19547 Revision B:1969 | CABLE, ELECTRICAL, SPECIAL PURPOSE, SHORE USE |
| MIL-S-45915 Revision A:1967 | STUD, LOCKED IN - KEY LOCKED - GENERAL SPECIFICATION FOR |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| FF-S-210 Revision B:1981 | SETSCREWS, SQUARE HEAD (INCH) AND SLOTTED HEADLESS (INCH AND METRIC) |
| MIL F 15160 : G | FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR |
| MIL S 83731 : A | SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR |
| MIL-P-18324 Revision D:1964 | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| L-P-513 Revision C:1968 | PLASTIC SHEET AND INSULATION SHEET, ELECTRICAL (LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN) |
| MIL C 10581 : LATEST | CABLE, TELEPHONE WF-8/G |
| MIL M 16034 : A | METER, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES) |
| MIL-M-38527 Revision D:1992 | MOUNTING PADS, ELECTRICAL-ELECTRONIC COMPONENT, GENERAL SPECIFICATION FOR |
| MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
| L-P-393 Revision A:1964 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| L-P-383 Base Document:1967 | PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED |
| MIL-W-81822 Revision A:1982 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| MIL C 8073 : D | CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED CLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS |
| L-P-504 Revision E:1991 | PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL L 3890 : A | LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC] |
| MIL-C-3093 Revision A:1949 | CABLE, TELEPHONE INSIDE DISTRIBUTION WIRING [WD-15/U, WF-9/U AND WT-3/U) |
| MIL F 16552 : E | FILTER, AIR ENVIRONMENTAL CONTROL SYSTEM, CLEANABLE, IMPINGEMENT (HIGH VELOCITY TYPE) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL A 55339 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES & WITHIN SERIES) GENERAL SPECIFICATION FOR |
| MIL C 27599 : B | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR |
| MS35335 Revision G:2004 | WASHER, LOCK, FLAT EXTERNAL TOOTH (IN./MM) |
| MIL C 13777 : G | CABLE, SPECIAL PURPOSE, ELECTRICAL, CONDUCTORS GENERAL SPECIFICATION FOR |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET & STRIP, POLYMIDE |
| MIL-P-40619 Revision B:1991 | PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) |
| MIL-STD-1130 Revision C:2012 | Connections, Electrical, Solderless Wrapped |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| L-P-397 Revision C:1977 | PLASTIC MOLDING MATERIAL CELLULOSE ACETATE |
| MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
| MIL-STD-275 Revision E:1984 | PRINTED WIRING - ELECTRONIC EQUIPMENT |
| MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
| MIL C 17 : G | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-P-15047 Revision C:1971 | PLASTIC MATERIAL, LAMINATED THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN |
| MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
| MIL-S-61 Revision B:1959 | SHUNTS, INSTRUMENT, EXTERNAL, 50 MILLIVOLT (LIGHTWEIGHT TYPE) |
| DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
| MIL C 55036 : A | CABLE, TELEPHONE WM-130( )/G |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| MIL-I-45914 Revision A:1991 | INSERT, SCREW THREAD - LOCKED IN, KEY LOCKED |
| L-P-506 Revision A:1963 | PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-STD-199 Revision E:1991 | RESISTOR, SELECTION AND USE OF |
| DOD STD 1686 : 0 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)(METRIC) |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-V-173 Revision C:1969 | VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONICS, AND ASSOCIATED EQUIPMENT) |
| MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
| MIL-P-46161 Revision A:1976 | PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED |
| L-P-380 Revision C:1973 | PLASTIC MOLDING MATERIAL METHACRYLATE |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-C-10065 Revision B:1966 | CABLE, SPECIAL PURPOSE, ELECTRICAL, (MULTIPAIR, AUDIO FREQUENCY) |
| MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| L-P-394 Revision B:1968 | PLASTIC MOLDING MATERIAL (PROPYLENE PLASTICS, INJECTION AND EXTRUSION) |
| O-L-164 Revision D:1970 | LEATHER DRESSING, MILDEW-PREVENTIVE |
| MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
| MIL P 19468 : A | PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED & EXTRUDED |
| MIL-STD-750 Revision F:2011 | TEST METHODS FOR SEMICONDUCTOR DEVICES |
| MIL-P-10971 Revision E:1969 | PIN, SPRING, TUBULAR (COILED AND SLOTTED) |
| MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| MIL-STD-1277 Revision B:1983 | SPLICES, TERMINALS, TERMINAL BOARDS, BINDING POSTS, TERMINAL JUNCTION SYSTEMS, WIRE CAPS; ELECTRICAL |
| MIL F 2312 : F | FELT, HAIR OR WOOL, MILDEW RESISTANT, AND MOISTURE RESISTANT TREATMENT FOR |
| MIL-I-1361 Revision C:1985 | INSTRUMENT AUXILIARIES, ELECTRICAL MEASURING, SHUNTS, RESISTORS, AND TRANSFORMERS |
| MIL-STD-417 Revision A:1976 | CLASSIFICATION SYSTEM AND TESTS FOR SOLID ELASTOMERIC MATERIALS |
| MIL C 3883 : A | CORD, ELECTRICAL, SHIELDED [AUDIO FREQUENCY] |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| MIL C 55668 : A | CORD, ELECTRICAL AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT) |
| L-P-399 Revision B:1970 | PLASTIC MOLDING MATERIAL, ION MATERIAL, STYRENE ACRYLONITRILE COPOLYMERS |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| MIL-T-43435 Revision B:1974 | TAPE, LACING, AND TYING |
| MIL-R-27777 Revision B:1973 | RELAY, TELEGRAPH, PASSIVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| L-P-1041 Revision A:1973 | PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER |
| MIL-I-10 Revision B:1966 | INSULATING COMPOUND ELECTRICAL CERAMIC CLASS 1 |
| MIL C 39012 : C | GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS |
| MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
| MIL S 8834 : F | SWITCH, TOGGLE, POSITIVE BREAK, GENERAL SPECIFICATION FOR |
| MIL-P-15035 Revision C:1962 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN |
| MIL C 83503 : A | CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR |
| MIL-C-55357 Base Document:1971 | CABLE, TELEPHONE, SHIELDED (INSIDE WIRING) |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MIL C 13273 : 0 | CORD, ELECTRICAL (RETRACTILE, 2, 3, AND 4 CONDUCTOR, WD-9/U, WT-2/U, WF-4/U) |
| MIL-P-18177 Revision C:1960 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY RESIN |
| MIL-M-24325 Base Document:1968 | MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS THERMOSETTING |
| MIL-HDBK-216 Base Document:1962 | R.F. Transmission Lines and Fittings (Future Acquisitions may refer to EIA-979) |
| MIL-STD-965 Revision B:1993 | PARTS CONTROL PROGRAM |
| MIL-P-19161 Revision A:1956 | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN |
| DOD HDBK 263 : LATEST | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)METRIC |
| MIL C 55365 : C (5) | CAPACITOR, CHIP, FIXED, TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| L-P-523 Revision D:1979 | PLASTIC SHEET AND FILM, FEP-FLUOROCARBON, EXTRUDED |
| J-W-1177 Revision B:1988 | WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION |
| L-P-398 Revision B:1973 | PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE |
| MIL-C-10544 Revision C:1962 | CONNECTORS, PLUG & RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED) |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL P 8184 : E | PLASTIC SHEET, ACRYLIC, MODIFIED |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
| CCC-C-419 Revision G:1989 | CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED |
| MIL C 55181 : C | CONNECTOR, PLUG & RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF) TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-C-3133 Revision C:1976 | CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED |
| MIL C 3098 : G | CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR |
| L-P-1183 Revision B:1977 | PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID |
| MIL-STD-143 Revision B:1969 | STANDARDS, AND SPECIFICATIONS ORDER OF PRECEDENCE FOR THE SELECTION OF |
| MIL C 22992 : E | CONNECTOR, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE GENERAL SPECIFICATION FOR |
| MS91528 Revision J:1984 | KNOB CONTROL PLASTIC (ROUND CONCENTRIC POINTER SPINNER, SPINNER SLIP CLUTCH BAR, TACTILE KNOB LOCK POINTER AND KNOB LOCKS |
| MIL-B-16540 Revision B:1969 | BRONZE, PHOSPHOR: CASTINGS |
| MIL C 3432 : F | CABLE, [POWER AND SPECIAL PURPOSE] AND WIRE ELECTRICAL [300 AND 600 VOLTS] |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL M 20693 : A | MOLDING PLASTIC, POLYAMIDE (NYLON), RIGID |
| MIL-P-20700 Revision A:1965 | PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE |
| MIL I 23053/5 : B | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL R 39016 : E | RELAY, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL-STD-252 Revision B:1970 | CLASSIFICATION OF VISUAL AND MECHANICAL DEFECTS FOR EQUIPMENT, ELECTRONIC, WIRED, AND OTHER DEVICES |
| MIL S 3950 : F | SWITCH, TOGGLE ENVIRONMENTALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-P-46129 Revision A:1975 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-P-25518 Revision B:1981 | Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated |
| MIL C 49055 : B | CABLE, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
| MIL-P-15037 Revision E:1965 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS CLOTH, MELAMINE RESIN |
| MIL R 6106 : J | RELAYS, ELECTROMAGNETIC [INCLUDING ESTABLISHED RELIABILITY [ER] TYPES |
| MIL-STD-198 Revision E:1984 | CAPACITOR, SELECTION AND USE OF |
| MIL S 19500 : J | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-V-95 Revision B:1989 | VIBRATOR, INTERRUPTER AND SELF RECTIFYING |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL C 55021 : B | CABLE, ELECTRICAL, SHIELDED SINGLES, SHIELDED AND JACKETED SINGLES, TWISTED PAIRS AND TRIPLES, INTERNAL HOOKUP |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DOD-D-1000 Revision B:1977 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL-P-25515 Revision C:1968 | PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBER BASE, LAMINATED |
| FF-S-111 Revision D:1974 | SCREW, WOOD |
| MIL P 15024/8 : 0 | PLATE, TAGS AND BANDS, BAND IDENTIFICATION, CABLE ASSEMBLY, TYPE K2 HEAT SHRINKABLE TUBING |
| MIL C 55681 : D SUPP 1 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED UNENCAPSULATED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 3655 : C | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR |
| MIL-STD-482 Revision A:1974 | CONFIGURATION STATUS ACCOUNTING DATA ELEMENTS AND RELATED FEATURES |
| L-P-349 Revision C:1971 | PLASTIC MOLDING AND EXTRUSION MATERIAL, CELLULOSE ACETATE BUTYRATE |
| ASTM D 787 : 2012-08 | SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS |
| MIL C 55446 : A NOTICE 2 | CABLE, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED |
| MIL-F-14256 Revision F:1993 | FLUX, SOLDERING, LIQUID (ROSIN BASE) |
| MIL-P-15024-6 Revision A:1977 | PLATE, IDENTIFICATION |
| MIL S 55620 : 0 | SUBSTRATES, CERAMIC, FOR DEPOSITION OF THIN FILM MICROCIRCUITS |
| MIL P 642 : D | PLUG, TELEPHONE AND ACCESSORY SCREWS, GENERAL SPECIFICATION FOR |
| MIL-STD-1346 Revision C:1994 | RELAY, SELECTION AND APPLICATION |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| CCC-D-950 Revision F:1989 | DYEING AND AFTER TREATING PROCESSES FOR COTTON CLOTHS |
| W-C-596 Revision H:2014 | CONNECTOR, ELECTRICAL, POWER, GENERAL SPECIFICATION FOR |
| MIL C 3849 : B | CORD, ELECTRICAL (TINSEL) |
| MIL R 55342 : C | RESISTORS, FIXED, FILM, CHIP, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-T-22361 Base Document:1960 | THREAD COMPOUND, ANTISEIZE, ZINC DUST-PETROLATUM |
| MIL-T-12664 Revision B:1965 | TREATMENT, FUNGUS RESISTANT, PARANITROPHENOL, FOR CORK PRODUCTS |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| QQ-B-750 Base Document:1961 | BRONZE, PHOSPHOR, BAR, PLATE, ROD, SHEET, STRIP, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS |
| MIL C 26482 : G | CONNECTOR, ELECTRICAL (CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| MIL-M-24519 Revision E:1992 | MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL T 713 : E | TWINE, FIBROUS, IMPREGNATED, LACING AND TYING |
| MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-STD-1286 Revision D:1987 | TRANSFORMER, INDUCTORS, AND COILS SELECTION AND USE OF |
| MIL O 55310 : C | OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-P-22324 Revision A:1962 | |
| MIL-G-20098 Revision C:1969 | Gypsum, Calcined |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| L-P-535 Revision E:1979 | PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID |
| MIL J 641 : E | JACK, TELEPHONE, GENERAL SPECIFICATION FOR |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL P 55110 : LATEST | PRINTED WIRING BOARD, RIGID GENERAL SPECIFICATION FOR |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| MIL C 55074 : F | CONNECTOR, PLUG AND RECEPTACLE, TELEPHONE, ELECTRICAL, SUBASSEMBLY AND ACCESSORIES AND CONTACT ASSEMBLY, ELECTRICAL GENERAL SPECIFICATION FOR |
| MIL C 27072 : B | CABLE, POWER, ELECTRICAL & CABLE, SPECIAL PURPOSE ELECTRICAL, MULTICONDUCTOR & SINGLE-SHIELDED - GENERAL SPECIFICATION FOR |
| MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| L-P-385 Revision C:1974 | PLASTIC MOLDING MATERIAL, ION MATERIAL, POLYCHLOROTRIFLUOROETHYLENE |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| MIL-I-631 Revision D:1961 | INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| F-F-300 Revision B:1982 | FILTER, AIR CONDITIONING, VISCOUS IMPINGEMENT AND DRY TYPES, CLEANABLE |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| MIL-STD-681 Revision F:2012 | IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE |
| MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
| NN-P-530 Revision E:1977 | PLYWOOD, FLAT PANEL |
| MIL-O-39021 Revision A:1970 | OVEN, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-M-14 Revision H:1990 | MOLDING COMPOUNDS, THERMOSETTING |
| MIL-C-55243 Base Document:1963 | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL, QUICK CONNECT AND DISCONNECT, 12 CONTACTS MEDIUM POWER |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| MIL-C-3884 Revision B:1990 | CORD, ELECTRICAL (SHORT LAY) |
| C-F-202 Revision F:1985 | FELT SHEER (HAIR) AND FELT ROLL (HAIR) |
| MIL-STD-683 Revision G:1992 | CRYSTAL UNITS (QUARTZ)AND CRYSTAL HOLDERS (ENCLOSURES), SELECTION OF |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| L-P-396 Revision B:1975 | PLASTIC MOLDING MATERIAL, ION MATERIAL, POLYSTYRENE |
| MIL-P-21347 Revision D:1977 | |
| MIL-I-81969 Revision B:1982 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| MIL-C-92 Revision B:1969 | CAPACITORS, VARIABLE, AIR DIELECTRIC (TRIMMER) GENERAL SPECIFICATION FOR |
| MIL-M-13231 Revision C:1988 | MARKING OF ELECTRONIC ITEMS |
| MIL-P-3409 Base Document:1951 | Plastic-Material, Molding Rigid Thermoplastic, Polydichlorostyrene; for use in Electronic, Communications, and Allied Electrical Equipment |
| MIL-STD-1498 Revision B:1985 | CIRCUIT BREAKERS SELECTION AND USE OF |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| MIL R 28776 : C | RELAY, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.