MIL L 46010 : D
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
Available format(s)
PDF
Language(s)
English
Publisher
Superseded date
26-05-1997
Superseded by
$33.64
Including GST where applicable
NO CONTENTS SECTION
Specifies two types of heat cured solid film lubricants to reduce wear and prevent corrosion, galling and seizure of metals.
| Committee |
FSC 9150
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-N-85615-10 Base Document:1989 | Nut, Self-Sealing, Self-Locking, CRES, 160 KSI FTU, 250 Deg. F and 450 Deg. F |
| MIL-A-55674 Revision A:1969 | Antenna Group AN/TRA-37( ) (No S/S Document) |
| MIL-B-85667-6 Revision A:1991 | BOLT, SLEEVE, 100 DEGREES REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 450 DEGREES F |
| MIL C 28748/6 : D | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE SOCKET CONTACTS, SIZE 2O |
| MIL-STD-193 Revision L:1991 | Painting, Procedures and Marking for Vehicles, Construction Equipment, Material Handling Equipment, and Spare Parts |
| MIL-B-85667 Revision A:1991 | BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD GENERAL SPECIFICATION FOR |
| MIL B 85667/3 : A | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 220 KSI FTU |
| PREN 3244 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| PREN 3248 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ADAPTERS, REDUCED PIPE END WITH LOCKING RING |
| PREN 3266 : 200P2 | AEROSPACE SERIES - PIPE COUPLING IN TITANIUM ALLOY - BULKHEAD NUTS |
| MIL-B-85667-2 Revision A:1991 | BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 125 KSI FSU |
| PREN 4233 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, WELDED, THREADED |
| PREN 3246 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD |
| PREN 4022 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, WELDED |
| PREN 4193 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD LONG |
| PREN 4189 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD BRANCH, LONG |
| PREN 4194 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD |
| PREN 4192 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH |
| PREN 4185 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD LONG |
| PREN 4027 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BRANCH WITH SWIVEL NUT |
| PREN 4026 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES |
| PREN 4021 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD |
| PREN 4186 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - CROSS UNIONS |
| SAE J2271M_201508 | Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) |
| ASTM D 2510 : 1994 : R2012 | Standard Test Method for Adhesion of Solid Film Lubricants |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-N-45938 Revision A:1995 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, GENERAL SPECIFICATION FOR (S/S BY NASM45938) |
| MIL-B-23964 Revision D:1981 | Bolt, Self-Retaining, Positive Locking (S/S by NASM23964) |
| MIL-F-81177 Revision E:1984 | Fastener, Blind, High Strength, Installation Formed, Alloy Steel, General Specification for (S/S by NASM81177) |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-N-85730 Base Document:1988 | NUT, SELF-LOCKING, SPLINE DRIVE, ASSEMBLED WASHER, NICKEL ALLOY 718, 220 KSI FTU, 900 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-C-6818 Revision D:1973 | Clamp, Instrument Mounting, Aircraft (S/S by NASM6818) |
| MIL-F-8975 Revision B:1982 | Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant Steel, Heat Resistant Steel and Titanium, General Specification for (S/S by NASM8975) |
| MS20604 Revision K:1995 | RIVET, BLIND, NONSTRUCTURAL, UNIVERSAL HEAD, CLASS 1 (S/S BY NASM20604) |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-F-8961 Revision A:1992 | Fastener Element, Self-Locking, Externally Threaded, 450 Degrees Fahrenheit and 1,200 Degrees Fahrenheit |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES (S/S BY MIL-HDBK-1250) |
| MIL C 28748/5 : D | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 2O |
| MIL-HDBK-1250 Revision A:1995 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies (S/S by AS12500) |
| ASTM D 2510 : 1994 : R1998 | Standard Test Method for Adhesion of Solid Film Lubricants |
| MIL-STD-2131 Revision A:1991 | Launcher, Ejection, Guided Missile, Aircraft, General Design Criteria for |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| PREN 3245 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, REDUCER |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| PREN 3566 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ADAPTERS WITH LOCKING RING |
| PREN 4029 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES BULKHEAD BRANCH |
| PREN 4028 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, SWIVEL NUT ON RUN |
| 96/712318 DC : DRAFT SEP 1996 | PREN 3079 - AEROSPACE SERIES - ADAPTORS WITH LOCKING RING UP TO 2800 KPA - TECHNICAL SPECIFICATION |
| DOD-N-70333 Base Document:1985 | Nut, Plain and Self-Locking, Clinch, Metric (Self-Clinching, Knurled Collar) Fixed and Floating, General Specification for (No S/S Document) |
| MIL-B-85667-10 Base Document:1991 | BOLT, SLEEVE, 100 DEGREES TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 160 KSI FTU, 450 DEGREES F |
| MIL-N-85615-8 Base Document:1989 | Nut, Self-Sealing, Self-Locking, Alloy Steel, 125 KSI FTU, 250 Deg. F and 450 Deg. F |
| NASA KSC TM 584 : 1994 | CORROSION CONTROL AND TREATMENT MANUAL |
| MIL-I-45914 Revision A:1991 | Insert, Screw Thread - Locked in, Key Locked, General Specification for |
| PREN 3270 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLANKING PLUGS WITH LOCKING RING |
| MIL-B-10122 Revision E:1991 | Barge, Liquid Cargo: Nonpropelled, Steel, Offshore, 4, 160-Barrel, 120-Foot, Design 231C (No S/S Document) |
| MIL-C-3580 Revision E:1991 | Crane and Crane-Shovels, Truck, Crawler, and Wheel Mounted, Full-Revolving, and Their Attachments, Packaging of (No S/S Document) |
| SAE AMS2488D | Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher |
| PREN 3247 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WELDED |
| PREN 3690 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| EN 4175:2005 | Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL B 85667/7 : A | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 220 KSI FTU, 450 DEG F. |
| MIL-F-18280 Revision F:1995 | Fittings, Flareless Tube, Fluid Connection (S/S by SAE-AS18280) |
| SAE ARP5824 | Recommended Solid Film Lubricants for Fluid System Components |
| SAE AS4444 | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| MIL-G-762 Revision E:1990 | Graders, Road, Packaging of (No S/S Document) |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-B-85667-9 Base Document:1991 | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 160 KSI FTU, 450 DEGREES F |
| PREN 4188 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG, WELDED |
| PREN 4191 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH, LONG |
| PREN 4187 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG |
| SAE MA1975 | Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 °C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems |
| BS EN 4175:2005 | Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
| MIL-A-14295 Revision C:1985 | Alignment Equipment, Wheel, for Military Wheeled Vehicles (No S/S Document) |
| PREN 4175 : 200P1 | AEROSPACE SERIES - COLLARS, FLANGED SWAGE LOCKING, SHEARTYPE, IN TITANIUM TI-P99002, METRIC SERIES |
| MIL-C-85049-94 Base Document:1993 | Connector Accessories, Electrical, Mounting Device Flange Type, Full Mounting Perimeter Device, Type I (Heavy Duty)(S/S by SAE-AS 85049/94) |
| MIL B 85667/12 : 0 | BOLT, SLEEVE 100 DEGREE TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU |
| PREN 6046 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL-NARROW SERIES DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4182 : 200P1 | PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEE, REDUCED |
| PREN 4030 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD RUN |
| PREN 4190 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, WITH SWIVEL NUT ON RUN |
| PREN 4019 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED |
| PREN 4017 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE |
| SAE AS85421A | Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For |
| ASTM D 2510 : 1994 : R2006 | Standard Test Method for Adhesion of Solid Film Lubricants |
| ASTM D 2510 : 1994 : R2017 | Standard Test Method for Adhesion of Solid Film Lubricants |
| DIN EN 4233:2002-08 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, WELDED, THREADED |
| TT-N-95 Revision B:1967 | Naphtha, Aliphatic |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| ASTM D 1400 : 2000 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| MIL L 63460 : D | LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS (METRIC) |
| DOD L 85336 : A | LUBRICANT, ALL WEATHER (AUTOMATIC WEAPONS) |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL L 46000 : C | LUBRICANT, SEMI-FLUID (AUTOMATIC WEAPONS) |
| ASTM F 22 : 2013 : REDLINE | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| VV-D-1078 Revision B:1983 | Damping Fluid, Silicone Base (Dimethyl Polysiloxane) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM D 1186 : 2001 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
| MIL T 83133 : D | TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
| MIL-A-8243 Revision D:1985 | Anti-Icing and Deicing-Defrosting Fluids (S/S by SAE-AMS1424) |
| QQ-A-250-5 Revision F:1971 | Aluminum Alloy Alclad 2024, Plate and Sheet (See Notice 5 for Replacement Information) |
| MIL L 14107 : C | LUBRICATING OIL, WEAPONS, LOW TEMPERATURE |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| DOD P 16232 : F | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
| MIL C 372 : C | CLEANING COMPOUND, SOLVENT FOR BORE OF SMALL ARMS AND AUTOMATIC AIRCRAFT WEAPONS |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.