MIL L 2104 : F
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE
Available format(s)
PDF
Language(s)
English
Publisher
Superseded date
10-02-1997
Superseded by
$33.64
Including GST where applicable
Specifies engine oils for lubrication of reciprocating internal combustion engines of spark and compression ignition types and power transmission fluid applications in machinery used in tactical combat service
| Committee |
FSC 9150
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-L-46152 Revision E:1990 | Lubricating Oil, Internal Combustion Engine, Administrative Service (S/S by A-A-52039) |
| MIL-DTL-53135 Base Document:1996 | Auxiliary Power Unit, 10 KW, 120/240 VAC, 60 HZ |
| MIL-C-70723 Base Document:1993 | Cartridge, Caliber .50, M-858 Ball and M-860 Tracer Short Range Training Ammunition |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-C-52326 Revision B:1974 | Crane, Crawler Mounted, 60 Ton at 25 Foot Radius, Diesel Engine Driven (No S/S Document) |
| MIL C 00555 : K | COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN |
| MIL-A-516 Revision J:1981 | Auger, Earth, Skidmounted; and Auger, Earth, Turntable Base Mounted, Power Driven |
| MIL-HDBK-267 Revision A:1987 | Guide for Selection of Lubricants and Hydraulic Fluids for usein Shipboard Equipment |
| MIL H 24135/12 : 0 | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE, FOR FLEXIBLE HOSE ASSEMBLIES (SINGLE WIRE BRAID OVER SINGLE SYNTHETIC FIBER BRAID MEDIUM PRESSURE, HIGH TEMPERATURE, MULTI-FLUID SIZES -4 THROUGH -40 |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| MIL-B-734 Revision E:1984 | Breakers, Paving, Gasoline Powered, Self Contained (No S/S Document) |
| MIL H 24135/9 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, HEAVY SPIRAL WRAPPED WIRE, HIGH PRESSURE, SIZES 8THRU32) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| MIL-C-555 Revision L:1991 | Compressors, Air, Reciprocating and Rotary, Diesel Engine Driven |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| MIL G 53133 : B | GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| MIL R 62220 : B | RECOVERY VEHICLE, FULL TRACKED, MEDIUM, M88A1, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-E-17341 Revision C:1970 | Engine, Gas Turbine, Propulsion and Auxiliary Naval Shipboard |
| MIL-R-46082 Revision B:1983 | Retaining Compounds, Single Component, Anaerobic (S/S by ASTM-D5363) |
| MIL DTL 0053133 : B NOTICE 1 | GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| MIL-G-19826 Revision F:1984 | Generator Set, Diesel Engine, Alternating Current , for Facilities Construction; 10 KW Through 1000 KW (Not Stocked) (S/S By CC-G-2745) |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) (NO S/S DOCUMENT) |
| MIL-C-70726 Revision A:1993 | Cartridge, Caliber .50, Blank, XM928, Performance Specification for (No S/S Document) |
| MIL-B-52734 Revision C:1991 | Bridge, Floating: Ribbon, Interior Bay and Ramp Bay (No S/S Document) |
| MIL-T-52942 Revision C:1996 | TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION (NO S/S DOCUMENT) |
| MIL-E-52929 Base Document:1977 | Enamel, Alkyd, Camouflage, Flash Dry (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL-C-52648 Revision D:1993 | Crane, Crawler Mounted, 40 Ton at 12 Foot Radius, 2 Cubic Yard, Diesel-Engine-Driven (No S/S Document)) |
| MIL-P-10360 Revision G:1993 | Pump, Centrifugal, 4 Inch and 6 Inch, Gasoline Engine and Diesel Engine Driven, for Water (No S/S Document) |
| MIL-DTL-62220 Revision C:1996 | Recovery Vehicle, Full-Tracked, Heavy, M88A2 Preparation for Storage and Shipment of (No S/S Document) |
| MIL-G-52732 Revision B:1985 | Generator Set, Gasoline Engine Driven, 0.5KW thru 10KW, 60 Hertz, 400 Hertz, and 28 Volt Direct Current, Type 1 (Tactical), Class 2 (Utility) General Specification for (No S/S Document) |
| MIL-P-52746 Revision C:1994 | PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF-PRIMING, 2-INCH, 100-GPM AT 100 FEET TOTAL DYNAMIC HEAD (S/S BY MIL-PRF-52109) |
| MIL-T-62514 Base Document:1985 | TRUCKS, 5-TON, 6X6, M939A1 SERIES (S/S BY TACOM PUB ATPD-2056) |
| MIL G 62186 : 1988 | GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED) |
| MIL H 24135/3 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, SPIRAL-WRAPPED, BRAIDED HIGH PRESSURE, SIZES 16THRU32 |
| MIL-I-62521 Base Document:1987 | Insulation, Floor-Mat, Thermal-Barrier (S/S by A-A-52473) |
| MIL PRF 62186 : A | GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED) |
| MIL H 24595 : NOTICE 2 | HOSE, WIRE REINFORCED LARGE DIAMETER WITH REUSABLE END FITTINGS FOR FLEXIBLE CONNECTIONS |
| MIL-G-22077 Revision C:1993 | Generator Sets, Gas Turbine, Direct and Alternating Current Naval Shipboard Use |
| MIL E 46117 : A | |
| MIL-C-70724 Base Document:1992 | Cartridge, 5.56MM, Blank, M200A1 Performance Specification for |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMITRAILER MOUNTED (NO S/S DOCUMENT) |
| MIL-L-8937 Revision D:1982 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, NATO Code Number S-1738 (S/S by MIL-L-46010) |
| MIL-C-29475 Base Document:1994 | Coating, Water Borne Polyurethane Camouflage (S/S by MIL-DTL-64159) |
| SAE AS8090A | Mobility, Towed Aerospace Ground Equipment, General Requirements For |
| MIL-T-9720 Revision F:1984 | Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B |
| MIL-C-70725 Revision A:1993 | Cartridge, 5.56MM, M862 Short Range Training Ammunition Performance Specification for |
| MIL-S-45005 Revision C:0198 | SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER, SPRING-LOADED (S/S BY A-A-52524) |
| MIL H 24135/10 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES SINGLE OR DOUBLE WIRE BRAID,MEDIUM PRESSURE SIZES -4 THROUGH -48 |
| MIL-H-24135-11 Base Document:1993 | Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Ply, Spiral Wire Wrap, Low Pressure, Sizes -80 and -96) (No S/S Document) |
| MIL-B-26793 Revision B:1958 | Blower, Gasoline Engine Driven, Type A-1 (No S/S Document) |
| MIL-P-13822 Base Document:1954 | Polyisobutylene/Oil Gel |
| MIL E 62177 : C | ENGINE, DIESEL: 12 CYLINDER, 90 V-TYPE, 750H.P. AVDS1790-2 AVDS1790-2A, AVDS1790-2C, AVDS1790-2D, AVDS1790-2DR, AVDS1790-2CA AND AVDS1790-2DA |
| MIL-G-52880 Revision A:1983 | Generator Set, Diesel Engine, 500 KW 50/60 Hertz, Tactical Utility (No S/S Document) |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL-R-13742 Base Document:1954 | RDX, Desensitized |
| MIL-G-52884 Revision A:1981 | Generator Set, Diesel Engine Driven, 15 thru 200 Kilowatts 50/60 and 400 Hertz, (Tactical) (No S/S Document) |
| MIL C 71167 : 0 | CARTRIDGE, 7.62mm, M973 BALL SHORT RANGE TRAINING AMMUNITION, PERFORMANCE SPECIFICATION FOR |
| MIL-T-52932 Revision D:1991 | Trucks, Lift, Fork, Internal Combustion Engine, 2000-4000-6000 Pound Capacity, General Specification for (No S/S Document) |
| MIL M 8090 : F | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| MIL F 24787 : 0 | FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR |
| MIL H 24135/13 : 0 | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE WIRE BRAID, HIGH PRESSURE, HIGH TEMPERATURE, MULTI-BASED OIL, SIZES -4 THROUGH -32) |
| MIL C 71168 : 0 | CARTRIDGE, 7.62mm, M974 TRACER SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL-L-23398 Revision D:1985 | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749 |
| MIL-STD-1400 Revision C:1990 | Engines, Gasoline and Diesel, Methods of Test |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL H 24135/5 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE-WIRE BRAID, PERFORATED COVER, FOR HIGH PRESSURE AIR, SIZES 4THRU32) |
| MIL-B-62098 Base Document:1968 | Bulldozer, Earth Moving: Tank Mounting, M8A3 |
| MIL-V-62038 Revision E:1988 | VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF (S/S BY MIL-STD-3003) |
| MIL H 24136 : B | HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL H 24135/1 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLY (DOUBLE-WIRE BRAID OR TWO-SPIRAL AND ONE-WIRE BRAID HIGH - PRESSURE SIZES 4THRU32 |
| MIL PRF 62270 : A | CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5 |
| MIL H 24135/2 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, SPIRAL-WRAPPED OR TWO PLIES, SPIRAL-WRAPPED AND ONE PLY, B.H.P - SIZES 6THR16 |
| MIL-G-83380 Base Document:1979 | Generator Set, Gas Turbine Engine Driven, 60KW, 400 HZ (No S/S Document) |
| MIL-A-62463 Revision B:1992 | Actuator Assembly, Rotary |
| MIL-C-52974 Base Document:1983 | Crane, Wheel Mounted, Hydraulic, Light, 7-1/2 Ton (No S/S Document) |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL C 62122 : B | CABLE ASSEMBLY, SLAVE, ELECTRICAL, CONNECTORS, PLUG, AND RECEPTACLE |
| MIL-STD-457 Revision B:1989 | TANKS, PETROLEUM FUEL AND LUBRICANTS, OPERATING AND BULK STORAGE, MINIMUM FREQUENCY FOR INSPECTION AND CLEANING (S/S BY STANAG 3609) |
| MIL-T-52735 Revision B:1991 | Transporter: M812 Chassis, For Ribbon Floating Bridge (No S/S Document) |
| MIL H 24135 : B | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES |
| NASA KSC SO S 9 : 1993 | RETEST AND REFURBISHMENT OF COMPRESSED GAS TRAILERS AND MOVABLE STORAGE UNITS, STANDARD FOR |
| MIL-G-82058 Revision D:1984 | Generator Set, Diesel, 750 KW, 50/60 Hertz, Prime, Utility (No S/S Document) |
| MIL-S-12511 Revision G:1983 | Sprayer, Pesticide, Frame-Mounted: Gasoline-Engine-Driven, Mist and Solid Stream, 360 GHP (No S/S Document) |
| MIL-B-45390 Revision A:1987 | Bulldozer Kit, Earth Moving, Tank Mounting, M9 |
| MIL-L-46811 Revision B:1990 | Lubrication of Ground Handling, Launching and Control Equipment for Guided Missiles |
| MIL H 13444 : E | HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
| MIL-G-52889 Revision C:1981 | Generator Sets, Diesel Engine Driven, 5 KW, 60 Hertz and 10 KW, 60 and 400 Hertz Tactical, Utility, General Specification for (No S/S Document) |
| MIL-A-52940 Revision C:1987 | Aerosol Generator, Non Thermal, Insecticide, Ultra Low Volume (No S/S Document) |
| MIL-P-16406 Revision A:1974 | PAINT, BLACK, HIGH-GLOSS, QUICK DRYING (NO S/S DOCUMENT) |
| MIL-DTL-81944 Revision C:1997 | Trailer, Munitions, Small (MHU-126 A/M) |
| MIL-A-13488 Revision C:1973 | Air Cleaner, Engine: Heavy-Duty, Oil-Bath Type (for Internal-Combustion Engines) (No S/S Document) |
| MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED (NO S/S DOCUMENT) |
| MIL H 24135/4 : A | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE-WIRE BRAID FOR MEDIUM PRESSURE SIZES 40-48 AND 64) |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| SAE J183_201611 | Engine Oil Performance and Engine Service Classification (Other than “Energy Conserving”) |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| ASTM D 129 : 2013-08 | TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD) |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| ASTM D 2896 : 2015 : REDLINE | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 524 : 2015 : REDLINE | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| SAE J300_201501 | Engine Oil Viscosity Classification |
| ASTM D 4628 : 2016 : REDLINE | Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry |
| ASTM D 4047 : 2013-08 | TEST METHOD FOR PHOSPHORUS IN LUBRICATING OILS AND ADDITIVES BY QUINOLINE PHOSPHOMOLYBDATE METHOD |
| ASTM D 4624 : 1993 : R1998 | Standard Test Method for Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High-Shear Rates (Withdrawn 2004) |
| ASTM D 4998 : 2013 : REDLINE | Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.