MIL-I-25135 Revision E:1984
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Inspection Materials, Penetrants (S/S by SAE-AMS2644)
29-06-1984
13-03-1998
NO CONTENTS SECTION
Details materials for liquid penetrant inspection of metal and non-porous, non-metal parts for material discontinuities open to the surface providing systems required by MIL-STD-6866 and MIL-STD-271(SH). Coverage includes classification, applicable documents, materials, qualification, developers, solvent removers, toxicity, corrosive properties, flash point, viscosity, water tolerance, storage temperature stability, and penetrant contamination.
| DevelopmentNote |
MIL-I-25135E CANCELLED (13/3/98) Future Acquisitions for this material refer to SAE AMS 2644. The Qualified Products List associated with this cancelled specification QPL-25135-17 is cancelled and replaced by QPL-AMS-2644-1
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This specification covers materials used in the liquid penetrant inspection of metal and nonporous, nonmetal parts for material discontinuities open to the surface.
| Standards | Relationship |
| SAE AMS3156E | Similar to |
| SAE AMS3157D | Similar to |
| SAE AMS3155E | Similar to |
| ENA TS 98-20 : ISSUE 1 1989 | PENETRANT FLAW DETECTION CAPABILITY |
| ESI 98-20 : ISSUE 1 | PENETRANT FLAW DETECTION CAPABILITY |
| MIL-STD-2175 Revision A:1993 | CASTINGS, CLASSIFICATION AND INSPECTION OF (S/S BY SAE-AMS-STD-2175) |
| MIL-A-22771 Revision D:1984 | Aluminum Alloy Forgings, Heat Treated (S/S by SAE-AMS-A-22771) |
| NASA KSC SPEC Z 0013 : 1969 | PENETRANT, MAGNETIC PARTICLE AND ULTRASONIC INSPECTION REQUIREMENTS FOR, SPECIFICATION FOR |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| MIL-A-21180 Revision D:1984 | Aluminum-Alloy Castings, High Strength (S/S by SAE-AMS-A-21180) |
| MIL-P-63226 Base Document:1979 | Projectile, Guided, 155mm, XM712, Warhead For |
| MIL L 38671 : A | LUG, SUSPENSION, BOMB MAU-129/A, "T" TYPE |
| PREN 1279-6 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS |
| NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
| MIL-P-47158 Base Document:1974 | PENETRANT INSPECTION, SOUNDNESS REQUIREMENTS FOR MATERIALS, PARTS AND WELDMENTS (S/S BY MIL-STD-1907) |
| SAE AS7100/1B | National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program |
| I.S. EN 1279-6:2002 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS |
| 15/30319706 DC : 0 | BS EN 1279-6 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| SAE J426_201801 | Liquid Penetrant Test Methods |
| BS EN 1279-6:2002 | Glass in building. Insulating glass units Factory production control and periodic tests |
| EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| MIL-F-38762 Base Document:1966 | Fluorescent Penetrant Inspection Units (No S/S Document) |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| MIL-STD-6866 Base Document:1985 | Inspection, Liquid Penetrant (S/S by ASTM-E1417) |
| SAE AIR4012C | USAF Aircraft Wheels |
| SAE AMSSTD2175A | Castings, Classification and Inspection of |
| PREN 6052 : 200P1 | AEROSPACE SERIES - RIVETS - COLLAR - SYSTEM IN ALUMINIUM ALLOY SHEAR TYPE INCH SERIES - TECHNICAL SPECIFICATION |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| QQ-A-250-12 Revision F:1982 | Aluminum Alloy 7075, Plate and Sheet (See Notice 3 for Replacement Information) |
| PPP-C-96 Revision E:1992 | Cans, Metal, 28 Gage and Lighter |
| PPP-B-636 Revision J:1981 | Boxes, Shipping, Fiberboard (S/S by ASTM-D1974 and ASTM-D5118) |
| MIL-STD-147 Revision E:2008 | Palletized Unit Loads |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| ASTM G 41 : 1990 | PRACTICE FOR DETERMINING CRACKING SUSCEPTIBILITY OF METALS EXPOSED UNDER STRESS TO A HOT SALT ENVIRONMENT |
| MIL-STD-6866 Base Document:1985 | Inspection, Liquid Penetrant (S/S by ASTM-E1417) |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| PPP-D-729 Revision E:1977 | Drums, Shipping and Storage, Steel, 55-Gallon (208 Liters) |
| QQ-M-44 Revision B:1964 | Magnesium Alloy Plate and Sheet ( AZ31B) (S/S byAMS4375, AMS4377 and AMS4376) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| PPP-B-640 Revision D:1966 | Boxes, Fiberboard, Corrugated, Triple Wall (S/S by ASTM-D5168) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.