MIL-H-19457 Revision D:1989
Current
Current
The latest, up-to-date edition.
Hydraulic Fluid, Fire-Resistant, Non-Neurotoxic
Available format(s)
PDF
Language(s)
English
Published date
12-04-1989
Publisher
$33.64
Including GST where applicable
Details requirements of fire-resistant hydraulic fluid for hydraulic systems which operate above 600 psig and are accumulator loaded.
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This specification covers the requirements of fire-resistant hydraulic fluid for hydraulic systems which are accumulator loaded and operate above 600 pounds per square inch gauge.
| MIL-E-16400 Revision H:1987 | Electronic, Interior Communication and Navigation Equipment, Naval Ship and Shore: General Specification for (S/S by MIL-STD-2036) |
| MIL H 24135/12 : 0 | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE, FOR FLEXIBLE HOSE ASSEMBLIES (SINGLE WIRE BRAID OVER SINGLE SYNTHETIC FIBER BRAID MEDIUM PRESSURE, HIGH TEMPERATURE, MULTI-FLUID SIZES -4 THROUGH -40 |
| MIL-STD-419 Revision E:2010 | Cleaning, Protecting, and Testing Piping, Tubing, and Fittings for Hydraulic Power Transmission Equipment |
| MIL-HDBK-2193 Base Document:1994 | Hydraulic System Components, Ship (S/S by MIL-STD-2193) |
| MIL V 24630 : 0 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-24694 Revision A:2011 | Valve, Hydraulic Relief, 1.5 - 35 Bars (22 - 500 Pounds Per Square Inch) Cartridge Type, General Specification for |
| MIL-P-16789 Revision D:1986 | Pumps (Including Prime Movers and Support Items); Packaging of |
| MIL-P-24423 Base Document:1970 | Propulsion and Auxiliary Control Consoles and Associated Control and Instrumentation Equipment, Naval Shipboard Use, Basic Design Requirements |
| MIL-C-18419 Revision B:1962 | Compressors, Reciprocating, Motor Driven, Naval Shipboard High Pressure Air Service (No S/S Document) |
| MIL-DTL-24695 Revision C:2012 | Valve, Hose Assembly, and Adapter, Vent and Test Hydraulic Service, General Specification for |
| MIL-HDBK-692 Revision B:1983 | A Guide to the Selection of Rubber O-Rings |
| MIL-B-24781 Base Document:1993 | Batterboard Systems, Synthetic (S/S by A-A-59001) |
| MIL-H-24135-7 Revision A:1993 | Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies, Spiral Wrapped Wire, High Pressure, Sizes -20, -24 and -32, for Phosphate Ester Base Fluids) (No S/S Document) |
| MIL W 83420 : E | WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-H-24135-8 Revision A:1993 | Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies, Spiral-Wrapped Wire, High Pressure, Sizes -6 through -16, for Phosphate Ester Base Fluids) (No S/S Document) |
| MIL-H-24135-6 Revision A:1993 | Hose, Synthetic Rubber, Wire Reinforced for Flexible Hose Assemblies (Double Wire Braid or Two-Spiral and One-Wire Braid, High Pressure, Sizes -4 through -32 for Phosphate Ester Base Hydraulic Fluids) (No S/S Document) |
| MIL H 24135/13 : 0 | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE WIRE BRAID, HIGH PRESSURE, HIGH TEMPERATURE, MULTI-BASED OIL, SIZES -4 THROUGH -32) |
| MIL V 0024695 : B | VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-H-22072 Revision C:1984 | Hydraulic Fluid, Catapult, NATO Code Number H-579 |
| MIL-F-18870 Revision E:1975 | Fire Control Equipment, Naval Ship and Shore, General Specification |
| MIL-DTL-24630 Revision A:2014 | Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-83420 Revision P:2017 | Wire Rope, Flexible, for Aircraft Control, General Specification for |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| SAE J2333_201305 | Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT (S/S BY SAE-AMS7276, SAE-AMS7259, SAE-AMS3216, AND SAE-AMS3218) |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL A 18001 : K | ANODES, SACRIFICIAL ZINC ALLOY |
| QQ-C-576 Revision B:1961 | Copper Flat Products with Slit and Edge-Rolled, Sheared, Sawed or Machined Edges, (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B152) |
| QQ-B-613 Revision D:1973 | Brass, Leaded and Nonleaded :Flat Products (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B36 and ASTM-B121) |
| MIL G 22050 : D | GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| O-M-232 Revision M:2016 | Methanol (Methyl Alcohol) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.