MIL-DTL-83420 Revision P:2017
Current
Current
The latest, up-to-date edition.
WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for carbon steel and corrosion resistant steel aircraft control flexible wire rope.
| Committee |
FSC 1640
|
| DevelopmentNote |
Supersedes MIL W 83420 (E). (03/2016)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| BS W13(1973) : 1973 | AEROSPACE SERIES - SPECIFICATION FOR PREFORMED CORROSION-RESISTING STEEL WIRE ROPE (ISO DIAMETERS AND STRENGTHS) |
| MIL-DTL-87161 Revision G:2015 | WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT APPLICATION |
| MIL-PRF-39012-25 Revision F:2009 | Cover, Plug and Receptacle, Connectors, Coaxial, Radio Frequency (Hardware for Radio Frequency Coaxial Connectors) |
| MIL-DTL-781 Revision J:2014 | TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR |
| RR-W-410 Revision H:2015 | WIRE ROPE AND STRAND |
| CSA B355 : 2015 | LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| ANSI/ASSE Z359.15 : 2014 | SAFETY REQUIREMENTS FOR SINGLE ANCHOR LIFELINES AND FALL ARRESTERS FOR PERSONAL FALL ARREST SYSTEMS |
| MIL-DTL-7034 Revision F:2005 | PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-22244 Revision F:2012 | CARTRIDGE, IMPULSE, MARK 23 MOD 0 |
| MIL-DTL-87218 Revision E:2012 | Cable, Lockclad, for Aircraft Control |
| MIL-DTL-27516 Revision G:2011 | Hose and Hose Assembly, Nonmetallic, Suction and Discharge |
| MIL-DTL-83413 Revision C:2012 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR |
| MIL-DTL-6117 Revision L:2008 | WIRE ROPE ASSEMBLIES, AVIATION, SWAGED TYPE |
| SAE ARP 5770 : 2012 | MECHANICAL CONTROL DESIGN GUIDE |
| ANSI/ASSE Z359.3 : 2007 | SAFETY REQUIREMENTS FOR LANYARDS AND POSITIONING LANYARDS |
| MIL-DTL-9490 Revision E:2008 | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-5688 Revision E:2001 | WIRE ROPE ASSEMBLIES; AIRCRAFT, PROOF TESTING AND PRESTRETCHING OF |
| ASTM F 2180 : 2017 : REDLINE | Standard Specification for Metallic Implantable Strands and Cables |
| MIL-DTL-17902 Revision G:2013 | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| MIL-DTL-6615 Revision G:2008 | Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
| MS51844 Revision E:2011 | SLEEVE, SWAGING-WIRE ROPE |
| NASA JSC 65828 : 2011 | STRUCTURAL DESIGN REQUIREMENTS AND FACTORS OF SAFETY FOR SPACEFLIGHT HARDWARE |
| ANSI/ASSE Z359.15 : 2014 | SAFETY REQUIREMENTS FOR SINGLE ANCHOR LIFELINES AND FALL ARRESTERS FOR PERSONAL FALL ARREST SYSTEMS |
| SAE AS 94900 : 2007 | AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-55074-3 Revision C:2015 | CONNECTOR, RECEPTACLE, TELEPHONE, ELECTRICAL |
| MIL-DTL-83413-1 Revision D:2010 | Connectors and Assemblies, Electrical, Aircraft Grounding: Type I Grounding Assembly, Discharger, Electrostatic |
| MIL-DTL-83413-2 Revision C:2010 | Connectors and Assemblies, Electrical, Aircraft Grounding: Type II Grounding Assembly, Discharger, Electrostatic |
| MIL-DTL-83413-10 Revision C:2010 | Connectors and Assemblies, Electrical, Aircraft Grounding: Jumper Cable Assembly, Aircraft to Fuel Nozzle, Discharger, Electrostatic |
| MIL-PRF-83041 Revision C:2000 | FILTER-SEPARATOR, LIQUID FUEL SKID MOUNTED, 600 GALLONS PER MINUTE |
| MIL-DTL-32369 Base Document:2011 | CARTRIDGE, IMPULSE, CCU-167/B |
| A-A-59934 Base Document:2013 | Sleeve, Swaging-Wire Rope, Aluminum |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| SAE AMS 1424 : 2016 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| MIL-DTL-83420-1 Revision E:2017 | WIRE ROPE, FLEXIBLE, TYPE 1, COMPOSITION A |
| MIL-DTL-781 Revision J:2014 | TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR |
| MIL-DTL-83420-2 Revision D:2002 | WIRE, ROPE, FLEXIBLE, TYPE 1, COMPOSITION B |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| MIL-DTL-83420-3 Revision E:2017 | WIRE ROPE, FLEXIBLE, TYPE 2 (JACKETED), COMPOSITION A |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| SAE AIR 4127 : 2015 | STEEL: CHEMICAL COMPOSITION AND HARDENABILITY |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MIL-DTL-83420-4 Revision E:2017 | WIRE ROPE, FLEXIBLE, TYPE 2 (JACKETED), COMPOSITION B |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| MIL-H-19457 Revision D:1989 | HYDRAULIC FLUID, FIRE RESISTANT, NON NEUROTOXIC |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.