MIL-DTL-7899 Revision D:2014
Current
The latest, up-to-date edition.
Valve, Check, Aircraft Fuel System
English
26-11-2014
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies low-pressure check valves suitable for use with hydrocarbon fuels, fuel vapors, and air.
| DevelopmentNote |
Supersedes MIL V 7899 (C). Inactive for New Design. (01/2015)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers low-pressure check valves suitable for use with hydrocarbon fuels, fuel vapors, and air.
| MS29521 Revision H:2015 | Disk, Valve |
| MS28882 Revision G:2009 | Valve, Fuel Check, Low Pressure, Gasket Seal Straight Thread Connection |
| MIL-PRF-7024 Revision F:2012 | Calibrating Fluids, Aircraft Fuel System Components |
| MIL-I-8500 Revision D:1980 | Interchangeability and Replaceability of Component Parts for Aerospace Vehicles |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| SAE ARP8615 | Fuel System Components: General Specification For |
| SAE ARP868C | Method-Pressure Drop Tests for Fuel System Components |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AMS7276H | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems |
| SAE AMS3216G | Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 |
| MIL-HDBK-831 Revision A:2013 | Preparation of Test Reports |
| SAE AMSR83485A | Rubber, Fluorocarbon Elastomer, Improved Perfrormance At Low Temperatures |
| MIL-PRF-680 Revision C:2010 | Degreasing Solvent |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| ASME Y14.24 : 2012 | TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| ASME Y14.34 : 2013(R2018) | ASSOCIATED LISTS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| SAE AMS7259E | Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems |
| MS29521 Revision H:2015 | Disk, Valve |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS3218C | Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| MS28884 Revision F:2009 | Valve, Fuel Check, Low Pressure, Flared Tube Connection |
| MS21430 Revision B:2009 | Valve, Check, Fuel and Air, Poppet Type, Zero, Leak |
| SAE AMSP5315B | Acrylonitrile-butadiene (NBR) Rubber For Fuel-Resistant Seals 60 to 70 |
| MIL-PRF-6855 Revision F:2009 | Rubber, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for |
| MIL-DTL-25988 Revision C:2006 | Rubber, Fluorosilicone Elastomer, Oil - and Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MS21344 Revision A:2016 | Fittings - Installationof Flared Tube, Straight, Threaded Connectors, Design Standard for |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.