MIL-DTL-5541 Revision F:2006
Current
Current
The latest, up-to-date edition.
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Available format(s)
PDF
Language(s)
English
Published date
11-07-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes chemical conversion coatings formed by the reaction of chemical conversion materials with the surfaces of aluminum and aluminum alloys.
| DevelopmentNote |
Supersedes MIL C 5541 (E). (07/2006)
|
| DocumentType |
Standard
|
| Pages |
14
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers chemical conversion coatings formed by the reaction of chemical conversion materials with the surfaces of aluminum and aluminum alloys.
| MIL-DTL-15514 Revision G:2016 | Telephone Equipment, Sound Powered Telephone Handset, Headset-Chest Set, and Headset - Chest Set, Noise Attenuating |
| MS20759 Revision C:2013 | Elbow, Hose, Flanged Swivel, 90 Degrees |
| ASTM B 449 : 1993 : R1998 | Standard Specification for Chromates on Aluminum |
| MIL-DTL-55302-54 Revision C:2003 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-PRF-32104 Base Document:2010 | MOBILE HYDRAULIC OIL DISPENSER |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-DTL-4510 Revision F:2009 | Spotlights, Incandescent, Roof-Mounted, Automotive |
| SAE AS 5127 : 2013 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
| MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-DTL-18492 Revision B:2011 | TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-DTL-27188 Revision C:2006 | INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI |
| MIL-DTL-24728-8 Revision A:2009 | Interconnecting Box, Fiber Optic, Fusion Splice Tray and Tray Holder Module |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| MIL-DTL-55302-99 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT THROUGH, HERMAPHRODITIC CONTACT, WRAPPOST REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-PRF-81309 Revision G:2014 | CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM |
| MIL-DTL-55302-53 Revision C:2003 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Right-Angle, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-6484 Revision D:2007 | LIGHTS, COCKPIT UTILITY, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-PRF-83419 Revision F:2016 | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL-DTL-27193 Revision D:2017 | INDICATOR, ATTITUDE ARU-2B/A |
| SAE AS 6116 : 2016 | ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
| DSCC 84191 : K | EXTRACTOR, ELECTRICAL CARD, METAL |
| SAE AIR 4066 : 2017 | AEROSPACE FLUID POWER - MATERIALS AND CHARACTERISTICS OF FLIGHT CONTROL SERVOACTUATORS OF VARIOUS AIRCRAFT |
| ASTM B 449 : 1993 : R2010 : EDT 1 | Standard Specification for Chromates on Aluminum |
| SAE AMS C 27725 : 2016 | COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MS20761 Revision C:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
| ASTM B 921 : 2008 : R2018 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM D 1730 : 2009 : R2014 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1730 : 2009 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM B 921 : 2008 : R2013 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM B 449 : 1993 : R2004 | Standard Specification for Chromates on Aluminum |
| 15/30333168 DC : 0 | BS EN 6118 - AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
| MIL-DTL-24728-10 Base Document:2010 | INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1017 MM |
| MIL-DTL-29563 Revision B:2014 | Antenna System, Aims Shipboard, Electronically Steered OE-120/UPX |
| MIL-STD-2088 Revision B:2007 | BOMB RACK UNIT (BRU), SINGLE STORE, AIRCRAFT |
| MIL-DTL-22641 Revision G:2016 | ADAPTERS, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| MIL-DTL-28827 Revision C:2011 | SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-DTL-24728-9 Base Document:2010 | INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1372 MM |
| MIL-DTL-5099 Revision C:2011 | INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| A-A-59590 Revision D:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-12606 Revision E:2000 | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02 |
| A-A-59789 Revision B:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-24317 Revision B:2010 | SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| MIL-DTL-83454 Revision B:2016 | TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| MIL-DTL-62478 Revision C:2010 | COUPLER, OPTICAL |
| MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
| MS35759 Revision C:2008 | CUPS, GREASE, AUTOMATIC FEED |
| SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| SAE AS 4459 : 2013 | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
| MIL-DTL-28754-22 Revision H:2014 | Connectors, Electrical, Modular, Frame, Casting, Type IV, Single Span |
| A-A-59950 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-STD-871 Revision C:2015 | Electro-Chemical Stripping of Inorganic Finishes |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-PRF-1-1718 Revision A:1998 | ELECTRON TUBE, GAS SWITCHING TYPE 8922 |
| MIL-DTL-85052-5 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, ETHYLENE PROPYLENE |
| MIL-DTL-24251-3 Revision D:2013 | Shield, Electron Tube, Heat Dissipating 7 and 9 Pin, Miniature (Split Shell) |
| MIL-PRF-22885-114 Base Document:2009 | SWITCHES, PUSHBUTTON, WHITE LIGHT EMITTING DIODE (LED) OR 4 LAMP REPLACEABLE INCANDESCENT ILLUMINATED, STANDARD, NIGHT VISION IMAGING SYSTEM (NVIS) AND SUNLIGHT READABLE DISPLAYS, DIMMABLE, SPDT, DPDT AND 4PDT, LOW LEVEL TO 7 AMPERES, SEALED AND UNSEALED, SOLDER AND COMMON TERMINATION SYSTEM (CTS) TERMINATIONS |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| MIL-DTL-3976 Revision F:2013 | Lights, Marker, Clearance (Service and Blackout) General Specification for |
| SAE ARP 994 : 2016 | DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE HYDRAULIC SYSTEMS |
| MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| MS20760 Revision D:2013 | ADAPTER, STRAIGHT, FLANGE TO TUBE |
| SAE AS 17852 : 2012 | REDUCERS, OXYGEN PRESSURE |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| MIL-DTL-28839 Revision B:2013 | Waveguides, Elliptical General Specification for |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| DSCC 84103 : J | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-DTL-85052-10 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, NITRILE BUTADIENE RUBBER FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| MIL-PRF-7907 Revision C:2007 | Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
| A-A-59812 Revision A:2015 | HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, MULTIPLE PIECE, GENERAL REQUIREMENTS FOR |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| MS20762 Revision D:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| DSCC 85122 : G | INDICATOR ASSEMBLIES: RED, YELLOW, GREEN; PLAIN AND FILTERED LENSES; PANEL-SEALED, AND PANEL AND REAR SEALED |
| MIL-DTL-55302-52 Revision D:2003 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| MIL-DTL-70337 Revision A:2015 | RING, RETAINING, ROUND SECTION |
| MIL-DTL-85052-6 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 400 DEGREES F, FLUOROSILICONE |
| MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-DTL-24251-4 Revision D:2013 | RETAINER (BASE),AND ADAPTER, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| MIL-DTL-18264 Revision E:2015 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
| MS20757 Revision C:2013 | Connector, Fixed Flange, to Hose |
| MS20756 Revision F:2011 | FLANGE, SWIVEL, RETAINING |
| MIL-DTL-85052-8 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 500 DEGREES F, SILICONE RUBBER, FABRIC REINFORCED |
| MIL-DTL-287 Revision J:2012 | WAVEGUIDE ASSEMBLIES, FLEXIBLE, TWISTABLE AND NON-TWISTABLE, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-102 Revision E:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT, CRIMP REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-DTL-25308 Revision C:2010 | GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1 |
| SAE AS 19692 : 2016 | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| ASTM D 1731 : 2009 | Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting |
| ASTM D 1731 : 2009 : R2014 | Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-DTL-83361 Revision B:2007 | INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| IPC HDBK 630 : 0 | GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY |
| A-A-59832 Revision B:2016 | EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR |
| SAE ARP 5770 : 2012 | MECHANICAL CONTROL DESIGN GUIDE |
| NASA PRC 5005 : 2007 | PROCESS SPECIFICATION FOR THE CHEMICAL CONVERSION COATING OF ALUMINUM ALLOYS |
| MIL-STD-3035 Base Document:2013 | DESIGN CRITERIA STANDARD - USAF AIRCRAFT ARRESTING SYSTEMS |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MIL-PRF-32390 Base Document:2011 | ENGAGING DEVICE, AIRCRAFT ARRESTING SYSTEM - USAF PENDANT CABLE RETRACTION SYSTEMS (PCRS) |
| MIL-DTL-12883-53 Revision B:2003 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, MOUNTING TRACK, FOR RELAY SOCKETS AND ELECTROMAGNETIC RELAYS |
| MIL-DTL-28754-23 Revision G:2014 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE 4, SINGLE SPAN |
| MIL-PRF-32222 Revision A:2016 | HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR |
| MIL-DTL-83739 Revision D:2012 | SWITCHES, ANTENNA, RADIO FREQUENCY, SOLID-STATE, GENERAL SPECIFICATION FOR |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-DTL-85052-9 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 550 DEGREES F, POLY-TETRAFLUOROETHYLENE (PTFE) |
| SAE AMS 3143 : 2016 | POWDER COATING MATERIAL |
| MIL-DTL-24251-6 Revision E:2013 | SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (RETROFIT TYPE ONLY) |
| MIL-DTL-6508 Revision C:2011 | THERMOMETER, SELF-INDICATING, BIMETALLIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-3890 Revision C:2013 | LINES, RADIO FREQUENCY TRANSMISSION (COAXIAL, AIR DIELECTRIC), GENERAL SPECIFICATION FOR |
| MIL DTL 25627 : D | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| MIL-DTL-32392 Revision A:2013 | AIRCRAFT ARRESTING SYSTEM - TEXTILE (TAAS) |
| SAE AS 4073 : 2013(R2018) | AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES |
| MIL-DTL-24215-10 Revision B:2012 | ATTENUATORS, VARIABLE (STEP) COAXIAL, CLASS 7 (BNC) |
| MIL-PRF-1-1719 Revision C:2012 | Electron Tube, Magnetron Type DOD-011 |
| MIL-DTL-58085 Revision C:2012 | Light, Beacon, Anti-Collision, Aircraft |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| MIL-DTL-28754-49 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, HOUSING |
| MIL-DTL-38449 Revision D:2010 | SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING |
| DEFSTAN 03-38/2(2010) : 2010 | GUIDANCE TO THE USE OF ALTERNATIVES TO HEXAVALENT CHROMIUM FOR THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| DSCC 87019 : G | INDICATOR ASSEMBLIES, IR SECURE LIGHTING; RED, YELLOW, GREEN; PANEL SEALING |
| MIL-DTL-7793 Revision H:2016 | METER, TIME TOTALIZING |
| SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
| I.S. EN 6069:2009 | AEROSPACE SERIES - RIVET, 100 DEGREE REDUCED FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| FF-S-1362 Revision A:2014 | STUD, PLAIN, GENERAL PURPOSE |
| EN 6069:2009 | Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-DTL-24728-11 Base Document:2010 | INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY |
| MIL-DTL-7627 Revision G:2010 | INDICATOR, TURN AND SLIP, 28 V DC |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-DTL-6839 Revision E:2011 | INDICATOR, POSITION, LANDING GEAR |
| MIL-DTL-28754-70 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, SINGLE SPAN, CENTER |
| MIL-DTL-28754-68 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, T-DIP |
| MIL-DTL-83413-8 Revision E:2015 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: TYPE 4 JUMPER CABLE ASSEMBLY, LEAD, ELECTRICAL |
| MIL-DTL-25866 Revision C:2010 | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU-1/A |
| MIL-DTL-28754-21 Revision F:2014 | Connectors, Electrical, Modular, Frame, Casting, Type IV, Double Span |
| MIL-DTL-27190 Revision C:2006 | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-PRF-22885-56 Revision H:2006 | SWITCH, PUSH BUTTON, ILLUMINATED, 2PDT, 4PDT, AND INDICATOR ASSEMBLIES, 4-LAMP, SOLID MOUNTING |
| MIL-DTL-85052-7 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 212 DEGREES F, CHLOROPRENE |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| ASTM B 921 : 2008 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM B 449 : 1993 : R2015 | Standard Specification for Chromates on Aluminum |
| BS EN 6069:2009 | Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series |
| DSCC 89064 : G | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .225 INCH BY .225 INCH AND .225 INCH BY .260 INCH BODY SIZE |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 85033 : H | HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, ZERO INSERTION FORCE |
| PREN 6118 : DRAFT 2016 | AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
| DSCC 89024 : E | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .250 INCH BY .260 INCH BODY SIZE |
| SAE AMS 4027 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.