MIL-DTL-24800 Base Document:1996
Current
Current
The latest, up-to-date edition.
CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Establishes requirements for an aqueous, inorganic cleaning compound to be used in immersion, ultrasonic, spray and pumped cleaning of oxygen system piping and components.
| Committee |
FSC 6850
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-STD-1330 Revision D:1996 | STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS |
| DEFSTAN 68-278/1(2007) : 2007 | CLEANING PROCEDURES AND STANDARDS FOR DIVING AND MARINE OXYGEN SYSTEM COMPONENTS |
| MIL-STD-1622 Revision B:1999 | STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS |
| DEFSTAN 68-278/2(2016) : 2016 | CLEANING PROCEDURES & STANDARDS FOR NAVAL OXYGEN SYSTEM COMPONENTS |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| DOD L 24574 : (1) | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
| ASTM D 2287 : 2012 : REDLINE | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL-P-24691-3 Base Document:1987 | Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded |
| ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| MIL G 27617 : E | GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 2116 : 2016 : REDLINE | Standard Specification for FEP Resin Molding and Extrusion Materials |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| ASTM D 543 : 2014 : REDLINE | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| MIL-S-23008 Revision D:1988 | STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH ((HY-80 AND HY-100) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM G 72 : 2001 | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| MIL L 9000 : H | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 1292 : 2015 : REDLINE | Standard Test Method for Odor in Water |
| ASTM D 1331 : 2014 : REDLINE | Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials |
| ASTM D 4779 : 1993 | Standard Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection (Withdrawn 2002) |
| ASTM D 3935 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
| ASTM D 3921 : 1996 | Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| MIL-S-21923 Base Document:1959 | SYNTHETIC RUBBER COMPOUND, BUTADIENE STYRENE TYPE, OZONE RESISTANT, FOR LOW TEMPERATURE SERVICE |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| A-A-50433 Base Document:1989 | GREASE, SEA WATER WASH RESISTANT |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S 736 |
| ASTM D 2512 : 2017 | Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023) |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C) |
| MIL-T-24107 Revision B:1987 | TUBE, COPPER (SEAMLESS) (COPPER ALLOY NUMBERS C10100, C10200, C10300, C10800, C12000, C12200 AND C14200) |
| MIL G 22050 : D | GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES |
| ASTM D 1280 : 2014 : REDLINE | Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners |
| MIL F 22606 : C | FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN |
| MIL-STD-1330 Revision D:1996 | STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 2579 : 1993 : EDT 1 | Standard Test Method for Total Organic Carbon in Water (Withdrawn 2002) |
| MIL-C-15726 Revision F:1988 | COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE |
| ASTM D 1784 : 2011 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.