Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-DTL-24299 Revision B:2017

Current

Current

The latest, up-to-date edition.

HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD

Available format(s)

PDF

Language(s)

English

$32.74
Including GST where applicable

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Specifies naval shipboard heaters that are stationary, self-contained, and electrically operated, which are controlled and monitored by an external supervisory network or a human watchstander.

Committee
FSC 4540
DevelopmentNote
Supersedes MIL H 24299 (A). (10/2017)
DocumentType
Standard
Pages
19
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

NASM 35649 : 2002 NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B
QQ-N-286 Revision G:2000 NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500)
MIL-DTL-5624 Revision W:2016 TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
MIL-STD-769 Revision K:2015 Insulation Requirements for U.S. Naval Vessels
MIL-DTL-2212 Revision K:2014 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
ASTM A 204/A204M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
MIL-G-24716 Revision A:1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND
SAE AMS 3216 : 2005 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
MIL-PRF-17331 Revision K:2013 LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE
MIL-DTL-1222 Revision J:2000 STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
MIL-P-24691-1 Base Document:1987 Pipe And Tube, Carbon Steel, Seamless
MS18229 Revision C:2017 PLUG FOR O-RING GASKET
MIL-DTL-901 Revision E:2017 Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for
NASM17830:2017 NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEGREES F AND 450 DEGREES F, NON-METALLIC INSERT, 300 SERIES CRES
MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-DTL-16884 Revision P:2017 FUEL, NAVAL DISTILLATE
MIL-T-24388 Revision C:1990 THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD)
SAE J 1926/1 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
MIL-PRF-9000 Revision L:2014 Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel
NASM21044:1998 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEGREES F, 125 KSI FTU AND 60 KSI FTU
NAVSEA S9074 AR GIB 010/278 : 0 REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS
MIL H 22577 : C HEATING ELEMENTS, ELECTRICAL, CARTRIDGE, SHIP AND TUBULAR TYPE
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
NASM15795:2014 WASHER, FLAT, METAL, ROUND, GENERAL PURPOSE
MIL-HDBK-217 Revision F:1991 RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
NASM16187:2018 STUD, CONTINUOUS THREAD, BOLT-STUD, B16 ALLOY STEEL, HIGH TEMPERATURE SERVICE 875-1,000 DEGREES F
MIL-P-24691 Base Document:1987 PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR
SAE AMS 3218 : 2005 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95
MIL-STD-1399-300 Revision B:2008 ELECTRIC POWER, ALTERNATING CURRENT
MIL-PRF-23648 Revision F:2005 Resistor, Thermal (Thermistor) Insulated, General Specification for
NASM17828:2013 NUT, SELF-LOCKING, HEXAGON REGULAR-HEIGHT, (NON-METALLIC INSERT) 250 DEGREES F OR 450 DEGREES F, NICKEL-COPPER ALLOY
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASTM F 2329/F2329M : 2015 : REDLINE Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
MIL-HDBK-470 Revision A:1997 Designing and Developing Maintainable Products and Systems, Volume I
MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
MIL-DTL-2036 Revision E:2014 ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD
TT-P-645 Revision C:2013 PAINT, ALKYD TYPE, FORMULA NUMBER 84
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
MIL-PRF-1149 Revision D:1998 GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
NASM17829:2012 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEGREES F, NON-METALLIC INSERT, NON-CRES STEEL
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
FED-STD-791 Revision D:2007 TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS
MIL-DTL-15090 Revision E:2010 ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111)
MIL-PRF-20042 Revision F:2015 FLANGES, PIPE, BRONZE (SILVER BRAZING)
MIL-C-15726 Revision F:1988 COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE
NASM35307:2015 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSIONRESISTING, PASSIVATED, UNC-2A
MIL-STD-167-1 Revision A:2005 MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.