MIL-DTL-24151 Revision B:2016
Current
Current
The latest, up-to-date edition.
DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies roller curtain doors, hinged slatted doors, and associated operating equipment used for a wide variety of applications on naval ships.
| Committee |
FSC 2040
|
| DevelopmentNote |
Supersedes MIL D 24151 (A). (10/2016)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 709 : 2017 : REDLINE | Standard Specification for Laminated Thermosetting Materials |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| SAE AS 15000 : 2005 | FITTING END, LUBRICATION, HYDRAULIC - DESIGN STANDARD |
| SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| A-A-52414 Revision B:2012 | BEARING, ROLLER, THRUST |
| MIL-PRF-2765 Revision E:2004 | Rubber Sheet, Strip, Extruded, and Molded Shapes, Synthetic, Oil Resistant |
| MIL-DTL-2212 Revision K:2014 | CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES |
| SAE AS 15720 : 2010 | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE 7 |
| MIL-STD-3020 Base Document:2007 | Fire Resistance of U.S. Naval Surface Ships |
| MIL-PRF-32006 Base Document:2004 | PROGRAMMABLE CONTROLLER, NAVAL SHIPBOARD |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| SAE AS 15004 : 2010 | FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE 4 |
| MIL-HDBK-781 Revision A:1996 | RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| MIL C 24707/1 : 0 | CASTINGS, FERROUS, FOR MACHINERY AND STRUCTURAL APPLICATIONS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| MIL-DTL-16392 Revision D:2015 | BRAKE, ELECTRO-MECHANICAL, NAVAL SHIPBOARD |
| OO-K-220 Revision C:2015 | KEY, MACHINE |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| MIL-PRF-32168 Base Document:2004 | VARIABLE SPEED DRIVE SYSTEM FOR INDUCTION AND SYNCHRONOUS MACHINES |
| FF-S-92 Revision C:2014 | SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| MIL-HDBK-267 Revision A:1987 | GUIDE FOR SELECTION OF LUBRICANTS & HYDRAULIC FLUIDS FOR USE IN SHIPBOARDS EQUIPMENT |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| SAE AS 15005 : 2010 | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE 5 |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| SAE AS 15721 : 2010 | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION RESISTANT STEEL, TYPE 8 |
| ASTM A 380/A380M : 2017 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.