JIS K 6900:1994
Current
Current
The latest, up-to-date edition.
Glossary Of Terms Used In Plastic Industry
Available format(s)
Hardcopy
Language(s)
Japanese
Published date
28-02-1994
Publisher
| DocumentType |
Standard
|
| Pages |
0
|
| ProductNote |
THIS STANDARD IS IDENTICAL:ISO 472:1988
|
| PublisherName |
Japanese Standards Association
|
| Status |
Current
|
94(R1999) [20/10/1999]
94 [01/01/1994]
77
| JIS K 6851:1994 | Testing methods for tensile shear strength of wood-to-wood adhesive bonds<br> |
| JIS K 7077:1991 | Testing method for charpy impact strength of carbon fiber reinforced plastics |
| JIS Z 1711:1994 | Polyethylene Film Bags |
| JIS K 7195:1993 | Testing method for heat sag of plastics |
| JIS S 6023:1992 | Glues |
| JIS K 6935-2:1999 | Plastics - Fluoropolymer Dispersions And Moulding And Extrusion Materials - Part 2: Preparation Of Test Specimens And Determination Of Properties |
| JIS K 6854-4:1999 | Adhesives - Determination Of Peel Strength Of Bonded Assemblies - Part 4: Floating-roller Method |
| JIS K 7106:1995 | Testing method for stiffness of plastics by means of a cantilever beam |
| JIS K 7201:1995 | Testing Method For Flammability Of Polymeric Materials Using The Oxygen Index Method |
| JIS K 6916:2006 | Urea-formaldehyde Molding Compounds |
| JIS K 7154-2:2002 | Plastics - Injection Moulding Of Test Specimens Of Thermosetting Powder Moulding Compounds (pmcs) - Part 2: Small Plates |
| JIS K 7131:1994 | Testing method for thermally stimulated current of plastic films |
| JIS K 6852:1994 | Testing methods for shear strength of adhesive bonds by compression loading |
| JIS K 6940:1998 | Glass flakes vinyl ester resin lining films |
| JIS K 6849:1994 | Testing Methods For Tensile Strength Of Adhesives |
| JIS TS Z0011:2005 | Densified Refuse Derived Fuel |
| JIS K 6777:2007 | Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply |
| JIS K 7079:1991 | Testing methods for in-plane shear properties of carbon fiber reinforced plastics by plus and minus 45 degrees tension method and two pairs of rails method |
| JIS K 6776:2007 | Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply |
| JIS K 7205:1995 | Testing method for abrasion resistance of plastics by abrasive |
| JIS K 6916-1:2006 | Plastics - Urea-formaldehyde Moulding Compounds - Part 1: Designation System And Basis For Specifications |
| JIS K 6854-3:1999 | Adhesives - Determination Of Peel Strength Of Bonded Assemblies - Part 3: Adhesives - 180 Degrees Peel Test For Flexible-to-flexible Bonded Assemblies (t-peel Test) |
| JIS K 6717-1:2006 | Plastics - Poly (methyl Methacrylate) (pmma) Moulding And Extrusion Materials - Part 1: Designation System And Basis For Specifications |
| JIS K 6773:1999 | Polyvinylchloride Waterstop |
| JIS Z 7121:2007 | Methods Of Life Cycle Inventory Studies On Plastics Including Recycling Stages |
| JIS K 7215:1986 | Testing methods for durometer hardness of plastics |
| JIS K 6930:1994 | Reclaimed granular molding materials of agricultural polyvinyl chloride film |
| JIS K 6831:2003 | Adhesives - Determination of temperature dependence of adhesive bonds |
| JIS TS K0005:2008 | Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
| JIS K 7062:1992 | Testing method for izod impact strength of glass fiber reinforced plastics |
| JIS K 7137-1:2001 | Plastics - Polytetrafluoroethylene (ptfe) Semi-finished Products - Part 1: Requirements And Designation |
| JIS Z 7302-6:1999 | Densified Refuse Derived Fuel - Part 6: Test Method For Total Chlorine Contents |
| JIS K 7072:1991 | Preparation of carbon fibre reinforced plastic panels for test purpose |
| JIS C 8435:1999 | Boxes And Box Covers Of Plastic Conduits |
| JIS K 7129:1992 | Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method) |
| JIS K 6855:1994 | Testing methods for impact shear strength of adhesive bonds |
| JIS K 7223:1996 | Testing method for water absorption capacity of super absorbent polymers |
| JIS K 7088:1996 | Testing methods for flexural creep of carbon fibre reinforced plastics |
| JIS TR K0005:2001 | Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
| JIS K 6775-1:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 1: Heatfusion fittings |
| JIS K 6741:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipes |
| JIS K 7120:1987 | Testing methods of plastics by thermogravimetry |
| JIS K 6778:2004 | Polybutene (PB) pipes |
| JIS K 7105:1981 | Testing methods for optical properties of plastics |
| JIS TR Z0014:1999 | Densified Refuse Derived Fuel - Test Method For Ultimate Analysis |
| JIS Z 1604:2006 | Plugs and flanges for steel drums |
| JIS K 7090:1996 | Testing method for ultrasonic pulse echo technique of carbon fibre reinforced plastic panels |
| JIS K 7117:1987 | Testing Methods For Viscosity With A Rotational Viscometer Of Resins In The Liquid Form |
| JIS K 6883:2008 | Plastics - Perfluoroalkoxyalkane (pfa) Tubes |
| JIS S 2029:2002 | Plastics Table Wares |
| JIS K 7012:1999 | Glass-fiber reinforced thermosetting resin chemical-resistant tanks |
| JIS K 6742:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply |
| JIS K 6775-2:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 2: Spigot fittings |
| JIS S 6032:2004 | Plastics rulers |
| JIS K 7082:1993 | Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics |
| JIS K 7224:1996 | Testing method for water absorption rate of super absorbent polymers |
| JIS Z 0238:1998 | Testing methods for heat sealed flexible packages |
| JIS K 7231:1986 | General rules for testing methods of epoxide resins and hardeners |
| JIS S 2041:1995 | Plastics washing basins |
| JIS S 2047:1995 | Plastics food receptacles with lids for table use |
| JIS K 6739:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for drain |
| JIS K 5500:2000 | Glossary Of Paint Terms |
| JIS K 6915-2:2006 | Plastics - Phenolic Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
| JIS K 6792:2004 | Polybutene (PB) pipes for water supply |
| JIS K 6867:1999 | Adhesives - Characterization Of Durability Of Structural-adhesive-bonded Assemblies - Wedge Rupture Test |
| JIS K 6743:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply |
| JIS K 7197:1991 | Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis |
| JIS S 2048:2006 | Portable cooling boxes |
| JIS K 6894:1996 | Fluoroplastic coating film on metal substrate |
| JIS K 7070:1999 | Testing Method For Chemical Resistance Of Fiber Reinforced Plastics |
| JIS K 7238:1991 | Designation of epoxide resins |
| JIS TR Z0013:1999 | Densified Refuse Derived Fuel - Test Method For Apparent Bulk Density |
| JIS TR K0006:2002 | Plastics - Determination Of The Thermal Properties In Between Room Temperature And Decomposition And/or Vaporization Temperature |
| JIS K 7137-2:2001 | Plastics - Polytetrafluoroethylene (ptfe) Semi-finished Products - Part 2: Preparation Of Test Specimens And Determination Of Properties |
| JIS K 7010:1995 | Vocabulary for fibre reinforced plastic |
| JIS K 7171:2008 | Plastics - Determination of flexural properties |
| JIS K 7216:1980 | Testing method for brittleness temperature of plastics |
| JIS K 7089:1996 | Testing method for compression after impact properties of carbon fibre reinforced plastics |
| JIS K 7080:1991 | Testing methods for bearing strength of carbon fiber reinforced plastics |
| JIS S 2040:1994 | Large plastics lockable containers for household wares |
| JIS Z 0107:1974 | Glossary Of Terms Used In Wooden Box For Packing |
| JIS K 7081:1993 | Testing method for exposure to natural weathering of carbon fibre reinforced plastic |
| JIS K 7203:1995 | Testing Method For Flexural Properties Of Rigid Plastics |
| JIS K 6788:2004 | Crosslinked polyethylene (PE-X) pipe fittings for water supply |
| JIS TR K0008:2003 | Plastics - Determination Of Dynamic Mechanical Properties By Compression Vibration Method |
| JIS K 6933:1999 | Plastics - Polyamides - Determination Of Viscosity Number |
| JIS K 7380:1999 | Plastics - Homopolymer And Copolymer Resins Of Vinyl Chloride - Determination Of Residual Vinyl Chloride Monomer - Gas Chromatographic Method |
| JIS K 7129:2008 | Plastics -Film and sheeting - Determination of water vapour transmission rate - Instrumental method |
| JIS B 7739:1989 | Pendulum-type impact testing machines for non-metallic materials |
| JIS K 6917-2:2006 | Plastics - Melamine-formaldehyde Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
| JIS K 7390:2003 | Testing methods for reclaimed poly (ethylene terephthalate) (PET) moulding materials from PET bottle |
| JIS C 8432:1999 | Fittings Of Unplasticized Polyvinyl Chloride (pvc-u) Conduits |
| JIS Z 7302-3:1999 | Densified Refuse Derived Fuel - Part 3: Test Method For Moisture |
| JIS Z 1716:2004 | Non-oriented polyethylene terephthalate (PET) sheets and films for packaging |
| JIS K 6804:2003 | Poly(vinylacetate) Emulsion Adhesives For Woods |
| JIS K 7083:1993 | Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics |
| JIS K 7154-1:2002 | Plastics - Injection Moulding Of Test Specimens Of Thermosetting Powder Moulding Compounds (pmcs) - Part 1: General Principles And Moulding Of Multipurpose Test Specimens |
| JIS K 7111:1996 | Plastics - Determination of charpy impact strength |
| JIS K 7074:1988 | Testing methods for flexural properties of carbon fiber reinforced plastics |
| JIS K 7113:1995 | Testing method for tensile properties of plastics |
| JIS K 7301:1995 | Testing methods for tolylene diisocyanate type prepolymers for thermosetting urethane elastomers |
| JIS K 7011:1989 | Glass fiber reinforced plastics for structural use |
| JIS A 1454:2005 | Test Methods - Resilient Floorcoverings |
| JIS K 7014:1997 | Fittings and joints for fibre reinforced plastic pipes |
| JIS K 7078:1991 | Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method |
| JIS K 6761:2004 | Polyethylene pipes for General Purposes |
| JIS K 7212:1999 | General Rules For Tests For Thermal Ageing Properties Of Thermoplastics In The Form Of Sheet By Means Of Ovens |
| JIS K 6856:1994 | Testing methods for flexural strength of adhesive bonds |
| JIS K 7194:1994 | Testing method for resistivity of conductive plastics with a four-point probe array |
| JIS Z 7302-1:1999 | Densified Refuse Derived Fuel - Part 1: General Principles Of Testing Method |
| JIS Z 7302-8:2002 | Densified Refuse Derived Fuel - Part 8: Test Method For Ultimate Analysis |
| JIS K 7073:1988 | Testing method for tensile properties of carbon fiber reinforced plastics |
| JIS R 1662:2004 | Testing Method For Fracture Energy Of Fibre-reinforced Ceramic Matrix Composites |
| JIS TR Z0011:2002 | Densified Refuse Derived Fuel |
| JIS K 7087:1996 | Testing methods for tensile creep of carbon fibre reinforced plastics |
| JIS K 7013:1997 | Fibre reinforced plastic pipes |
| JIS F 0701:1989 | Criteria For Selection Of Plastics Used For Marine Electrical Appliances |
| JIS K 7115:1999 | Plastics - Determination of creep behaviour - Part 1: Tensile creep |
| JIS G 3443-3:2007 | Coated steel pipes for water service Part 3: External plastic coatings |
| JIS K 7312:1996 | Physical testing methods for molded products of thermosetting polyurethane elastomers |
| JIS Z 1655:1993 | Plastic Returnable Containers |
| JIS TS K0008:2008 | Plastics - Determination Of Dynamic Mechanical Properties By Compression Vibration Method |
| JIS Z 0108:2005 | Glossary of terms for packaging |
| JIS Z 7302-4:1999 | Densified Refuse Derived Fuel - Part 4: Test Method For Ash |
| JIS K 7110:1999 | Method Of Izod Impact Test For Rigid Plastics |
| JIS K 7142:1996 | Determination of the refractive index of plastics |
| JIS K 7086:1993 | Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics |
| JIS C 9912:2007 | The Marking For Identification Of Plastic Parts For Electrical And Electronic Equipment |
| JIS K 7015:1998 | Pultruded fibre reinforced plastics |
| JIS S 2032:1995 | Plastics buckets |
| JIS TR Z0012:1999 | Densified Refuse Derived Fuel - Test Method For Sulfur Content |
| JIS K 6917:2006 | Melamine-formaldehyde Molding Compounds |
| JIS K 6770:2004 | Crosslinked polyethylene (PE-X) pipe fittings |
| JIS K 7061:1992 | Testing method for charpy impact strength of glass fiber reinforced plastics |
| JIS K 6935-1:1996 | Plastics - Fluoropolymer Dispersions And Moulding And Extrusion Materials - Part 1: Designation System And Basis For Specifications |
| JIS K 7218:1986 | Testing methods for sliding wear resistance of plastics |
| JIS K 6774:2005 | Polyethylene pipes for the supply of gaseous fuels |
| JIS K 7091:1996 | Testing method for radiography of carbon fibre reinforced plastic panels |
| JIS K 6807:1999 | Test Methods For Formaldehyde Resin Liquid Adhesives For Wood |
| JIS S 6051:2006 | Plastics card cases |
| JIS K 7196:1991 | Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis |
| JIS E 3023:1992 | Insulating materials of insulated rail joint - Test methods |
| JIS K 6863:1994 | Testing Methods For The Softening Point Of Hot Melt Adhesives |
| JIS K 6762:2004 | Double wall polyethylene pipes for water supply |
| JIS Z 7302-10:2002 | Densified Refuse Derived Fuel - Part 10: Test Method For Disintegrated Contents |
| JIS K 7116:1999 | Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading |
| JIS K 7085:1993 | Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics |
| JIS K 9797:2006 | Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled solid core |
| JIS Z 4808:2002 | Glove box for handling of radioactive substance |
| JIS K 6848-3:1999 | Adhesives - Testing Methods Of Bonding Strength Of Adhesives - Part 3: Guidelines For The Surface Preparation Of Plastics |
| JIS K 6862:1984 | Testing methods for melt viscosity of hot-melt adhesives |
| JIS K 7122:1987 | Testing methods for heat of transitions of plastics |
| JIS K 7123:1987 | Testing methods for specific heat capacity of plastics |
| JIS K 6793:2004 | Polybutene (PB) pipe fittings for water supply |
| JIS K 6853:1994 | Testing methods for cleavage strength of adhesive bonds |
| JIS K 6828:1996 | Testing methods for synthetic resin emulsions |
| JIS K 7075:1991 | Testing methods for carbon fiber content and void content of carbon fiber reinforced plastics |
| JIS H 7008:2002 | Glossary Of Terms Used In Ultrafine Metal Particles |
| JIS TR K0001:2000 | Testing Methods For Reclaimed (poly Ethylene Terephthalate) (pet) Molding Materials From Pet Bottle |
| JIS K 7076:1991 | Testing methods for compressive properties of carbon fibre reinforced plastics |
| JIS K 6916-2:2006 | Plastics - Urea-formaldehyde Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
| JIS Z 0109:1992 | Glossary of terms used in pressure sensitive adhesive tapes and sheets |
| JIS C 6481:1996 | Test methods of copper-clad laminates for printed wiring boards |
| JIS K 7128-3:1998 | Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3: Right angled tear method |
| JIS S 2049:1993 | Plastic Receptacles For Homemade Tukemono (japanese Pickles) |
| JIS K 7211:1976 | General rules for testing impact strength of rigid plastics by the falling weight method |
| JIS Z 7302-2:1999 | Densified Refuse Derived Fuel - Part 2: Test Method For Gross Calorific Value |
| JIS K 7214:1985 | Testing methods for shear strength of plastics by punch tool |
| JIS K 6775-3:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 3: Electrofusion fittings |
| JIS K 6919:1992 | Liquid Unsaturated Polyester Resins For Fiber Reinforced Plastics |
| JIS K 6915-1:2006 | Plastics - Phenolic Moulding Compounds - Part 1: Designation System And Basis For Specifications |
| JIS TS R0002:2008 | Testing Method For Crack Growth Resistance (r-curve) Of Fine Ceramics |
| JIS K 7092:2005 | Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen |
| JIS K 6833:1994 | General testing methods for adhesives |
| JIS K 7118:1995 | General rules for testing fatigue of rigid plastics |
| JIS K 6910:2007 | Testing Methods For Phenolic Resins |
| JIS K 7200:1986 | Standard reference test specimens for calibrating a laboratory light exposure apparatus |
| JIS K 6915:2006 | Phenolic Molding Compounds |
| JIS K 6780:2003 | Profile wall polyethylene pipes |
| JIS K 6769:2004 | Crosslinked polyethylene (PE-X) pipes |
| JIS Z 7302-5:2002 | Densified Refuse Derived Fuel - Part 5: Test Method Of Metals Contents |
| JIS Z 7302-7:2002 | Densified Refuse Derived Fuel - Part 7: Test Method For Sulfur Content |
| JIS K 6779:2004 | Polybutene (PB) pipe fittings |
| JIS Z 7302-9:2002 | Densified Refuse Derived Fuel - Part 9: Test Method For Apparent Bulk Density |
| JIS K 9798:2006 | Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled foamed core |
| JIS K 7084:1993 | Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test |
| JIS K 6932:2007 | Recycled plastics stakes |
| JIS K 6787:2004 | Crosslinked polyethylene (PE-X) pipes for water supply |
| JIS K 7374:2007 | Plastics - Determination Of Image Clarity |
| JIS K 6931:1991 | Reclaimed plastics bars, rods, plates and piles |
| JIS K 6917-1:2006 | Plastics - Melamine-formaldehyde Moulding Compounds - Part 1: Designation System And Basis For Specifications |
| JIS K 6833-1:2008 | Adhesives - General testing methods Part 1: General properties |
| JIS K 6859:1994 | Testing methods for creep rupture of adhesive bonds |
| JIS K 7071:1988 | Testing methods for prepreg, carbon fiber and epoxy resins |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.