JIS C 5260-2:2000
Current
Current
The latest, up-to-date edition.
Potentiometers For Use In Electronic Equipment - Part 2 - Sectional Specification: Lead-screw Actuated And Rotary Preset Potentiometers
Available format(s)
Hardcopy
Language(s)
Japanese
Published date
30-06-2000
Publisher
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Japanese Standards Association
|
Status |
Current
|
2000(R2009) [01/10/2009]
2000 [20/04/2000]
JIS C 60068-2-17:2001 | Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing Part 2: Tests - Test Q: Sealing |
JIS C 60068-2-11:1989 | Basic environmental testing procedures Part 2: Tests - Test Ka: Salt mist |
JIS C 60068-2-32:1995 | Environmental testing Part 2: Tests. Test Ed: Free fall |
JIS C 60068-2-45:1995 | Environmental testing procedures of electronic and electrical resistance to solvents (immersion in cleaning solvents) |
JIS C 0066:2001 | Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
JIS C 60695-7-1:1997 | Fire hazard testing Part 7: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1: General |
JIS C 60068-2-54:1996 | Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method |
JIS C 60068-2-56:1996 | Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment |
JIS C 60068-2-53:1997 | Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests |
JIS C 60068-2-51:1997 | Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
JIS C 5063:1997 | Preferred number series for resistors and capacitors |
JIS C 60068-2-50:1997 | Basic environmental testing procedures Part 2: Tests Tests Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
JIS C 0046:1993 | Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer |
JIS C 60068-2-20:1996 | Basic environmental testing procedures Part 2: Tests. Test T: Soldering |
JIS C 60068-1:1993 | Environmental testing Part 1: General and guidance |
JIS C 60695-11-3:1997 | Fire hazard testing Part 2: Test methods - Section 4/sheet 2: 500 W nominal test flames and guidance |
JIS C 60068-3-1:1995 | Background information, Section One - Cold and dry heat tests |
JIS C 60068-2-64:1997 | Environmental testing Part 2: Test methods - Test Fh: Vibration, broad-band random (digital control) and guidance |
JIS C 60695-2-13:2004 | Fire hazard testing - Glow-wire ignitability test method for materials |
JIS C 60695-2-12:2004 | Fire hazard testing - Glow-wire flammability test method for materials |
JIS C 60068-2-61:1996 | Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence |
JIS C 60068-2-31:1995 | Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens |
JIS C 5260-1:1999 | Potentiometers for use in electronic equipment Part 1: Generic specification |
JIS C 60068-2-60:1999 | Environmental testing Part 2: Tests - Test Ke: Flowing mixed gas corrosion test |
JIS C 60068-2-47:2008 | Environmental testing Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests |
JIS C 60068-2-28:1993 | Environmental testing, Part 2: Tests - Guidance for damp heat tests |
JIS C 60355:1993 | An appraisal of the problems of accelerated testing for atmospheric corrosion |
JIS C 60695-5-2:1999 | Part 5: Assessment of potential corrosion damage by fire effluent - Section 2: Guidance on the selection and use of test methodsFire hazard testing -- Part 5: Assessment of potential corrosion damage by fire effluent -- Section 2: Guidance on the selection and use of test methods |
JIS C 60068-2-13:1989 | This Japanese Industrial Standard specifies the low pressure tests performed at room temperature. Part 2: Tests, Test M: Low air pressure |
JIS C 60695-1-2:1993 | Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electerotechnical products Guidance for electronic components |
JIS C 60695-1-3:1993 | Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products Guidance for use preselection procedures |
JIS C 60695-4:1999 | Terminology concerning fire test |
JIS C 60695-2-2:2000 | Fire hazard testing Part 2: Test methods - Section 2 - Needle-flame test |
JIS C 60068-2-7:1993 | Basic environmental testing procedures Part 2: Tests -- Test Ga and guidance: Acceleration, steady state Part 2: Tests - Test Ga and guidance: Acceleration, steady state |
JIS C 60068-2-49:1993 | Basic environmental testing procedures Part 2: Tests Guidance to Test Kc: Sulphur dioxide test for contacts and connections Part 2: Tests Guidance to Test Kc: Sulphur dioxide test for contacts and connections |
JIS C 60695-2-4-0:1995 | Fire hazard testing Part 2: Test methods - Section 4/sheet 0: Diffusion type and premixed type flame test methods |
JIS C 60068-2-40:1995 | Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests |
JIS C 60068-2-41:1995 | Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests |
JIS C 60068-2-46:1993 | Basic environmental testing procedures Part 2: Tests Guidance to Test Kd: Hydrogen sulphide test for contacts and connections |
JIS C 60068-2-43:1993 | Basic environmental testing procedures Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections |
JIS C 60068-2-58:2006 | Environmental Testing - Part 2: Tests - Test Td: Test Methods For Solderability, Resistance To Dissolution Of Metallization And To Soldering Heat Of Surface Mounting Devices (smd) |
JIS C 60695-2-11:2004 | Fire hazard testing - Glow-wire flammability test method for end-products |
JIS C 60695-11-2:2007 | Fire hazard testing Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
JIS C 60068-2-18:2007 | Environmental testing -- Part 2-18: Tests -- Test R and guidance: Water Part 2-18: Tests - Test R and guidance: Water |
JIS C 60695-5-1:1996 | Fire hazard testing Part 5: Assessment of potential corrosion damage by fire effluent - Section 1: General guidance |
JIS C 60068-2-21:2002 | Environmental testing Part 2-21: Tests - Test U: Robustness of termination and integral mounting devices |
JIS C 5260-2-1:2000 | Potentiometers For Use In Electronic Equipment - Part 2 - Blank Detail Specification: Lead-screw Actuated And Rotary Preset Potentiometers Assessment Level E |
JIS C 5260-2-2:2000 | Potentiometers For Use In Electronic Equipment - Part 2 - Blank Detail Specification: Lead-screw Actuated And Rotary Preset Potentiometers Assessment Level F |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.