JIS B 0142:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Glossary Of Terms For Oil Hydraulics And Pneumatics
Available format(s)
Hardcopy
Superseded date
01-04-2011
Superseded by
Language(s)
Japanese
Published date
01-03-1994
Publisher
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy |
94(R2001) [20/08/2001]
94 [01/03/1994]
84
| JIS B 8375:1993 | Pneumatic System - 4-port And 5-port Solenoid Operated Valves |
| JIS B 8374:1993 | Pneumatic system - 3-port solenoid operated valves |
| JIS B 8373:1993 | Pneumatic system - 2-port solenoid operated valves |
| JIS Z 8116:1994 | Glossary Of Terms Used In Automatic Control (general) |
| JIS B 0116:1978 | Glossary of terms for packings and gaskets |
| JIS B 8660:2000 | Hydraulic Fluid Power - Valves Controlling Flow And Pressure - Test Methods |
| JIS B 8352:1999 | Gear Pumps For Hydraulic Use |
| JIS B 8356-7:2006 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance - Part 7: Evaluation Of Differential Pressure Versus Flow Characteristics |
| JIS B 8403-1:2005 | Pneumatic Fluid Power - Cylinders, 1 Mpa Series - Accessory Mounting Dimensions - Part 1: Rod End Spherical Eyes |
| JIS B 8377-2:2002 | Fluid Power Systems And Components - Inspection And Test Of Cylinders - Part 2: Acceptance Tests For Hydraulic Cylinders |
| JIS B 8396:2000 | Hydraulic Fluid Power - Cylinders - Housings For Piston And Rod Seals In Reciprocating Applications - Dimensions And Tolerances |
| JIS B 8651:2002 | Test Methods For Electro-hydraulic Proportional Pressure Relief Valves |
| JIS B 9934:2000 | Hydraulic Fluid Power - Determination Of Particulate Contamination By Automatic Counting Using The Light Extinction Principle |
| JIS B 8386:2000 | Hydraulic Fluid Power - Valves - Determination Of Pressure Differential/flow Characteristics |
| JIS B 8371-2:2000 | Pneumatic Fluid Power - Compressed Air Filters - Part 2: Test Methods To Determine The Main Characteristics To Be Included In Supplier's Literature |
| JIS B 8404-3:2005 | Hydraulic Fluid Power - Cylinders - 16 Mpa Medium And 25 Mpa Series - Accessory Mounting Dimensions - Part 3: Rod End And Bracket |
| JIS B 8381-2:2008 | Connectors For Pneumatic Fluid Power - Part 2: Connectors For Thermoplastic Tubes |
| JIS B 8670:2004 | Fluid Power Systems And Components - Nominal Pressures |
| JIS B 8376:1994 | Speed control valves for pneumatic use |
| JIS B 8659-2:2002 | Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 2: Test Methods For Three-way Directional Flow Control Valves |
| JIS B 8671:2006 | Hydraulic Fluid Power - Compatibility Between Fluids And Standard Elastomeric Materials |
| JIS B 8668:2006 | Hydraulic Fluid Power - Two-port Slip-in Cartridge Valves - Cavities |
| JIS B 8392-5:2005 | Compressed air Part 5: Test methods for oil vapour and organic solvent content |
| JIS B 8661:2002 | Test Methods For Electronically Controlled Oil Hydraulic Pumps |
| JIS B 8404-4:2005 | Hydraulic Fluid Power - Cylinders - 16 Mpa Compact Series With Bores From 32 Mm To 200 Mm - Accessory Mounting Dimensions - Part 4: Rod End And Bracket |
| JIS B 8356-3:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 3: Filter Elements - Verification Of Collapse/burst Resistance |
| JIS B 0125-2:2001 | Fluid power systems and components - Graphic symbols and circuit diagrams Part 2: Circuit diagrams |
| JIS B 8349-2:2004 | Hydraulic Fluid Power - Determination Of Pressure Ripple Levels Generated In Systems And Components - Part 2: Simplified Method For Pumps |
| JIS B 8372-1:2003 | Pneumatic fluid power - Compressed air pressure regulators and filter-regulators Part 1: Main characteristics to be included in literature from suppliers and product-making requirements |
| JIS B 8404-1:2005 | Hydraulic Fluid Power - Cylinders - 16 Mpa Medium And 25 Mpa Series - Accessory Mounting Dimensions - Part 1: Rod End Plain Eyes |
| JIS B 8654:2002 | Test Methods For Electro-hydraulic Proportional Series Flow Control Valves |
| JIS B 8368-4:2002 | Mounting Dimensions For Pneumatic Cylinders - Part 4: Single Rod - 1 Mpa Series, Space Saving Cylinders (bores From 20 Mm To 100 Mm) |
| JIS B 2292-3:2000 | Hydraulic Fluid Power - Positive Displacement Pumps And Motors - Dimensions And Identification Code For Mounting Flanges And Shaft Ends - Part 3: Polygonal Flanges (including Circular Flanges) |
| JIS B 9936:2001 | Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction Of Fluid Samples From Lines Of An Operating System |
| JIS B 8367-5:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 5: Single Rod - 10 Mpa Series, Square Cover And Tie Rod Tightened Type (bores From 40 Mm To 200 Mm) |
| JIS B 8381-1:2008 | Connectors For Pneumatic Fluid Power - Part 1: Push-in Connectors For Thermoplastic Tubes |
| JIS B 8356-1:2017 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 1: Filter Elements - Procedure For Verifying Performance Characteristics |
| JIS B 8368-3:2002 | Mounting Dimensions For Pneumatic Cylinders - Part 3: Single Rod - 1 Mpa Series, Small Bore With Fixed And Detachable Mounting Device Type (bores From 8 Mm To 25 Mm) |
| JIS B 9938:2002 | Hydraulic Fluid Power - Fire-resistant (fr) Fluids - Guidelines For Use |
| JIS B 8403-2:2005 | Pneumatic Fluid Power - Cylinders, 1 Mpa Series - Accessory Mounting Dimensions - Part 2: Rod End Clevis |
| JIS B 8392-6:2006 | Compressed air -- Part 6: Test methods for gaseous contaminant content<br> |
| JIS B 8375-2:2007 | Pneumatic Fluid Power - Five-port Directional Control Valves - Part 2: Mounting Interface Surfaces With Optional Electrical Connector |
| JIS B 8368-2:2002 | Mounting Dimensions For Pneumatic Cylinders - Part 2: Single Rod - 1 Mpa Series, Square Cover And Tie Rod Tightened Type With Detachable Mounting Devices (bores From 32 Mm To 320 Mm) |
| JIS B 8375-1:2007 | Pneumatic Fluid Power - Five-port Directional Control Valves - Part 1: Mounting Interface Surfaces Without Electrical Connector |
| JIS B 8392-8:2008 | Compressed Air - Part 8: Test Methods For Solid Particle Content By Mass Concentration |
| JIS B 8392-9:2008 | Compressed Air - Part 9: Test Methods For Liquid Water Content By Mass Concentration |
| JIS B 8348:2002 | Hydraulic Fluid Power - Pumps And Motors - Test Methods |
| JIS B 8367-6:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 6: Single Rod - 10 Mpa Series Space Saving Type (bores From 32 Mm To 100 Mm) |
| JIS B 8397-3:2001 | Hydraulic Fluid Power - Determination Of Characteristics Of Motors - Part 3: At Constant Flow And At Constant Torque |
| JIS B 8388:2000 | Fluid Power Systems And Components - Three-pin Electrical Plug Connectors With Earth Contact - Characteristics And Requirements |
| JIS B 8664:2008 | Hydraulic Fluid Power - Pressure-reducing Valves, Sequence Valves, Unloading Valves, Throttle Valves And Check Valves - Mounting Surfaces |
| JIS B 0132:2005 | Glossary Of Terms For Fans, Blowers And Compressors |
| JIS B 8395:2000 | Fluid Power Systems And Components - Cylinders - Housings For Rod Wiper Rings In Reciprocating Applications - Dimensions And Tolerances |
| JIS B 8356-2:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 2: Filter Elements - Verification Of Fabrication Integrity And Determination Of The First Bubble Point |
| JIS B 8653:2002 | Test Methods For Electro-hydraulic Proportional Metering Valves |
| JIS B 8398:2002 | Hydraulic Fluid Power - Gas-loaded Accumulators - Dimensions Of Gas Ports |
| JIS E 4001:1999 | Glossary Of Terms For Railway Rolling Stock (general) |
| JIS B 8367-4:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 4: Single Rod - 25 Mpa Series, Round Cover Types With Welded Or Threaded Flange (bores From 50 Mm To 500 Mm) |
| JIS B 8356-6:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 6: Filter Elements - Verification Of Flow Fatigue Characteristics |
| JIS B 8397:2002 | Hydraulic Fluid Power - Gas-loaded Accumulators With Separator - Ranges Of Pressures And Volumes And Characteristic Quantities |
| JIS B 0151:2001 | Iron and steel pipe fittings - Vocabulary |
| JIS B 8366-3:2000 | Fluid Power Systems And Components - Cylinder - Elements And Identification Code - Part 3: Basic Series Of Piston Strokes |
| JIS B 8379:1995 | Pneumatic Circuit - Silencers |
| JIS B 8652:2002 | Test Methods For Electro-hydraulic Proportional Pressure Reducing Valves And Electro-hydraulic Proportional Pressure Reducing And Relieving Valves |
| JIS B 8368-1:2002 | Mounting Dimensions For Pneumatic Cylinders - Part 1: Single Rod - 1 Mpa Series, Square Cover And Tie Rod Tightened Type With Fixed Mounting Devices (bores From 32 Mm To 250 Mm) |
| JIS B 8366-5:2006 | Fluid Power Systems And Components - Cylinders - Identification Code For Mounting Dimensions And Mounting Types |
| JIS B 8366-2:2000 | Fluid Power Systems And Components - Cylinder - Elements And Identification Code Part 2: Nominal Pressures |
| JIS B 8380:2002 | Pneumatic Fluid Power - Identification Of Ports And Control Mechanisms Of Control Valves And Other Components |
| JIS B 8656:2002 | Test Methods For Electro-hydraulic Proportional Bypass Flow Control Valves |
| JIS B 8377-1:2002 | Fluid Power Systems And Components - Inspection And Test Of Cylinders - Part 1: Acceptance Tests For Pneumatic Cylinders |
| JIS B 8392-3:2001 | Compressed Air - Part 3: Test Methods For Measurement Of Humidity |
| JIS B 8397-2:2008 | Hydraulic Fluid Power - Determination Of Characteristics Of Motors - Part 2: Startability |
| JIS B 8667:2004 | Hydraulic Fluid Power - Pressure Switches - Mounting Surfaces |
| JIS B 8358:2004 | Hydraulic fluid power - Bladder type accumulators - Test methods |
| JIS B 8657:2002 | Test Methods For Electro-hydraulic Proportional Directional Bypass Flow Control Valves |
| JIS B 8369:1999 | Fluid Power Cylinders - Dimensions Of Accessories |
| JIS B 8372-2:2003 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers<br> |
| JIS B 8366-1:2000 | Fluid Power Systems And Components - Cylinder - Elements And Identification Code - Part 1: Cylinder Bores And Piston Rod Diameters - Metric Series |
| JIS B 8367-1:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 1: Single Rod - 16 Mpa Series, Round Cover Type With Welded Or Threaded Flange (bores From 25 Mm To 500 Mm) |
| JIS B 9939-2:2003 | Hydraulic Fluid Power - Measurement Techniques - Part 2: Measurement Of Average Steady-state Pressure In A Closed Conduit |
| JIS B 8366-7:2001 | Fluid Power Systems And Components - Cylinder - Elements And Identification Code - Part 7: Hydraulic Fluid Power - Single Rod Cylinders, 16 Mpa Square Cover, Tie Rod Tightened Type Mounting Dimensions - Port Dimensions |
| JIS B 8387:2000 | Hydraulic Fluid Power - Four-port Modular Stack Valves And Four-port Directional Control Valves, Sizes 02, 03 And 05 - Clamping Dimensions |
| JIS B 8374:1993 | Pneumatic system - 3-port solenoid operated valves |
| JIS B 2292-2:2005 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series |
| JIS B 2351-1:2000 | Connections For Fluid Power And General Use - Part 1: 24 Degree Sign Compression Fittings |
| JIS B 8390:2000 | Pneumatic Fluid Power - Components Using Compressible Fluids - Determination Of Flow-rate Characteristics |
| JIS B 8350-2:2003 | Hydraulic Fluid Power - Test Code For Determination Of Airborne Noise Levels - Part 2: Motors |
| JIS B 8385:2000 | Hydraulic Fluid Power - Pumps, Motors And Integral Transmissions - Parameter Definitions And Letter Symbols |
| JIS B 8382:2000 | Hydraulic Fluid Power - Positive Displacement Pumps And Motors - Determination Of Derived Capacity |
| JIS B 9939-1:2003 | Hydraulic Fluid Power - Measurement Techniques - Part 1: General Measurement Principles |
| JIS B 8356-8:2002 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 8: Multi-pass Test Method For Evaluating Filtration Performance |
| JIS B 8399:2002 | Hydraulic Fluid Power - Gas-loaded Accumulators With Separator - Selection Of Preferred Hydraulic Ports |
| JIS B 9937:2001 | Hydraulic Fluid Power - Fluid Sample Containers - Qualifying And Controlling Cleaning Methods |
| JIS B 2355-3:2000 | Connections For Fluid Power And General Use - Ports And Stud Ends With Iso 261 Threads And O-ring Sealing - Part 3: Light Duty (l-series) Stud Ends - Dimensions, Design, Test Methods And Requirements |
| JIS B 2355-1:2000 | Connections For Fluid Power And General Use - Ports And Stud Ends With Iso 261 Threads And O-ring Sealing - Part 1: Ports With O-ring Seal In Truncated Housing |
| JIS B 8378-1:2000 | Pneumatic Fluid Power - Compressed Air Lubricators - Part 1: Main Characteristics To Be Included In Supplier's Literature And Product-marking Requirements |
| JIS B 8356-9:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 9: Filters - Statement Of Requirements |
| JIS B 8384:2000 | Hydraulic Fluid Power - Positive Displacement Pumps, Motors And Integral Transmissions - Determination Of Steady-state Performance |
| JIS B 8373:1993 | Pneumatic system - 2-port solenoid operated valves |
| JIS B 2408:2005 | O-rings - Quality acceptance criteria |
| JIS B 2355-2:2000 | Connections For Fluid Power And General Use - Ports And Stud Ends With Iso 261 Threads And O-ring Sealing - Part 2: Heavy Duty (s-series) Stud Ends - Dimensions, Design, Test Methods And Requirements |
| JIS B 8356-5:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 5: Filter Elements - Method For End Load Test |
| JIS B 8666:2001 | Hydraulic Fluid Power - Pressure-relief Valves - Mounting Surfaces |
| JIS B 8357:2000 | Pressure Compensating Type Flow Control Valves For Oil Hydraulic Use |
| JIS B 8367-2:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 2: Single Rod - 16 Mpa Series, Square Cover And Tie Rod Tightened Type (bores From 25 Mm To 200 Mm) |
| JIS B 8394-1:2000 | Hydraulic Fluid Power - Housings For Elastomer-energized, Plastic-faced Seals - Dimensions And Tolerances - Part 1: Piston Seal Housings |
| JIS B 8397-1:2008 | Hydraulic Fluid Power - Determination Of Characteristics Of Motors - Part 1: At Constant Low Speed And Constant Pressure |
| JIS B 2356-2:2000 | Connections For General Use And Fluid Power - Ports And Stud Ends With Iso 261 Threads With Elastomeric Or Metal-to-metal Sealing - Part 2: Stud Ends With Elastomeric Sealing (type E) |
| JIS B 0125-1:2007 | Fluid power systems and components - Graphic symbols and circuit diagrams Part 1: Graphic symbols for conventional use and data processing applications |
| JIS B 8371-1:2000 | Pneumatic Fluid Power - Compressed Air Filters - Part 1: Main Characteristics To Be Included In Supplier's Literature And Product-making Requirements |
| JIS B 8367-3:2002 | Mounting Dimensions For Hydraulic Cylinders - Part 3: Single Rod - 16 Mpa Series, Square Cover And Tie Rod Tightened Type (bores From 250 Mm To 500 Mm) |
| JIS B 8378-2:2000 | Pneumatic Fluid Power - Compressed Air Lubricators - Part 2: Test Methods To Determine The Main Characteristics To Be Included In Supplier's Literature |
| JIS B 8361:2000 | Hydraulic Fluid Power - General Rules Relating To Systems |
| JIS B 8400-1:2003 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm Part 1: Mounting interface surfaces without electrical connector |
| JIS B 8350-1:2003 | Hydraulic Fluid Power - Test Code For Determination Of Airborne Noise Levels - Part 1: Pumps |
| JIS B 8381:1995 | Pneumatic system - Flexible tubes - Tube fittings |
| JIS B 8375-3:2000 | Pneumatic Fluid Power - Five-port Directional Control Valves - Code System For Communication Of Valve Functions |
| JIS B 8356-4:2000 | Hydraulic Fluid Power - Filters - Evaluation Of Filter Performance Part 4: Filter Elements - Verification Of Material Compatibility With Fluid |
| JIS B 8404-2:2005 | Hydraulic Fluid Power - Cylinders - 16 Mpa Medium And 25 Mpa Series - Accessory Mounting Dimensions - Part 2: Rod End Spherical Eyes |
| JIS B 2292-1:2005 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 1: Inch series shown in metric units |
| JIS B 8393:2000 | Pneumatic Fluid Power - Standard Reference Atmosphere |
| JIS B 2351-5:2000 | Metallic Tube Connections For Fluid Power And General Use - Part 5: Test Methods For Threaded Hydraulic Fluid Power Connections |
| JIS B 8392-4:2003 | Compressed air Part 4: Test methods for solid particle content |
| JIS B 8351:1999 | Vane Pumps For Hydraulic Use |
| JIS B 8353-1:2006 | Hydraulic Fluid Power - Test Code For The Determination Of Sound Power Levels Of Pumps Using Sound Intensity Techniques: Engineering Method - Part 1: Pumps |
| JIS B 8659-1:2000 | Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 1: Test Methods For Four-way Directional Flow Control Valves |
| JIS B 8383:2000 | Hydraulic Fluid Power - Pumps And Motors - Geometric Displacements |
| JIS B 9932:2003 | Hydraulic Fluid Power - Calibration Of Liquid Automatic Particle Counters |
| JIS B 8404-5:2005 | Hydraulic Fluid Power - Cylinders - 16 Mpa Compact Series With Bores From 250 Mm To 500 Mm - Accessory Mounting Dimensions - Part 5: Rod End |
| JIS B 8389:2000 | Fluid Power And Components - Two-pin Electrical Plug Connectors With Earth Contact - Characteristics And Requirements |
| JIS B 8663:2001 | Hydraulic Fluid Power - Cylinders - Housing Dimensions For Rectangular-section-cut Bearing Rings For Pistons And Rods |
| JIS B 9935:2001 | Hydraulic Fluid Power - On-line Automatic Particle-counting Systems For Liquids - Methods Of Calibration And Validation |
| JIS B 8655:2002 | Test Methods For Electro-hydraulic Proportional Directional Series Flow Control Valves |
| JIS B 8394-2:2000 | Hydraulic Fluid Power - Housings For Elastomer-energized, Plastic-faced Seals - Dimensions And Tolerances - Part 2: Rod Seal Housings |
| JIS B 8350-3:2003 | Hydraulic Fluid Power - Test Code For Determination Of Airborne Noise Levels - Part 3: Pumps - Method Using A Parallelepiped Microphone Array |
| JIS B 2401:2005 | O-rings |
| JIS B 2410:2005 | O-rings - Suitability of elastomeric materials for industrial applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.