ISO/TS 16949:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
30-11-2018
Superseded by
Language(s)
English, Spanish, Castilian, French, Russian
Published date
12-06-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TS 16949:2009, in conjunction with ISO 9001:2008, defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products.
ISO/TS 16949:2009 is applicable to sites of the organization where customer-specified parts, for production and/or service, are manufactured.
Supporting functions, whether on-site or remote (such as design centres, corporate headquarters and distribution centres), form part of the site audit as they support the site, but cannot obtain stand-alone certification to ISO/TS 16949:2009.
ISO/TS 16949:2009 can be applied throughout the automotive supply chain.
| DocumentType |
Technical Specification
|
| Pages |
39
|
| ProductNote |
Superseded by IATF 16949:2016.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO/TS 16949 : 2009 AMD 1 2011 | Identical |
| DIN SPEC 1115;DIN ISO/TS 16949:2009-11 | Identical |
| FD ISO/TS 16949 : 2009 FD | Identical |
| TS ISO 16949:2011 | Identical |
| DD ISO/TS 16949 : 2009 | Identical |
| SN ISO/TS 16949 : 2010 | Identical |
| DIN ISO/TS 16949 : 2009 | Identical |
| SAC GB/T 18305 : 2003 | Identical |
| NBN ISO/TS 16949 : 2014 | Identical |
| UNI ISO TS 16949 : 2009 | Identical |
| PD ISO/TS 16949:2009 | Identical |
| BIS IS/ISO/TS 16949 : 2009 | Identical |
| NEN NPR ISO/TS 16949 : 2009 | Identical |
| UNE-ISO/TS 16949:2009 | Identical |
| CSA ISO TS 16949 : 2009 | Identical |
| CSA ISO/TS 16949 : 2009(R2015) | Identical |
| 08/30195548 DC : 0 | Identical |
| CSA ISO TS 16949 : 2009 : R2015 | Identical |
| DIN-Fachbericht 78:2002 | Corresponds |
| S.R. ISO TS 16949:2006 | Identical |
| NEN NVN ISO/TS 16949 : 2002 | Identical |
| BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
| 16/30320043 DC : 0 | BS ISO 26262-7 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 7: PRODUCTION, OPERATION, SERVICE AND DE-COMMISSIONING |
| 15/30322573 DC : 0 | BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES |
| 17/30325421 DC : 0 | BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| 15/30293075 DC : 0 | BS EN ISO 6789-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY |
| SAE USCAR 2 : 2013 | PERFORMANCE SPECIFICATION FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| BS EN 16590-3:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software |
| ISO 26262-8:2011 | Road vehicles Functional safety Part 8: Supporting processes |
| BS ISO 25119-3:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software |
| 16/30320028 DC : 0 | BS ISO 26262-2 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 2: MANAGEMENT OF FUNCTIONAL SAFETY |
| 13/30280048 DC : 0 | BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| BS ISO/IEC 33071:2016 | Information technology. Process assessment. An integrated process capability assessment model for Enterprise processes |
| BS EN 16590-2:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
| CEI UNI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| 13/30280041 DC : 0 | BS EN 16590-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| SAE USCAR 44 : 2017 | PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS |
| ISO/TR 14468:2010 | Selected illustrations of attribute agreement analysis |
| SAE J 2842 : 2015 | R-1234YF AND R744 DESIGN CRITERIA AND CERTIFICATION FOR OEM MOBILE AIR CONDITIONING EVAPORATOR AND SERVICE REPLACEMENTS |
| ISO 16232-1:2007 | Road vehicles Cleanliness of components of fluid circuits Part 1: Vocabulary |
| I.S. EN 16590-1:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED) |
| ISO 26262-7:2011 | Road vehicles Functional safety Part 7: Production and operation |
| ISO 6789-2:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty |
| I.S. EN 16590-4:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES (ISO 25119-4:2010 MODIFIED) |
| I.S. EN 16590-2:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED) |
| ASTM F 1470 : 2018 : REDLINE | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| UNE-ISO 39001:2013 | Road traffic safety (RTS) management systems - Requirements with guidance for use |
| ASTM E 2165 : 2001 | Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials (Withdrawn 2007) |
| IPC J STD 004 RUSSIAN : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 004 CHINESE : B | REQUIREMENTS FOR SOLDERING FLUXES |
| BS ISO 26262-1:2011 | Road vehicles. Functional safety Vocabulary |
| I.S. EN 16590-3:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE (ISO 25119-3:2010 MODIFIED) |
| DIN EN 16590-2:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| PD IEC/TS 62564-1:2016 | Process management for avionics. Aerospace qualified electronic components (AQEC) Integrated circuits and discrete semiconductors |
| 16/30320025 DC : 0 | BS ISO 26262-1 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 1: VOCABULARY |
| BS ISO/IEC 15944-9:2015 | Information technology. Business Operational View Business transaction traceability framework for commitment exchange |
| 14/30298720 DC : 0 | BS ISO/IEC 15944-9 - INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 9: BUSINESS TRANSACTION TRACEABILITY FRAMEWORK FOR COMMITMENT EXCHANGE |
| CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 | CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
| 17/30325424 DC : 0 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| DIN EN 16590-3:2015-04 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| SAE USCAR 30 : 2006 | PERFORMANCE SPECIFICATION FOR AUTOMOTIVE UNIVERSAL SERIAL BUS (USB) CONNECTION SYSTEM |
| DIN EN 16590-1:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| 08/30171133 DC : DRAFT FEB 2008 | BS ISO 20860-2 - ROAD VEHICLES - 50 IMPEDANCE RADIO FREQUENCY CONNECTION SYSTEM INTERFACE - PART 2: TEST PROCEDURES |
| ISO 26262-1:2011 | Road vehicles Functional safety Part 1: Vocabulary |
| BS ISO 26262-8:2011 | Road vehicles. Functional safety Supporting processes |
| CSA/ANSI PRD 1 : 2013(R2018) | PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| ISO 25119-3:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 3: Series development, hardware and software |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| UNE-EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| VDI 2891:2008-11 | Maintenance relevant criteria for purchase of machines |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
| VDI/VDE 2862 Blatt 1:2012-04 | Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry |
| VDI 5600 Blatt 1:2016-10 | Manufacturing execution systems (MES) |
| VDI 4084:2017-09 (Draft) | Corrective maintenance and remanufacturing of internal combustion engines - Terminology and processes |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| BS ISO 39001:2012 | Road traffic safety (RTS) management systems. Requirements with guidance for use |
| SAE J 2192 : 2016 | RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES |
| SAE J 3010 : 2015 | REGISTRATION AND CONFORMITY ASSESSMENT PROCESS FOR PASSENGER CARS AND LIGHT TRUCKS WHEELS |
| 17/30325430 DC : 0 | BS ISO 25119-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| 13/30280054 DC : 0 | BS EN 16590-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| 17/30325427 DC : 0 | BS ISO 25119-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| BS ISO 25119-1:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development |
| VDA 5005 : 2005 | TRACEABILITY OF VEHICLE COMPONENTS AND IDENTIFIABLY OF THEIR TECHNICAL DESIGN |
| 09/30179091 DC : 0 | BS ISO 26262-2 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 2: MANAGEMENT OF FUNCTIONAL SAFETY |
| CAN/CSA-ISO/IEC 15944-9:16 | Information technology Business Operational View Part 9: Business transaction traceability framework for commitment exchange (Adopted ISO/IEC 15944-9:2015, first edition, 2015-10-01) |
| IEC TS 62239-2:2017 | Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan |
| I.S. EN ISO 6789-2:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINLY (ISO 6789-2:2017) |
| BS ISO 26262-2:2011 | Road vehicles. Functional safety Management of functional safety |
| ISO/IEC 33071:2016 | Information technology — Process assessment — An integrated process capability assessment model for Enterprise processes |
| VDA 305-100 : 2014 | RECOMMENDATION FOR INTEGRATING ACTUATORS OF ELECTRIC PARKING BRAKES INTO ESC CONTROL UNITS |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| CSA/ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| ISO 39001:2012 | Road traffic safety (RTS) management systems — Requirements with guidance for use |
| IEC TS 62239-1:2015 | Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan |
| I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| UNI EN 16590-2 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 2: Concept phase |
| ISO 15484:2008 | Road vehicles Brake lining friction materials Product definition and quality assurance |
| UNI EN 16590-4 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| PD IEC/TS 62239-2:2017 | Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan |
| BS EN 16590-1:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems General principles for design and development |
| BS ISO 20860-2:2009 | Road vehicles. 50 ohms impedance radio frequency connection system interface Test procedures |
| BS ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
| VDA 250 : 2013 | MATERIAL LABORATORY ASSESSMENT |
| BS EN ISO 6789-2:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements for calibration and determination of measurement uncertainty |
| 16/30335990 DC : 0 | BS ISO 26262-11 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 11: GUIDELINE ON APPLICATION OF ISO 26262 TO SEMICONDUCTORS |
| PD ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| 13/30280051 DC : 0 | BS EN 16590-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| ISO 20860-2:2009 | Road vehicles — 50 ohms impedance radio frequency connection system interface — Part 2: Test procedures |
| 06/30079861 DC : DRAFT JULY 2006 | ISO 15484 - ROAD VEHICLES - BRAKE LININGS FRICTION MATERIALS - PRODUCT DEFINITION AND QUALITY ASSURANCE |
| BIS IS/ISO 9000 : 2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| BS ISO 28580:2009 | Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results |
| ISO/IEC Guide 53:2005 | Conformity assessment Guidance on the use of an organization's quality management system in product certification |
| SAE J 3061 : 2016 | CYBERSECURITY GUIDEBOOK FOR CYBER-PHYSICAL VEHICLE SYSTEMS |
| UNI CEI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| ISO/IEC 15944-9:2015 | Information technology — Business operational view — Part 9: Business transaction traceability framework for commitment exchange |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| IEC TS 62686-1:2015 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors |
| ISO 28580:2009 | Passenger car, truck and bus tyres Methods of measuring rolling resistance Single point test and correlation of measurement results |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| PD IEC/TS 62239-1:2015 | Process management for avionics. Management plan Preparation and maintenance of an electronic components management plan |
| ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
| UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
| PD IEC/TS 62686-1:2015 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for high reliability integrated circuits and discrete semiconductors |
| EN ISO 6789-2:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017) |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| EN 16590-4:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
| EN 16590-3:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| EN 16590-2:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| EN 16590-1:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| 16/30320046 DC : 0 | BS ISO 26262-8 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 8: SUPPORTING PROCESSES |
| BS ISO 26262-7:2011 | Road vehicles. Functional safety Production and operation |
| BS ISO 15484:2008 | Road vehicles. Brake lining friction materials. Product Definition and quality assurance |
| BS ISO 16232-1:2007 | Road vehicles. Cleanliness of components of fluid circuits Vocabulary |
| DIN EN 16590-4:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
| ISO 26262-2:2011 | Road vehicles Functional safety Part 2: Management of functional safety |
| DD IEC/TS 62239:2003 | Process management for avionics. Preparation of an electronic components management plan |
| BS EN 16590-4:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Production, operation, modification and supporting processes |
| 09/30179106 DC : 0 | BS ISO 26262-7 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 7: PRODUCTION AND OPERATION |
| 10/30208983 DC : 0 | BS ISO 13053-2 - QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| BS ISO 25119-4:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Production, operation, modification and supporting processes |
| 09/30179109 DC : 0 | BS ISO 26262-8 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 8: SUPPORTING PROCESSES |
| DD IEC TS 62564-1 : DRAFT SEP 2011 | PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE QUALIFIED ELECTRONIC COMPONENTS (AQEC) - PART 1: INTEGRATED CIRCUITS AND DISCRETE SEMICONDUCTORS |
| PD ISO/IEC Guide 53:2005 | Conformity assessment. Guidance on the use of an organization\'s quality management system in product certification |
| 04/30107387 DC : DRAFT JUN 2004 | ISO/IEC GUIDE 53 - CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| SAE J 1976 : 2012 | OUTDOOR WEATHERING OF EXTERIOR MATERIALS |
| VDA 4959 : 2015 | RECOMMENDATION FOR SCHEDULE MANAGEMENT - REQUIREMENTS RELATING TO A SCHEDULE MANAGEMENT TOOL FOR THE AUTOMOTIVE INDUSTRY |
| UNI EN 16590-3 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| UNI EN 16590-1 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| ISO 25119-4:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 4: Production, operation, modification and supporting processes |
| SAE USCAR 2-5 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| IECQ 03-3-2:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 3-2: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT - AUTOMOTIVE QUALIFICATION PROGRAMME (IECQ AC-AQP) |
| SAE J 2911 : 2017 | PROCEDURE FOR CERTIFICATION THAT REQUIREMENTS FOR MOBILE AIR CONDITIONING SYSTEM COMPONENTS, SERVICE EQUIPMENT, AND SERVICE TECHNICIAN TRAINING MEET SAE J STANDARDS |
| IEC TS 62564-1:2016 | Process management for avionics - Aerospace qualified electronic components (AQEC) - Part 1: Integrated circuits and discrete semiconductors |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| DIN EN ISO 6789-2:2017-07 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY (ISO 6789-2:2017) |
| CSA ISO 9000 : 2016 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| ASME Y14.46 : 2017 | PRODUCT DEFINITION FOR ADDITIVE MANUFACTURING |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| SAE USCAR30-1:2006(S2023) | Performance Specification for Automotive Universal Serial Bus (USB) Connection System |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 10015:1999 | Quality management Guidelines for training |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| IEC 61160:2005 | Design review |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| ISO 10006:2003 | Quality management systems Guidelines for quality management in projects |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| IEC 60300-1:2014 | Dependability management - Part 1: Guidance for management and application |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.