ISO/TS 14907-1:2015
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English
Published date
01-09-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
ISO/TS 14907-1:2015 is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated.
ISO/TS 14907-1:2015 identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters:
? functionality;
? quality;
? referenced pre-tests.
An overview of the tests and parameters provided by this part of ISO/TS 14907 is given in 5.1 and 5.2.
ISO/TS 14907-1:2015 describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this part of ISO/TS 14907 provide instructions to evaluate the test results.
| DocumentType |
Technical Specification
|
| Pages |
91
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI CEN ISO/TS 14907-1:2015 | Identical |
| NEN NVN CEN ISO/TS 14907-1 : 2015 | Identical |
| S.R. CEN ISO/TS 14907-1:2015 | Identical |
| UNE-CEN ISO/TS 14907-1:2015 | Identical |
| PD CEN ISO/TS 14907-1:2015 | Identical |
| CEN ISO/TS 14907-1:2015 | Identical |
| DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 | Identical |
| DIN ISO/TS 14907-1:2005-07 | Identical |
| UNI CEN ISO/TS 14907-1 : 2010 | Identical |
| I.S. CEN ISO TS 14907-1:2005 | Identical |
| DD CEN ISO/TS 14907-1:2010 | Identical |
| NEN NPR CEN ISO/TS 14907-1 : 2010 C1 2010 | Identical |
| NBN ENV ISO 14907-1 : 2000 | Identical |
| CEN ISO/TS 14907-2:2016 | Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016) |
| UNI CEN ISO/TS 25110 : 2013 | ELECTRONIC FEE COLLECTION - INTERFACE DEFINITION FOR ON-BOARD ACCOUNT USING INTEGRATED CIRCUIT CARD (ICC) |
| 12/30268705 DC : 0 | BS EN 15509 - ELECTRONIC FEE COLLECTION - INTEROPERABILITY APPLICATION PROFILE FOR DSRC |
| PD CEN ISO/TS 14907-2:2016 | Electronic fee collection. Test procedures for user and fixed equipment Conformance test for the on-board unit application interface |
| PD CEN/TR 16968:2016 | Electronic Fee Collection. Assessment of security measures for applications using Dedicated Short-Range Communication |
| PD CEN ISO/TS 25110:2013 | Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC) |
| EN ISO 25110:2017 | Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017) |
| I.S. EN 15509:2014 | ELECTRONIC FEE COLLECTION - INTEROPERABILITY APPLICATION PROFILE FOR DSRC |
| CEN ISO/TS 25110:2013 | Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013) |
| 17/30351770 DC : 0 | BS EN ISO 25110 - ELECTRONIC FEE COLLECTION - INTERFACE DEFINITION FOR ON-BOARD ACCOUNT USING INTEGRATED CIRCUIT CARD (ICC) |
| BS EN 16312:2013 | Intelligent transport systems. Automatic Vehicle and Equipment Registration (AVI/AEI). Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication |
| 13/30286411 DC : 0 | BS EN ISO 12855 - ELECTRONIC FEE COLLECTION - INFORMATION EXCHANGE BETWEEN SERVICE PROVISION AND TOLL CHARGING |
| DD CEN ISO/TS 14907-2:2011 | Electronic fee collection. Test procedures for user and fixed equipment Conformance test for the onboard unit application interface |
| 09/30195191 DC : 0 | BS ISO 24101-2 - INTELLIGENT TRANSPORT SYSTEMS - COMMUNICATIONS ACCESS FOR LAND MOBILES (CALM) - APPLICATION MANAGEMENT - PART 2: CONFORMANCE TEST |
| BS EN ISO 12855:2015 | Electronic fee collection. Information exchange between service provision and toll charging |
| CEN/TR 16968:2016 | Electronic Fee Collection - Assessment of security measures for applications using Dedicated Short-Range Communication |
| ISO/TS 25110:2013 | Electronic fee collection Interface definition for on-board account using integrated circuit card (ICC) |
| EN 16312:2013 | Intelligent transport systems - Automatic Vehicle and Equipment Registration (AVI/AEI) - Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication |
| UNI EN 15509 : 2014 | ELECTRONIC FEE COLLECTION - INTEROPERABILITY APPLICATION PROFILE FOR DSRC |
| I.S. EN ISO 25110:2017 | ELECTRONIC FEE COLLECTION - INTERFACE DEFINITION FOR ON-BOARD ACCOUNT USING INTEGRATED CIRCUIT CARD (ICC) (ISO 25110:2017) |
| I.S. EN 16312:2013 | INTELLIGENT TRANSPORT SYSTEMS - AUTOMATIC VEHICLE AND EQUIPMENT REGISTRATION (AVI/AEI) - INTEROPERABLE APPLICATION PROFILE FOR AVI/AEI AND ELECTRONIC REGISTER IDENTIFICATION USING DEDICATED SHORT RANGE COMMUNICATION |
| DD CEN ISO/TS 25110:2008 | Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC) |
| I.S. EN ISO 12855:2015 | ELECTRONIC FEE COLLECTION - INFORMATION EXCHANGE BETWEEN SERVICE PROVISION AND TOLL CHARGING (ISO 12855:2015) |
| PREN 15509 : DRAFT 2012 | ELECTRONIC FEE COLLECTION - INTEROPERABILITY APPLICATION PROFILE FOR DSRC |
| S.R. CEN/TR 16968:2016 | ELECTRONIC FEE COLLECTION - ASSESSMENT OF SECURITY MEASURES FOR APPLICATIONS USING DEDICATED SHORT-RANGE COMMUNICATION |
| ISO 12855:2015 | Electronic fee collection Information exchange between service provision and toll charging |
| EN 15509:2014 | Electronic fee collection - Interoperability application profile for DSRC |
| EN ISO 12855:2015 | Electronic fee collection - Information exchange between service provision and toll charging (ISO 12855:2015) |
| UNI EN 16312 : 2013 | INTELLIGENT TRANSPORT SYSTEMS - AUTOMATIC VEHICLE AND EQUIPMENT REGISTRATION (AVI/AEI) - INTEROPERABLE APPLICATION PROFILE FOR AVI/AEI AND ELECTRONIC REGISTER IDENTIFICATION USING DEDICATED SHORT RANGE COMMUNICATION |
| S.R. CEN ISO/TS 25110:2013 | ELECTRONIC FEE COLLECTION - INTERFACE DEFINITION FOR ON-BOARD ACCOUNT USING INTEGRATED CIRCUIT CARD (ICC) (ISO/TS 25110:2013) |
| I.S. CEN ISO TS 14907-2:2006 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 2: CONFORMANCE TEST FOR THE ONBOARD UNIT APPLICATION INTERFACE |
| BS EN ISO 25110:2017 | Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC) |
| S.R. CEN ISO/TS 14907-2:2016 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 2: CONFORMANCE TEST FOR THE ONBOARD UNIT APPLICATION INTERFACE (ISO/TS 14907-2:2011) |
| ISO 25110:2017 | Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC) |
| ISO/TS 14907-2:2016 | Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on-board unit application interface |
| BS EN 15509:2014 | Electronic fee collection. Interoperability application profile for DSRC |
| EN 13372:2004 | Road Transport and Traffic Telematics (RTTT) - Dedicated short-range communication - Profiles for RTTT applications |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 2382-1:1993 | Information technology Vocabulary Part 1: Fundamental terms |
| IEC 60068-2-5:2010 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| ISO/IEC 15408-2:2008 | Information technology — Security techniques — Evaluation criteria for IT security — Part 2: Security functional components |
| IEC GUIDE 107:2014 | Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| IEC 60068-2-43:2003 | Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| IEC 60068-2-49:1983 | Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections |
| ENV 50204 : DRAFT 1995 | RADIATED ELECTROMAGNETIC FIELD FROM DIGITAL RADIO TELEPHONES - IMMUNITY TEST |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ISO/IEC 15408-3:2008 | Information technology — Security techniques — Evaluation criteria for IT security — Part 3: Security assurance components |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO/TS 14907-2:2016 | Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on-board unit application interface |
| ISO/TS 17444-2:2017 | Electronic fee collection — Charging performance — Part 2: Examination framework |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| TS 102 486-1-2 : 1.2.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT); TEST SPECIFICATIONS FOR DEDICATED SHORT RANGE COMMUNICATION (DSRC) TRANSMISSION EQUIPMENT; PART 1: DSRC DATA LINK LAYER: MEDIUM ACCESS AND LOGICAL LINK CONTROL; SUB-PART 2: TEST SUITE STRUCTURE AND TEST PURPOSES (TSS&TP) |
| EN 300 674-1 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT); DEDICATED SHORT RANGE COMMUNICATION (DSRC) TRANSMISSION EQUIPMENT (500 KBIT/S / 250 KBIT/S) OPERATING IN THE 5,8 GHZ INDUSTRIAL, SCIENTIFIC AND MEDICAL (ISM) BAND; PART 1: GENERAL CHARACTERISTICS AND TEST METHODS FOR ROAD SIDE UNITS (RSU) AND ON-BOARD UNITS (OBU) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 14906:2011 | Electronic fee collection Application interface definition for dedicated short-range communication |
| ISO/TS 17444-1:2017 | Electronic fee collection — Charging performance — Part 1: Metrics |
| TS 102 486-2-2 : 1.2.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT); TEST SPECIFICATIONS FOR DEDICATED SHORT RANGE COMMUNICATION (DSRC) TRANSMISSION EQUIPMENT; PART 2: DSRC APPLICATION LAYER; SUB-PART 2: TEST SUITE STRUCTURE AND TEST PURPOSES (TSS&TP) |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| EN 12834:2003 | Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC application layer |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO/IEC 15408-1:2009 | Information technology — Security techniques — Evaluation criteria for IT security — Part 1: Introduction and general model |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 12795:2003 | Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link layer: medium access and logical link control |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
| ISO/TS 19299:2015 | Electronic fee collection Security framework |
| EN 50413 : 2008 AMD 1 2013 | BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 12253:2004 | Road transport and traffic telematics - Dedicated short-range communication - Physical layer using microwave at 5,8 GHz |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| IEC 60068-2-46:1982 | Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
| EN 60721-3-3 : 95 AMD 2 97 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.