ISO/TR 19961:2010
Current
Current
The latest, up-to-date edition.
Cranes — Safety code on mobile cranes
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Russian
Published date
26-10-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TR 19661:2010 provides a guide to International Standards applicable to mobile cranes (crawler cranes, railway cranes, wheel-mounted cranes and any variations thereof that retain the same fundamental characteristics) and a summary of related provisions. Special adaptations of the general types of machine covered, where applicable, also fall within its scope.
| Committee |
ISO/TC 96/SC 6
|
| DocumentType |
Technical Report
|
| Pages |
8
|
| ProductNote |
THIS STANDARD ALSO REFERENCE TO ISO 1210-1
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PD ISO/TR 19961:2010 | Identical |
| ISO 23814:2009 | Cranes — Competency requirements for crane inspectors |
| ISO 9373:1989 | Cranes and related equipment Accuracy requirements for measuring parameters during testing |
| ISO 4308-1:2003 | Cranes and lifting appliances Selection of wire ropes Part 1: General |
| ISO 7363:1986 | Cranes and lifting appliances — Technical characteristics and acceptance documents |
| ISO 11660-2:2015 | Cranes Access, guards and restraints Part 2: Mobile cranes |
| ISO 4302:2016 | Cranes — Wind load assessment |
| ISO 11660-1:2008 | Cranes — Access, guards and restraints — Part 1: General |
| ISO 10245-2:2014 | Cranes — Limiting and indicating devices — Part 2: Mobile cranes |
| ISO 15513:2000 | Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| ISO 12480-1:1997 | Cranes — Safe use — Part 1: General |
| ISO 9926-1:1990 | Cranes — Training of drivers — Part 1: General |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO 9928-2:2014 | Cranes Crane operating manual Part 2: Mobile cranes |
| ISO 4310:2009 | Cranes — Test code and procedures |
| ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
| ISO 8566-2:2016 | Cranes — Cabins and control stations — Part 2: Mobile cranes |
| ISO 10972-2:2009 | Cranes Requirements for mechanisms Part 2: Mobile cranes |
| ISO 12478-1:1997 | Cranes — Maintenance manual — Part 1: General |
| ISO 13200:1995 | Cranes — Safety signs and hazard pictorials — General principles |
| ISO 4308-2:1988 | Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization |
| ISO 11662-1:1995 | Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii |
| ISO 8566-1:2010 | Cranes Cabins and control stations Part 1: General |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 9927-1:2013 | Cranes — Inspections — Part 1: General |
| ISO 9374-1:1989 | Cranes — Information to be provided — Part 1: General |
| ISO 14518:2005 | Cranes — Requirements for test loads |
| ISO 7752-2:2011 | Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes |
| ISO 10973:1995 | Cranes — Spare parts manual |
| ISO 4301-2:2009 | Cranes Classification Part 2: Mobile cranes |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| ISO 8087:1985 | Mobile cranes Drum and sheave sizes |
| ISO/TS 15696:2000 | Cranes List of equivalent terms |
| ISO 7296-2:1996 | Cranes Graphical symbols Part 2: Mobile cranes |
| ISO 23815-1:2007 | Cranes Maintenance Part 1: General |
| ISO 23853:2004 | Cranes Training of slingers and signallers |
| ISO 11629:2004 | Cranes Measurement of the mass of a crane and its components |
| ISO 8686-2:2004 | Cranes Design principles for loads and load combinations Part 2: Mobile cranes |
| ISO 7752-1:2010 | Cranes Control layout and characteristics Part 1: General principles |
| ISO 13202:2003 | Cranes Measurement of velocity and time parameters |
| ISO 10245-1:2008 | Cranes Limiting and indicating devices Part 1: General |
| ISO 23813:2007 | Cranes Training of appointed persons |
| ISO 11994:1997 | Cranes Availability Vocabulary |
| ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
| ISO 10972-1:1998 | Cranes — Requirements for mechanisms — Part 1: General |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| ISO 4306-2:1994 | Cranes — Vocabulary — Part 2: Mobile cranes |
| ISO 9942-1:2015 | Cranes Information labels Part 1: General |
| ISO 2374:1983 | Lifting appliances Range of maximum capacities for basic models |
| ISO 11661:1998 | Mobile cranes Presentation of rated capacity charts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.